Moogie-69 Posted Monday at 23:07 Posted Monday at 23:07 GNRi mk2 Horse box. Got a good start made, still lots to do. 16
Moogie-69 Posted Tuesday at 22:46 Author Posted Tuesday at 22:46 Thats it mostly done, now to start printing and see if my dimensions are ok. Any information on what the inside looked like ? Plans didn't show much detail . 4
jhb171achill Posted yesterday at 00:51 Posted yesterday at 00:51 The groom's compartment had a basic wooden bench along the end (the groom wouldn't have had the hay thing above him!). That was the norm, but noting the position of the groom's door here, it looks like the bench seat might have been with his back to the horse, i.e. his back to the internal partition, which might seem odd. I suspect the internal partitions were full height, unless the diagram indicates otherwise, as this was the norm. Possibly a luggage rack or shelf above his seat? Not sure. The little compartment at the other end might have had hooks or something inside for harnesses / tack stuff, not sure. 1
Mol_PMB Posted yesterday at 06:43 Posted yesterday at 06:43 There are some diagrams showing horsebox interior layouts in this thread. Not GN ones, but a variety of other Irish types: https://irishrailwaymodeller.com/topic/19747-cie-horseboxes Also there are a couple of photos with the doors open showing something of the interior. Inside, I would expect the groom to have a bit more knee-room but the compartment at the other end might be a bit smaller. 1
Moogie-69 Posted 23 hours ago Author Posted 23 hours ago I noticed in one of the photos in that link there seems to be a shelf or something in the box, i wonder if that is what the interior drawing is showing in the GNRi one ? 2
leslie10646 Posted 21 hours ago Posted 21 hours ago (edited) To hold a hay basket for the horse? @Moogie-69, I'm pretty sure that the curved cornered object in the groom's compartment is actually his seat - facing the horses. It lines up with a similar seat in the GSR horseboxes. The light line between the two doors is a puzzle - too narrow for a seat. I'm scratching my head to think where you'd get evidence of the interiors! Of course, you simply ignore the interior as no-one can see it in 4mm scale? UTA livery, apparently - Copyright IRRS, a Lance King photo. Great work altogether - thanks! Leslie Edited 21 hours ago by leslie10646 1 1 1
Moogie-69 Posted 21 hours ago Author Posted 21 hours ago First bit of printing done, very happy with how the detailed bits turned out. Forgot to take two bits of support off the brake linkages. 6
Moogie-69 Posted 17 minutes ago Author Posted 17 minutes ago Not too shabby, very pleased with how it turned out. 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now