Keano30 Posted February 6, 2022 Share Posted February 6, 2022 Hello all, just wondering if anyone has had this problem. I have the class 121 mm and the horn is constantly blowing. I tried to reprogram / reset using cv 008 to get the horn off but it just doesn’t work. Any help would be much appreciated. Quote Link to comment Share on other sites More sharing options...
0 BosKonay Posted February 6, 2022 Share Posted February 6, 2022 Might be some ‘latching’ set on? Does anything happen when you switch on and off the horn function? Quote Link to comment Share on other sites More sharing options...
0 Keano30 Posted February 6, 2022 Author Share Posted February 6, 2022 (edited) Yes, it sounds two horns. latching set on, how would I switch that off? Edited February 6, 2022 by Keano30 Quote Link to comment Share on other sites More sharing options...
0 Fowler4f Posted February 6, 2022 Share Posted February 6, 2022 3 hours ago, Keano30 said: Yes, it sounds two horns. latching set on, how would I switch that off? On your controller. I’m only familiar with ECoS. Call up loco, click on Spanner icon, edit loco. You must click Programming Track bottom of screen. Click Properties on top of screen, F3/4 click momentary. Test. You can always disable Function. Click Green Tick to exit. Quote Link to comment Share on other sites More sharing options...
0 Adrian Posted February 6, 2022 Share Posted February 6, 2022 ^^ latching sounds about right - on Lenz it’s the same, edit the cv settings for the functions and turn on momentary Quote Link to comment Share on other sites More sharing options...
0 Keano30 Posted February 6, 2022 Author Share Posted February 6, 2022 Ok thanks guys I’ll give that a try tomorrow Quote Link to comment Share on other sites More sharing options...
0 Fowler4f Posted February 6, 2022 Share Posted February 6, 2022 8 minutes ago, Keano30 said: Ok thanks guys I’ll give that a try tomorrow As had been said before : 1st Rule of DCC Operation refer to Manual. 2nd Rule, refer to 1st Rule. I hate that saying ! Good luck Quote Link to comment Share on other sites More sharing options...
Question
Keano30
Hello all,
just wondering if anyone has had this problem. I have the class 121 mm and the horn is constantly blowing. I tried to reprogram / reset using cv 008 to get the horn off but it just doesn’t work. Any help would be much appreciated.
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.