-
Posts
902 -
Joined
-
Last visited
Content Type
Profiles
Forums
Resource Library
Events
Gallery
Blogs
Store
Community Map
Posts posted by Colin R
-
-
Thanks Patrick and Galteemore for the heads up, something else to add to the ebay wanted list
- 1
-
Hi Patrick
Sorry if you have mentioned this before but on page one you had a green painted signal box. I take it it is still there but you have now repainted it, my question is simply do you scrtach built it or was it from a kit
-
Hi Guys, I have just had deliver my three kits from John M In New Zealand:-
CIE Heating van 3101-3140
CIE Luggage Van 2700-61
CIE Post Office Van 2962-2971
Due to a possible move next year, I am going to put them into storage just in case I lose something from the boxes. but I do have one question did any of these run in the green livery (you can tell I haven't even open the box yet, so the answer may be inside)
Colin
-
Ebay can be a pain in the back**** someone paid £500 for an old Backwoods Donegal class5 kit over the weekend, in total they spend over £1,100 for four kits which according to the new owner of that range (which will be available again early part of next year) for just over half that amount.
I just wish they had done some home work on these kits before bidding, as now anyone who saw those prices is going to expect to get that if they put there own old backwoods kits on ebay next year.
I think they may well be dissappointed
- 1
- 1
-
1 hour ago, irishthump said:
I was'nt aware the 121 had a coreless motor. Are you sure that's the case?
To be honest I don't know as I don't have one to take apart to look at, but the locos I have recently obtained do have a far better motor in them than the good old Triang XO5 3 pole motor. Motor technology has come on leaps and bounds since I first started modelling railways.
Todays modelling is going down the DCC chip route and yet what I think puts a lot of older modeller offs from going to DCC is in fact the issue of having to change in some cases the old motor so it can work with the new DCC controllers.
I did have one loco which was converted to DCC but the motor kept running warm, it gave up in the end because it was not designed to accept a high current.
The other issue for some is that since DCC is here to stay, there has been no development with the older DC controllers, which to my way of thinking is wrong, I am sure I read somewhere that there is a cut off point which is possible to back date older locos to DCC.
From my experiance with 009 modelling, the older Eggarbahn stuff, does not like the 1980's feedback controllers where as the newer models coming out don't like using the older style controllers.
If I was starting out again then yes I would go DCC, but since I have more than enough 00n3 locos which will run on DC I am not about to start converting them over at my age, unless I win the euro lottery of course.
- 1
-
Hi Geeb check this link out I do have one so I find it works for me
https://modelrailwayengineer.com/best-model-railway-controller/
one thing to remember about model railways is that over time there have been a number of different types of motors fitted to model railway locomotives some coreless and others those much older will have had an iron core motor, please be aware that this can make all the difference to the proformance of your model railway.
On another group we are at the moment discussing the merits of a DIY controller from New Zealand, the only problem is that you need to be able to solder to make the kit up. more details a bit later about them.
Have a look at the following link as well
It should be noted that you get what you pay for when it comes to model railway controllers, as others have said look around on the internet and have a look.
Modern locos like the class121 should have a coreless motor so a gaugemaster should be suitable for your needs.
Finally for now and I don't know if you can get it where you live, but try buying a copy of model rail magazine, it is a good magazine for all sort of ideas.
Oh by the way welcome to the group and enjoy you new hobby many people do.
Colin
- 3
-
I think the thing is most railway organisations at some point pick a pig in a poke, the other thing is technology also has to play its part. like the days of the steam engine there is only so far a design can go and as 228Riverowneboy has said the A class would not have coped with todays traffic, also I don't see IE buying any new locos at this moment in time either, what with the eco summit having just taken place, there will now be design teams at all the locomotive manufactures working out what the industry and railway companies will require in the future.
I would not be surprised to hear of a IE bill to electrify the remaining parts of the rail system and the construction of at least one may be two new electrical power stations or the installation of bigger wind farms around Ireland to power the railways future needs.
- 1
- 1
-
In view of hybrid power plants may be we should dig up Mr Bulleid and get him to design and build a new version of the Turf Burner, but with better green credentials on the chassis of a 201
-
Hi Tony
Out of interest as you are not going to lay any cork, how does it sound when you use a loco? My understanding for using it is to stop any drumming/ sound effect from the baseboard.
Colin Rainsbury
-
22 hours ago, connollystn said:
@Westcorkrailway - I didn't go to college and look where it got me [unemployed]. Anyway, better off buying one great model than lots of mediocre ones.
The only reason they try to get people to go to college and or into university is to see just how much they can learn is the shortest period of time, I am personal disillusioned with the whole education system either side of the stream between our countries. Having worked in it for a few years I feel that anyone going now looses out on so much more. But most importantly, it is more about box ticking and not so much about the education in its own right.
If you have the talent for something practical on the whole you are not always encouraged to develop it, but to become someone who is capable of being an officer worker pushing bits of paper from one place to another.
Before you say I am off to where ever, just ask your self what sort of life you want afterwards, not every university student ends up with a high flying job.
Also don't forget this day and age it is more than likely you will end up with having had two or three different jobs by the time you get to my grumpy old age of 63.
If you like using your hands then think about a modern Apprenticeship it will make your life so much more rewarding, I have yet to find a course on self employment or how to set up your own company or stuff of this nature as this is far and few between.
If you have ambitions to become the next designer for Irish model rail it would be worth talking to them to find out what sort of qualities they would be looking for in someone to fill that role.
You don't have to be mad, but is does help you go a long way
Good luck in your educational endeavours, who knows you may one day end up being the President of Ireland, you can but dream
Colin Rainsbury
- 4
- 2
-
Just got all my 4 out of the boxes to take a look at them fantastic, now sadly however I am having to put them away so they don't get damaged while the work around the house get done, if everything works out how I hope it might, I shall be moving next year to somewhere that I can build a nice size model room, we will be starting the house hunting after Christmas as there is no rush right now.
- 5
-
Hi Robert don't put your self down one of the hardest bits in doing a production run is the prototyping to see how it is going to look in reality, most big manufactures now use 3D printing to make sure they get all the detail right before they make the moulds, for the production run. It used to be a very highly skill job to be a tool maker, My cousin before he retired used to have such a job.
Cad Cam productions methods are used a lot more than people realise. your 3D work can in theory be used by a mould maker to produce the finish moulds for the kit.
I do realise that to produce such a model may require someone to sit down and think in terms of the best way to go ahead in the production of the moulds, as a rough guess I would think you could be looking at something around 15 to 20 separate moulds before all the bits are glued together at the final end of the production line.
- 3
-
On 12/5/2021 at 9:57 AM, Warbonnet said:
Hi everyone,
There has been some silence on this project and I must admit that's down to IRM, and not Robert, so apologies to both Robert and all of you who are interested in this footbridge for that.
We were so impressed with Robert's design and attention to detail that we approached him with a view to mass produce his footbridge design rather than do a small run 3D print, which he has very graciously agreed to. So, this will be a new scenic accessory from IRM!
What's more, we are working on a modular concept for the bridge, allowing for various spans and orientations, giving you greater flexibility to fit in on your layout! The plan is that it will fully painted and with the bare minimum for assembly. We are currently working with our factory to get this production ready, and we will have a full update and launch including specs, prices, ordering information and more later this year, so please bare with us on that.
We will have more details in due course, but with the design being so good and now with a factory fit and finish, it promises to be a must have for any Irish layout!
Cheers!
Fran
Hi Fran and all
This sounds so good for Irish modelling one of the problems for model Irish railways is getting some one to do the design work, If i may be so bold but if we have any more talented modellers out there, then I suggest that Fran and co have a few quiet social meetings with these people to discuss how this can benefit everyone and not just us on this forum.
Who knows what might happen, it could be the start of a much larger Irish based resin building series like those from Bachmann, but under the IRM label? Knowing how popular anything Irish is in America I would be interested to know how many requests for these footbridges are from Americans and does selling Irish model railways to America feature in anyway for the future?
Good luck with this project, now that IRM are behind this at least I feel more than happy that I will be able purchase more than the two I was thinking about much earlier. ( I can feel the razor saw getting ready to make a few adjustments to one of them)
Colin R
- 1
- 1
-
So since I have had a very brief read of this tread one question which comes to mind is who is doing what in AEC Railcar kits in 4mm scale?
I know about the Silver Fox model, but is there anyone else doing a model of them and if so who?
I am not sure if Worsley works do the basic parts and if they are any good has anyone tried them yet?
-
ARRRRGH. If I had known this was going to happen I would have asked for one of these as well, however sadly the bank won't allow me to have one right now.
Like you say railway heritage is so very important to the railway modeller, I suspect these will fly off the shelfs as well. I will have to have another look in January to see if you have any left as that is the earliest that I could buy one.
That is of course you don't surprise us again with another green version before then as well.
- 1
- 1
-
6 hours ago, Galteemore said:
Colin, it’s just bad typesetting by the advertiser. All the Irish locos are prefaced by bold type, thus CIE. Unfortunately, BR classes are freely mixed in the list. This is simply a planned UK ‘superdeltic’ - class 51 - which never came to pass. The Irish kit was an E pure and simple.
.https://en.m.wikipedia.org/wiki/List_of_British_Rail_unbuilt_locomotive_classes
Thanks Galteemore, that make a lot more sense.
Colin Rainsbury
- 1
-
WELL THANK YOU THANK YOU THANK YOU, You have done it now, the first of four turned up today it has been waiting for me to pick it up from the post office drooled all over it when I got it home, until construction can start on the 21mm gauge layout, it stays in the box so I don't loose anything a bit of a jig and a bottle of the black stuff are now in order but which comes first I will leave it up to you to decided
- 6
- 1
-
May be it is me but the advert was for a super deltic loco, so is the E model that was produced supposed to be a copy of the prototype but with a deltic engine inside? I guess we shall never know, it sure does not help the modellers/historians when something like this red herring comes along.
The other thing is was the deltic E class going to be a bogie style locos for CIE? but the need for a shunter was more pressing so that came next?
Over on the UK they produced more prototype's than anyone else, I think some worked and went on to form the basis of more successful BR loco classes while others where just scrapped, the BR deltic had at least three variations that I know of the main fleet (Class 55) the Baby Deltic (Class 23) and a couple of prototypes the one in the NRM and DP2 (she has been scrapped after a major accident) but her parts went on to help build the class 50 locos.
So this brings me back to my question. Did English Electric produce a set of drawings for a co-co style locos for the CIE based on the experience of the BR class 55 I wonder?
see https://en.wikipedia.org/wiki/British_Rail_Class_50
Colin
-
Hi guys I am biting so what was this mysterious proposed Irish loco?
Colin
- 2
-
3 hours ago, Broithe said:
What is this legendary E class that is mentioned ^ ?
Maybe for another thread?
This does deserve its onw thread I think
- 1
-
Thanks for the up dates guys great stuff to see these flying off the shelves
Colin
- 1
- 1
-
Hi I know this might sound wrong but do you have an update as to which models you still have left from this batch? (not that I can afford anymore just now, but it is more out of curiosity).
Colin
-
11 hours ago, murphaph said:
Sad to think most of those builders plates probably ended up being melted down.
Hay Murphaph I wonder how much people would pay if you could make a replica works plate say in resin
- 1
- 1
-
Just had confirmation from the Post office in the UK that my order is on it way thanks guys
- 3
Old Metcalfe kits.
in Buildings and kits of buildings
Posted
Hi Jhb do you still have any of these kits left or have they all gone to a new home?
Colin