Noel

It's alive! it's aalivee!

 

. . .

 

Installed the chip tonight and after a lot of jiggery-poke it came alive, very messy running at first but some dismantling and changing wheel positions I got it running like a rusty old steam loco on one cylinder. After a drop of more oil, adjusting the quartering to the best spot, and when the motor warmed up it started to run pretty OK, it's probably fairly prototypical!!

 

. . .

Hi Eoin. Well done. I found the same running issues with Bachmann split chassis after DCC conversion. Effectively due to the stiffness after putting the chassis sandwich back together again they needed to be run-in again. I've never managed to get a split chassis running as smoothly again once I had split it such are the minute tolerances. I blew one decoder such was the high current, so created temporary wiring connectors so it could be run as DC for running in, and left for an hour to run around an oval. It was an improvement but never quite as smooth as it had been out of the box. However with your model engineering skills I expect you will have greater success. Noel

Sides back together after reassembly.

That is awesome scratch build modelling

. . .

 

This has resulted in the bubbles slipping back to a late September 2017 delivery. However, after the standard we have set with the ballast wagons, we felt it’s vital that you get the very best 4mm scale model of the most iconic of Irish wagons.

 

. . .

Hi Fran.

Do you know of the likely shipping date in September? Anticipation is growing as it's now just weeks away. Thanks

Noel

I'm surprised how angular the front face of 2660 looks. I always thought they were more "roundy".

Hmm, it has a sort of NIR look about the fabrication.

That signal box is a cracker.

 

Re: the footbridge, much though I have an aversion for the excesses of the Safety Elves, I don't doubt the usefulness of handrails with slippy wet iron steps and one loaded down with luggage, Pity they had to be a garish yellow though.

All that's needed in that pic is a 121 in delivery grey/yellow livery to synchronise:)

Stunningly well composed photo scenes from superb layout.

Vaguely reminiscent of the Ratio and Hornby Dublo concrete foot bridges

https://www.irishtimes.com/news/environment/iarnród-éireann-claims-rise-in-accidents-linked-to-smartphones-1.3188877

The number of passengers involved in train accidents increased by almost a third last year, a trend which may be attributable to people being distracted by smartphones, Iarnród Éireann has said.

Would anyone have a dapol 20ft container like the EWL livery in the link below that they would be willing to sell or swap for a similar container

 

http://www.hattons.co.uk/26246/Dapol_B776a_Jan_2009_v2_Container_for_Spine_Wagon_Twin_pack_of_20_containers_1_x_Hanjin_dark_blue_1_x_E/StockDetail.aspx

C-Rail may have what you are looking for. http://www.c-rail-intermodal.co.uk

JB, having just re-read "Rails through the west" I have to thank and congratulate Barry and yourself for a truly superb production covering the pinnacle era of Irish railways. Absolutely Fabulous and a wonderful resource for future generations of modellers.

It's hard to single out any single image from the superb collection of photos, but the image of Gort station on page 29 with the busy goods sidings and classic array of goods wagons being shunted is probably my favourite image of Irish railways. A single 20ft Bell container hidden at the end of the train forewarns the end of this golden era was not far off at the time.

Particularly liked the Tuam and Claremorris coverage as well.

Just ordered a copy of "Rails through North Kerry" as a companion book

Noel

. . . not least some form of static grass applicator and a wide range of fibres and scatter materials. . . .

Hi David.

FYI, I got this GJ05 static grass applicator on eBay from China for only €15 (i.e. one tenth of cost of the Noch). So far it has worked well.

The seller was dreamlixy2009 http://www.ebay.co.uk/itm/GJ05-Mini-Flocking-Static-Grass-Applicator-SCENIC-MODELLING-NEW-/372043273554?epid=1187999198&hash=item569f81d552:g:Yo4AAOSwax5Yz1Kg

Btw, Clogher Valley is looking superb.

Noel

Very precise. Looking good.

How are the thin wires insulated? They look like copper covered by resin.

Pure class. It really gives a sense of Greystones

Hi Dave. Some vendors on Shapeways and elsewhere will take on CAD commissions. They have the CAD skills once you can provide scale drawings. The printing is the easy bit if designed properly to suit the mediums tolerances. Shapeways provide all the technical details on their web site. FUD is now as good as injection molded plastic but expensive. WSF body shells combined with FUD detail parts can now produce really fine models.

Great idea. Few suggestions to add to those already made.

• How to solder etched brass kits (e.g. SSM brake van)
  
• How to use a lining pen
  
• How to drive and shunt freight formations prototypically
  
• How to install DCC lights in diesel loco kits (e.g. SF, SSM resin kits)
  

The grass roof on the building would cause comments on a model layout...

Yes poorly applied static grass for the CMRC 1 gauge roof top layout I guess

Remarkable picture of Cobh on Twitter.

 

 

Just checked AIS, she's not there now, pic must be old. Yes the view of these large cruise ships from ashore can look pretty ugly, but thankfully you don't get that view from on board. These days Cobh seems able to cope with 280-320m long cruise ships, but the pax are transported away to their day excursions primarily by fleets of buses. I doubt a few two car 2600 rattle cans could cope with 3000 disembarking passengers. In the port of Civitavecchia near Rome cruise ship operators use special pullman style trains to get the pax quickly into the city.

While I was on AIS I noticed this beauty arrived in Kinsale today. She left Cork city earlier. Can you imagine how busy a rail line might be to the likes of Kinsale, Courtmacsherry and Baltimore during the summer and shoulder season had parts of the west Cork railway survived.

http://www.irishexaminer.com/ireland/luxury-superyacht-lady-christineberthed-in-cork-could-be-yours--for-53m-456720.html

One of the reasons residents of Dun Laoghaire are opposed to planning permission for large cruise ships in the harbour is the arrival of 15 story floating tower blocks obscuring views of the sea and harbour.

My horizons widened as I got a bit older to include the Model Shop in Rathfarnham Shopping Centre and occasional visits to George Hannan's shop in Malahide. The shop in the Rathfarnham Shopping Centre was managed by John Byrne who commissioned the first Irish Lima rtr models. Declan Lonegan a talented modeler and former Secretary of the MRSI assisted in the Rathfarnham shop on Saturday afternoons, was very helpful and some times brought along models assembled from whitemetal kits including a GEM LNWR Jumbo 2-4-0.

John, you are triggering all kinds of positive nostalgia memories. Does the nickname of 'Count Drac' ring any bell in relation to Rathfarnham shopping centre? I vaguely remember small in-store scenic layouts including N and Z gauge under glass counter tops, and 00 gauge running around the shop on an elevated shelf just below ceiling level. I remember him being a major Wrenn stockist, and my pilgrimages to the store in the 70s. Noel

Some fabulous photos Finbarr. I hadn't realised Kilkenny station had been 'rationalised' so much. It's been a long time since I was on the Waterford train.

Dungarvan + Tramore railways - 1980s video

Video:

I always felt that Bachmann would have been better repainting their Class 150 in Irish livery. I repainted a 150 at one stage from Dapol I think it was (not sure) definitely not Bachmann. Still not a 2700 or a 29000 but a bit closer than what they did in my opinion.

Sorry for the slow reply.

Hi Drew. D&M Models do a nice 2600 class if that would suffice for an Irish rail car. At least the doors are in the correct position unlike any of the Bachmann's. Noel

http://irishrailwaymodeller.com/showthread.php/112-2600-class-railcars

http://irishrailwaymodeller.com/forumdisplay.php/21-D-amp-M-Models

Hi All. Bray Train & Model Fair coming up this Sunday, take a break from your holiday and drop in....

Will do if the weather is bad. Haven't been for many months, looking forward to getting to one again sooner or later.

That's top secret for now, but all will be revealed in the not-too-distant future.

Understandably, and very happy to wait for the revelation of #4. If I was a betting man which I'm not, I'd put 20p each way on a goods wagon that shares either much of the chassis or bogie from one of the first three projects.

Looking forward to future releases.

Very nice pics. Pity the lower two didn't have mk4 sets rather than the bendy bus rail cars.

Did I say anything about brass?

Hi Kevin. No indeed you didn't, I was replying to Jonathan's post about kit availability, both kits are brass. An RTR J15 (101 class) would be nice but I doubt viable. Cheers. Noel