Jump to content

David's 0 Gauge stuff

Rate this topic


Recommended Posts

Posted

Masterclass David and a persuasive incentive, if one were needed, for some of us to consider moving up to 7mm scale!

Fully agree with you about Gordon's book. Full of brilliant ideas though I've struggled on occasion to implement some in the smaller scale. My efforts have ended up looking heavy-handed or just overscale.

Posted

Yes, possibly a bit "horses for courses" Alan and the larger scale does enable you to do some things better, especially in terms of finer detail. As you say though, so many great ideas that make you think about how they could be adapted to your own needs. 

 Remember one time we stayed with Gordon and Maggie, there was a military modelling magazine on the coffee table. When I asked if this was another interest, he said not, but had learned the techniques had much to offer railway modelling - something I think we have on this forum too.

  • Like 1
Posted

 One of the nice things about creating a new layout is that when you've had enough of one task, there's always another to change to. So, this week, have been trying to complete the hidden part of the layout, namely the fiddle yard.

 Like Swillybegs, it's cassettes again, though being standard gauge, I'm using 25mm aluminium angle and 9mm ply, instead of 20/6. I devised the system myself with the screws fixing the angle to the ply projecting through to rest on brass plates which carry the power.

 There are two 14" cassettes and four 28" ones. The second picture show the underside, with the fixing screws just visible, while the third picture shows the two brass plates.

DSCN7481.thumb.JPG.fe24d849832db1f897ff773c86d58ceb.JPG

DSCN7482.thumb.JPG.94207b59bdfeb44ed9966b974b895a5a.JPG

DSCN7483.thumb.JPG.fbe64f454bc1bb44e9b08382e0014a54.JPG

 Alignment with the track is done via a strip of wood, screwed into the fiddle yard deck. if there is any misalignment, as per the second picture, then shims of plasticard keep things right.

DSCN74852.thumb.JPG.8c88fc2d88d72d02aae6b43a39962fa0.JPG

DSCN7486.thumb.JPG.db534d6da0b6f45d0f0eac6d476e25d2.JPG

 The two short cassettes are for the railcar, plus loco [J69] and horse box. The other four cassettes are currently likely to be:

  • Two loaded [or empty] coal wagons plus brake
  • Two milk tanks, or one tank plus one refrigerated van
  • One bolster or pipe wagon, plus brake
  • Three vans

 DSCN7478.thumb.JPG.1c0a728da915631c8b45765b52751f68.JPG

DSCN7480.thumb.JPG.e16044490181528e25e601b0cbf54392.JPG

 As can be seen, the other road in the fiddle yard is just a length of plain track, as the off scene private sidings, where wagons will be crane shunted by hand. Power is switched between this and a cassette by a double pole, double throw switch.

DSCN7484.thumb.JPG.60f74a3450d79eb8ce7521092e7ad267.JPG

 

 

 

 

 

DSCN7485.JPG

  • Like 5
  • 3 weeks later...
Posted

DSCN7535.thumb.JPG.41e0aea82e6d9fd77d9fa8f4e7875041.JPG

 Well, here's something you don't expect to find!

I've been going through my locos, giving them a service, prior to eventually fitting AJ couplings. A few locos were wired the wrong way round. Don't ask me why, other than a case of 'if it works, don't fix it', while some had DCC chips that I decided to remove. 

 The J69 had been a bit hesitant, which I'd put down to dirty wheels. Turns out it was a bit more than that: the left side coupling rods were missing! Absolutely no idea where they are either. Not in the box, not on the layout either. The only thing I can think is that they somehow came off when the loco was working on the Chatham Club's 0 gauge continuous run at last years show and got lost when we were packing up.

DSCN7536.thumb.JPG.6238816dbd885ad01c9d90e81fab59ba.JPG 

DSCN7537.thumb.JPG.ec106fa09c2c6e47b95da3e17d2951c0.JPG

DSCN7538.thumb.JPG.5c879fd3ce59cb4720f80a8beaf419f3.JPG

 The other pictures show my 08 shunter - a Bachmann Brassworks model - which needed its wiring reversed, though that ain't going to happen, due to the curious way these models were constructed. Around a hundred or so tiny cross headed screws hold things together, four to attach the chassis to the body, but there are also two each of the axle box retaining bars [so that's another twelve], plus a myriad of other places. What's really stymied me is that the brake rodding also stops you getting the body off the chassis, so have left well enough alone.

 I'll just have to remember the 08 runs the other way to everything else. And no, I'm not going to reverse all the other stock, just to fit in with the 08. Majority rules...

 Now need to put in an order to Premier Components for a new set of rods for the J69. It was built from a Connoisseur kit and strongly suspect that they were part of it when it was built at least 20 years ago.

 

  • Like 2
  • WOW! 4
Posted

Found the lost coupling rods, hiding on the top shelf of my display case, well above my eye line. No sign of the crank pins nuts and washers of course, but I have some spares. The fact that all three sets needed to come undone for the rods to fall off makes you wonder - though in restoring things to order, noticed that a wheel was loose too!

  • Like 1
Posted
50 minutes ago, Colonel said:

Found the lost coupling rods, hiding on the top shelf of my display case, well above my eye line. No sign of the crank pins nuts and washers of course, but I have some spares. The fact that all three sets needed to come undone for the rods to fall off makes you wonder - though in restoring things to order, noticed that a wheel was loose too!

Sounds to me like your carpet monsters are becoming proactive. They've learnt how to use tools!😄

  • WOW! 1
  • Funny 4
Posted
32 minutes ago, Tullygrainey said:

Sounds to me like your carpet monsters are becoming proactive. They've learnt how to use tools!😄

I hope mine never evolve to that level!

  • Agree 1
Posted
8 minutes ago, Colonel said:

I think its a case of Mr Sod's Law being upgraded to something much coarser...

The only antidote to that is sentences contained very rude words, uttered at high pitch.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use