Accurascale IRM October 2026 Update

[Patrick Davey]

2 hours ago, jhb171achill said:

It’s not that heavy. It only took nine men to lift it into that display cabinet…..

Ah.

[jhb171achill]

9 minutes ago, Patrick Davey said:

Ah.

Thats what they said……

[irishthump]

14 hours ago, James said:

Has anybody that’s ordered a previous/ recent model such as the Hunslet able to help? Do the Accurascale DCC sound models come with a blanking chip/are they easy to convert back to DC as I’m looking to order sound models as I’m in the process of wiring my layout from DC to DCC but I’m not there yet. 
Thanks in advance!

If I remember correctly the sound equipped locos will run on DC out of the box.

[James]

2 hours ago, irishthump said:

If I remember correctly the sound equipped locos will run on DC out of the box.

Even better! Thank you!

[irishthump]

36 minutes ago, James said:

Even better! Thank you!

If it is not configured to run on DC it's a simple job to do but you will need access to a  DCC controller to set it up.

[James]

22 minutes ago, irishthump said:

If it is not configured to run on DC it's a simple job to do but you will need access to a  DCC controller to set it up.

Ah ok, that I don’t have just yet. Is it a simple case of just taking the chip out and putting the blanking chip in to convert it until I get a controller?

[irishthump]

13 minutes ago, James said:

Ah ok, that I don’t have just yet. Is it a simple case of just taking the chip out and putting the blanking chip in to convert it until I get a controller?

Yes that will work. But it should work on DC out of the box. 

You'll have to crank the power up higher than usual under the sound starts, then the loco will move as normal. The sound will shut of if you turn the power off completely at the controller.