have learned a lot from the forums, however this is my first post to any of the forums. I am currently testing ABC with a Lenz BM1. I have a Jinty fitted with a ZIMO MX648 decoder, CV 27 with bit 0 set to 1 and it works fine, slows down and stops and I can reverse it away. However, my 071 fitted with the Loksound 4.0 and again CV 27 bit 0 set to 1 works fine, slows down and stops but, for some reason the 071 wont reverse when I try to get it to reverse. If I reset CV27 to 24, default setting, reverse mode is re-activated. Your help would be appreciated.
.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Question
Gearóid
Hi Folks,
have learned a lot from the forums, however this is my first post to any of the forums. I am currently testing ABC with a Lenz BM1. I have a Jinty fitted with a ZIMO MX648 decoder, CV 27 with bit 0 set to 1 and it works fine, slows down and stops and I can reverse it away. However, my 071 fitted with the Loksound 4.0 and again CV 27 bit 0 set to 1 works fine, slows down and stops but, for some reason the 071 wont reverse when I try to get it to reverse. If I reset CV27 to 24, default setting, reverse mode is re-activated. Your help would be appreciated.
thanks
Gearóid
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.