.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
A half decent van train?
Entry posted by David Holman
11,233 views
Recently been working on some GNRI vans, from drawings found via the website. These are 9 ton versions & were made from my own resin castings. A picture of the master is also shown.
As I've mentioned before, there is nothing difficult about making your own castings and there has been a regular advert in Railway Modeller for the all important materials. however, have found that the silicon mould material has a definite shelf life & the stuff I used was a bit too viscous, resulting in some bubbles. Think I will make another mould & add some detail differences to the master to make what I assume were later versions of the vans, with different door fastenings. either way, it seems from photos that one can never have enough vans on an Irish layout!
The eagle eyed amongst you may just notice that the trackwork has been weathered somewhat, prior to getting busy on the ground cover over the next few weeks. No less than 9 tree skeletons are in the process of being coated with PVA/filler & I am looking forward to getting some colour on the layout. In the meantime, have also been building brake vans, so will hopefully be adding pics of these in the next couple of weeks.[attachment=:name]
6 Comments
Recommended Comments