Jump to content
  • 0

Digitrax Controller

Rate this question


Question

Posted

Hi, I very recently got a new digitrax evo express set (DCS 210+ controller and D602 hand set, plus other bits in the box). I got locos running reasonable quickly, but Im trying to get the D602 to work wirelessly, not having any success. Is there a setting I need to look at? 

3 answers to this question

Recommended Posts

  • 0
Posted
8 hours ago, Alan564017 said:

Hi, I very recently got a new digitrax evo express set (DCS 210+ controller and D602 hand set, plus other bits in the box). I got locos running reasonable quickly, but Im trying to get the D602 to work wirelessly, not having any success. Is there a setting I need to look at? 

You need to add a UR90 infrared receiver to go wireless https://www.digitrax.com/products/universal-panel-ir-radio-receivers/ur90x/ with a D602. https://www.digitrax.com/products/throttles/dt602/

I have used Digitrax for over 25 years, still using original command station, later upgraded to Infrared and later RC with UR91 receivers and radio throttles.

  • 0
Posted

Mayner, thanks for that. After a bit of goolging and utubeing the penny dropped. There is little or no mention of IR control or the UR90 in the D602 manual, I have to say im finding the manual a very difficult read, its presentation is poor. With that said the hand set is great, navigating menus is reasonable easy (I have taken the Father Dougal approach of what happens when I press this button).

On a side note, I have three Murphy Models 071's. Previosly, Functions F1. F2 and F3, worked the lights. F2 is gone, according to the manual, its now the 'Momentary Operation'. The 'upper headlights' wont come on. I presume this means I have to map that function to another F key? the thoughts of it make me dizzy......

  • 0
Posted (edited)

I use the older Digitrax DT400 series throttles which require a 9V PP3 battery for wireless operation.

Being an American system Digitrax Function Keys are based on NMRA (National Model Railroader Association) defaults, apparently MM used European function settings.

Having used American sound decoders for many years, I struggled to get my head around MM decoder settings.

                   NMRA                                MM/European

F0            Headlight/on off               Headlight/on/off

F1             Bell on/off                         Sound on/off

F2            Horn (momentarily)   

F3            Mars Lights on/off   

F8           Sound on/off

I don't know if its feasible to change F2 from momentarily to latching operation.

Might be worth asking Digitrax help desk, who have in my experience have been helpful.                   

Edited by Mayner

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use