.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Arigna Town developments
Entry posted by David Holman
29,855 views
As it has been a while, thought I'd bring you up to date on what is happening on the layout. Much has been covered in the workbench section, but these notes will try to bring it all together.
The layout is effectively complete, as far as scenery goes, so work since the summer has concentrated on stock and operation. For the latter, new LED lighting strips have been fitted, cutting power consumption down from 480 watts to 150, with [i think] sharper light too. A fair bit less heat as well! The fiddle yard bolts needed attention after the Uckfield show, so these has also been strengthened, while the cassette for the railbus in the fiddle yard has been rebuilt to enable power and alignment without any leads or clips. This simply uses screws going through the aluminium angle & 80thou plasticard base, which then sit on brass plates, which are wired to the incoming tracks. Wrote this up for the Model Railway Journal Christmas Competition in 2013 and in the last couple of weeks heard I'd come runner up. Can't be bad as this gives me two years subscription.
A new project is underway, to build a 'Pilgrim's Train'. These were regular sites on both CIE and GNRI. Mine takes advantage of the new Tyrconnel G2 2-4-0 and a rake of 6 wheel coaches. One of the latter is approaching the paint shop. It is another Tyrconnel etched brass kit. The other two will be scratchbuilt from plastic, using the Alphagraphix card kits as drawings. Am hoping the full train will be available for York at Easter.
Before then, the layout has another outing, this time at the Orpington show [small but very friendly & always with some very good models] on the second weekend of January. This takes place at the wonderfully named Pratts Bottom village hall, just up the road from Badger's Mount. I kid you not...
5 Comments
Recommended Comments