.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
BosKonay
-
Posts
8,845 -
Joined
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Blogs
Store
Community Map
Everything posted by BosKonay
-
-
https://www.youtube.com/watch?v=Aq7bcY9tuao
-
Plenty of US stock in this shop
BosKonay replied to Flying Scotsman 4472's topic in US / Canadian Railway Modelling
a bit of both -
Plenty of US stock in this shop
BosKonay replied to Flying Scotsman 4472's topic in US / Canadian Railway Modelling
-
Has anyone completed Maedbh yet?
-
RPSI 461 in her Original DSER livery
-
Meave, Merlin, Dunluce and a great big GM for good measure :)
-
And, built from a Triang / Honby 2P, No. 74, Dunluce Castle in NCC red
-
Video of her moving to Cultra
-
Here is my version, a modified Hornby compound with tender drive:
-
RPSI Locomotive no. 85 - Merlin http://www.steamtrainsireland.com/locomotives/loco85.htm
-
[video=youtube;Uh63-FRIBXI]
-
-
Wow, wow, and another wow! The backscene is beautifully blended, and that station building! What can I say! The man's a genius!! Benches, station lights, a fence bins, phone boxes and some people and you'll have a stunning looking set up
-
Peco small and hornby 'small' / standard points are identical basically, both peco and hornby 'set track' points and geometries are identical and interchangeable.
-
Plenty of US stock in this shop
BosKonay replied to Flying Scotsman 4472's topic in US / Canadian Railway Modelling
Sooooo cheap!!! -
Stunning! I got a batch of the 20' (and some tanktainers) and they are absolutely stunningly perfect
-
Photographic Website Updates
BosKonay replied to thewanderer's topic in Photos & Videos of the Prototype
Use youtube - it's very simple and there are apps for most smart phones to do it directly, and you can embed the video directly. -
done
-
Awful photo, amazing flats! Don't want to spoil them by plonking containers on top
-
-
(The theory with the printed strip, is that is under the moving tie bar, so you ballast all the white bits safely)
-
They are small card 'inserts' that come with the Cobalt Motors. After you drill the hole for the motor armature to poke through, you are left with a big, 6mm hole - not good for ballasting! You slip the card insert under the point, and you get a neat little slot for the motor arm, and can then ballast safely without dropping ballast into the motor or under the board. They'll need a good whack of an airbrush too - you'd think they could have printed them with ballast (or even printed them grey )
-
Last but not least, the first little batch of hardstanding.....
-
Oh, and here are Dave (modelbaseboards) stunners on the right hand side, ready for the right hand loop and what will be a Whitehead inspired preservation depot:
