Jump to content

Georges Workbench

Rate this topic


Georgeconna
 Share

Recommended Posts

Well I got a couple of my own to do and got 4 more for a chap I know to do for him so they were sitting there calling to be started. Although GD ones was Superglued and an immaculate job too I decided to go down the soldering route for these. I wonder why but anyhow this is the 1st one with about 4 hours work in it, Try to figure out the couplings not for the ends and then the white metal bits n bobs, had to give it a break for a short while so I took a few snaps. I found I had to look a a good few shots of these wagons to get where things went, I think a few more diagrams for chaps that dont know the ins and out of these wagons would help immensely. I have a few Roxly coaches to make and the instructions are all hand written then I read about Queenposts!!, WTH are they I thought, I was not long finding out but certainly a few piccys would he of great assistance.

 

.463_6343.jpg

463_6339.jpg

463_6340.jpg

463_6341.jpg

Link to comment
Share on other sites

  • 11 months later...

Hi Lads,

 

Just tackling two of the fine kits from SSM. Went for the soldering option for all the etch. Everything goes together nicely with only the roof being the main challenge but when rolled the profile it Soldered on quite nicely. I used Carrs solder with 70 and 177 degree used. I rolled the roof using a Scalpel knife handle and a Tea towel Wrapped over itself like a cushion of rolled the brass on that.

 

rsz_488_8891.jpg

 

rsz_488_8890.jpg

 

Primer now next and then the dreaded yellow, I hate painting yellow!

Link to comment
Share on other sites

Thanks for the comments lads.

 

Don't want to bore you lads with kit building bit here are a few more bits passing through on the Work bench this week.

 

MIR Resin Flats with Keg loads, Mir 4W Flats and Containers (Not finished just yet), MIR 4 Wheel Cement Bubbles.

 

488_8889.jpg

 

The eagled eye amongst you will notice the Bubbles are up for sale on Done Deal if anyone is interested.

488_8892.jpg

488_8893.jpg

488_8882.jpg

488_8883.jpg

488_8884.jpg

488_8885.jpg

488_8886.jpg

488_8887.jpg

488_8888.jpg

Edited by Georgeconna
Link to comment
Share on other sites

Cabin is fine rich,Cold thee evenings though. Kinda wish a spent a few more pound for a better one really. Great as a Sanctuary with the radio for my friend.

 

Trying to Ween off this building lark now shortly and will focus on planning a Southern Region layout probably 8 ft Scenic and 4ft fiddle yard before the Magnum opus and how to work out how to intersperse Irish with my Southern stuff!!

 

Plenty of inspiration here though for the time being in the layout sections!

 

There just never enough time is there.

 

Appreciate the comments lads.

Link to comment
Share on other sites

Here 4 of the Only Fab Studio Scale Models Brass flat Wagons. I must admit to have great satisfaction in building these and seeing them run around behind a Loco. After making one complete wagon I decided to adjust they way I approached these.

 

I started with the task of cutting and folding each part off of the etch for the remaining 3 wagons. This Took about 4 hours to do, Each wagon took about an hour then to solder. Primer and painting and a small bit of weathering sets them off. Sorry about the quality of the photos, The resizer seem to take some clarity off of them and my laptop is kaput.

 

489_8942.jpg

489_8940.jpg

489_8941.jpg

Link to comment
Share on other sites

Final Installment is the Plough vans, Used Holts Primer for to cover the brass. Tidied up any gaps with Squadron putty, Tidied up the putty then with a cotton bud and some nail varnish remover to remove any excess. The Nail Varnish remover makes the putty nice and plyable.

 

I then sparyed some preshading with Humbrol Black, this takes the flat boring yellow finish and creates some dark and light patches. You can do this with white as well to brighten colours up.

 

I noticed that I put on the steps the wrong way with the cutout facing outward and I think one of the roofs should have it panel lines lining up with he Side panel lines but we live and learn!!

 

489_8939.jpg

489_8936.jpg

489_8937.jpg

489_8938.jpg

Edited by Georgeconna
Link to comment
Share on other sites

Hi George , what a finish you have done on the ssm flats, outstanding,

So realistic .every so often I look at my etchs and think one day! ,

No way could I achieve that sort of finish,

You are gifted my friend.

 

Cheers. John.

 

Afflicted more Likely John!! small bit of time and patience kid, right tools and solder and you will have no issues.

 

On the couplings. There a standard NEM couplings and are just cemented onto the bogie etch and there is enough space for these to lie flat and not foul the buffer beam. The Kaydees are possibly thicker so the buffer beam might need to be reduced to accommodate the coupling? Would you need to mount the Kaydees onto the wagon body itself.

 

I have a few kaydees lying about and will take a look tonight

 

Might change the couplings on the brake vans too as they look bloody awful.

Link to comment
Share on other sites

I love when you're away in the real world, changing nappies and so on, and you come back to a thread like this bursting with photos of top notch stuff. Even moreso when Wrenn's looking for you (Don't answer :P) and Weshty uses the word "kink" with such wild abandon.

 

The 071 is beautifully subtle, the 4 wheel flats look far better than they should, the pocket containers look far better than I expected. I thought the lack of length would make them look like MK3 shorties, but damn do they look like they are languishing in a siding beside a St. Josephs in Limerick.

 

As for the 42' flats, I've ditched the superglue, and all are soldered now - I love the tonal variation across them from almost pure grey to the full on solebar bauxite.

 

I have to say I'd have saved my sanity on the plough with white primer, rather than doing the underspraying lark and a bazillion coats of yellow, but I love to see your aircraft techniques slip so neatly in here. Such a tidy finish, your Client, one assumes is one of IRM's and looking for top quality from loco to tail....?

 

Anyway, I'd doff my cap, but I've done it so many times on this thread, it's fallen off. Savage work altogether.

 

Richie.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

Terms of Use