3D printing/modelling tutorials in June "Garden Whistle" newsletter (New Zealand)

[Mayner]

This months Garden Whistle contains three useful articles/tutorials on 3D modelling.

1. A Well Wagon/Depressed Centre car.

2. 3D printing without the hassle. 3D printing figures from photos using AI

3. British Rail Class 27 Part 4 Cab (design and printing process.

 

Models are all large scale!

I'll forward a pdf. copy of the Garden Whistle if anyone is interested.

[commerlad]

3 hours ago, Mayner said:

This months Garden Whistle contains three useful articles/tutorials on 3D modelling.

1. A Well Wagon/Depressed Centre car.

2. 3D printing without the hassle. 3D printing figures from photos using AI

3. British Rail Class 27 Part 4 Cab (design and printing process.

 

Models are all large scale!

I'll forward a pdf. copy of the Garden Whistle if anyone is interested.

I would be interested please, Just got a 2nd hand Tevo Tornado (Apparently a Creality CR10 clone) to start with.

Also have a Resin printer gifted a few months back but that is still sat in it's as yet untouched and factory sealed box.

Start a course on 3D printing at end of month.

[commerlad]

The Bogie well looks good and the tip about the joining method. (Do not know if our Chemists will sell the product though)

The article for the figures is interesting, as that looks doable being mainly Software lead, once you are familiar with the Printer.

The Class 27 Cab, Well it's a bit advanced in the design stage for a newbie.

 

Edited June 3 by commerlad

[Flying Snail]

HI @Mayner. I'm interested too. Can you forward me the pdf also please?

[Maitland]

Still climbing the learning curve for Solid Edge. My Chinese van prints still haven't arrived - they say they got lost in the system, so it doesn't just happen here. In the meantime I thought I'd have a go at one of my favourite locos- the SLNCR "Leitrim" class small tanks. This is the all - in - one assembly, actually it's 3 parts - boiler, tanks & cab, and frames and running board. I thought I'd do that last bit together to give it a bit of depth in the hope that it will actually print. So work in progress:

 

 

SLNCR Small Tank.stl

[Maitland]

Just realised I put this in a rather stupid place... could anyone move it somewhere better?