Help

[kevrail]

Hi Guys. This yoke has stopped running on me. Just has gone dead on DCC. Checked on Dc and still no power seems to be going to it. I reluctantly removed the body but am afraid to do anything else as I am not sure what to do to get it running. Any Ideas???

[WRENNEIRE]

Take off the DCC chip and replace it with the blanking plate, if it runs on DC your chip is fried

[kevrail]

Thanks Wrenneire will try that

[DiveController]

Did that work?

Occasionally you'll have a main wire come loose due to bad solder. Happened to me with a lighting wire only on a 141. You'll have lights if it a wire to the motor only.

Which chip, wonder why it failed if so?