Jump to content

MikeO Workbench

Rate this topic


MikeO
 Share

Recommended Posts

In April I bought a copy the IRRS booklet Great Northern Railway (Ireland) Carriage Diagrams Part 5 Non Passenger Stock. The booklet contains drawings of a number of GNR 4, 6 and bogie wagons. I saw a bogie parcel wagon in Desmond Coakham's book and thought that it would make a god model. However the book did not have any dimensions so I was delighted to get the IRRS booklet which had all the information I needed.

 

In may I started to make a P1 parcel van mainly from plastic sheeting but enhanced with card and some brass tube. The only part I did not make was the bogies these are N gauge society kits.

 

The following photos show roughly the progress in making the wagon.

 

The chassis is made from mounting board. The bogies are attached by means of a small piece of brass tube glued into the mounting board. the board id raised above the wheels of the bogie by a washer which also provides a little weight.

 

GNR P1 chassis cropped.jpg

 

This view shows the side, the other side is the same.

 

GNR P1 side cropped.jpg

 

I put some generic boxes inside as I had glazed the windows but nothing can be seen inside when the roof is on

 

GNR P1 inside cropped.jpg

 

As can be seen the windows are too small in this scale to see anything. For the louvres I tried scoring the plastic but with little success

 

GNR P1 initial window.jpg

 

The roof made from card has been added together with details on the doors and chassis

 

GNR P1 side roof cropped.jpg

 

This view show one end, the other being the same

 

GNR P1 end cropped.jpeg

 

The final stage was the painting and lettering. the following photos show the completed wagon. The lettering and numbering were done on the computer. I have given the wagon a worn look.

 

GNR P1 painted  side closeup 3.jpg

 

GNR P1 painted  rear.jpg

 

MikeO

GNR P1 painted side.jpg

Link to comment
Share on other sites

  • 1 month later...

A few photos of the making of the GNR Grain wagon. The wagon is pictured on my T-Trak layout thread. Here I have posted 3 photos of how it came together. Basically this is a scan of a drawing reduced to N scale and coloured on the computer. The sides and the ends were then printed and glued on to card. The chassis is mounting board and the bogies are 25y bogies from the N gauge society. I think that given the small size of the wagon, a smaller bogies would be better.

 

The roof and the loading hatches are made from card as are the smaller inspection hatches on the sides. The ladder is plastic and was originally part of a Peco tanker.

 

GNR grain wagon initial changes end cropped.jpg

 

GNR grain wagon initial changes side 2 cropped.jpg

 

This is the final painted and numbered version. The lettering and the numbers are part of the computer printed sides. The computer coloured sides had a reddish tint so I painted them a lighter shade of grey.

 

GNR grain wagon painted side  6 cropped.jpg

 

The original drawing did not have the name Guinness or numbers on it so I am guessing that if this did have the name Guinness on the sides it would be partly obscured by the ladder.

 

MikeO

Edited by MikeO
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

Terms of Use