richrua

Ok, so it will be a very small 'inglenook' type shunting layout with an extra fiddle yard/board . I also ran the track from board edge to edge at the back so that I could make another section at a later date. A modular idea - as I have several of these ply wood sheets ready cut. But that is for the future. (In the past i have always moved on to more and more and then never actually completed a layout , or close to complete anyway!) I'll try to attach a plan. 

Hi all. It has been quite some time since I've been on here. (This has been down to some general fatigue and aches and pains, along with a hectic family life, new job and just not having much time) . Any way, I felt less and less like going to the attic, so I took the decision to run down the attic layout and work on a simple micro layout that could be stowed away easily. My mind was made up when my father in law gave me a stock of wood off cuts including  a number of ply boards cut to about 8" by 3ft , and some more a little shorter. As soon as I saw them I started thinking "layout, layout". I'm recycling most railway items from previous efforts to keep the cost down. Here's a few  snaps of work so far: 

Wow. What a great looking wagon. What's the maximum era for these ? I mean from when and to when did they run ?  

Oh God I'm going to be broke again! That looks great.  Not far off now! Support your local model shops on this one. We've lost too many on the island already. 

Just shared the photo because I thought people would like to see it. Not endorsing a particular shop in any way but that's me told.

https://www.hattons.co.uk/454197/Murphy_Models_MM0127_Class_121_127_in_Irish_Rail_livery_Price_is_estimated_we_will_notify_you_if_pr/StockDetail.aspx

Indeed it is 

Looks to me like it was a repair wall or replacement at a much later date. You could finish that section in stone to match the rest I'd say, if modelling an earlier period maybe.  I wonder what was there before the repair / rebuild ?? 

That's great David thanks I'll give it a look

Here is the building in situ in the new more modern end of the layout. I built a container crane too but I'm starting to think it would overwhelm the scene. I might put a picture up for advice. Next I have a lot of scenic  work behind to finish and some track adjustments around the corner from this area. Keep me out of trouble. 

The finish is a scalescenes sheet ashlar ?? printout in black and white and then I washed it over with very thin black tinted wash to dull it down. Yes I based it loosely on kingscourt. I'm planning a small cement facility for the right hand side , which of course was not at kingscourt. 

Hi guys. The layout has undergone some remodelling and rethinking to make it more accessible. I've made room for a small container yard .  Here is a modern grubby office i made for the yard. More pics of the changes to follow layer. 

Which of these liveries would have had the longest time span would you say ? 

I sent you a private message there Rosslare Ranger

Hi Glenderg. Do you still want this a class kit ?

Thanks

R

Grand. Sold so!

For sale, six JM design CIE coach sides. To make 3 coaches. Partially complete. 

Sold as seen, in green with an eau d nil stripe. One not yet started. Partially completed bodies included as shown. I can't find the rest of the donor dapol coaches. If I can find the roofs etc I'll throw them in too at no extra. 

£40 + £ 5 postage ireland/UK. Elsewhere at cost.

Paypal for payment please.

Hi folks. I have a partially completed A Class kit . It has some brass detailing from studio scale models applied and is undercoated. (Note it is the body and bogie  sides only, these kits require a class 55 chassis to complete.)Sold as seen (but it is in good condition). payment via PayPal please. £30 + £5 postage ireland/UK. Elsewhere at cost. 

I stuck one of your flyers up on my bedroom wall. 

The wife is not happy.

Wow. Look great alright. I'll hopefully order up gradually over the next few months. 

Just been working on a simple system for allowing me to use small cassette s to add/ turn/ remove stock. I settled on a slide in idea. The guides should keep the track aligned, which will be fixed to the wooden slide part of the cassette. The cassettes won't be long - about 2 ft. The supporting board just slides in on bolts for easy removal, I really want to keep this layout to a limited size. Crocodile clips will do for power to the cassettes for now, probably upgrade to a more permanent power system at some point.

I've now added in the point motors and tidied up the wiring a bit. The point motors are in good nick and recycled from the attic layout. Also recycled is the expensive ish but very useful DCC concepts point motors controller that lets me run the points off the NCE powercab. Bit of a test run with some stock too.

You can see where I've  reused boards. Also, I've been reminded of how wonderful the baby gm s are . Well suited for shunting layouts as they run so well. 

The track is now fixed . Test running this evening after soldering the droppers to the power bus. It works... and is a slightly neater job than it looks in the pics!!

Progress at this stage is slow but thorough. Track underlay is down. Testing the track now with different rolling stock. Trusty power cab for dcc control. Next I suppose wiring droppers, fixing the track down and point motors. 

Thanks! It's good to be doing a bit!