meathdane

No.495 was the Allman distillery shunter, being a regauged 0-4-0 peckett correct? Apologies about being hung up on the Peckett idea, I've seen the model running and I must admit I was quite taken by it, but at this stage, I'm just looking for an excuse to add a Peckett to the collection! It might get the wheel guard treatment if that's the case. In my opinion "Guinness" looked smashing with the guards in place, really screams industrial loco to me! So for the Peckett it would be along the lines of the factory bought the locomotive from Peckett, and following a non fatal incident with a inexperienced yard hand, decided to fit guards to the loco to prevent injuries while non railway trained workers worked in the vicinity of it. Does that sound plausible enough or am I going beyond the realms of plausibility here and going too far astray? But provided the 88DS is as good a runner as the 48DS (hopefully being just an elongated chassis and body), Id probably go for both! And No.90 after seeing how well WestCork's model turned out! The whole reason for me going towards an Irish outline over british was so I wouldn't buy so many locomotives, because in my unlearned ignorance, I didn't think Ireland had so many unique and interesting locomotives, this there wouldn't be as many models! But I'm happy (in a soon to be broke kinda way) that I was wrong! I actually have a Jinty that died a death that I've weathered and removed the motor from to use as a Y class destined for the scrapheap as a siding filler, trying to capture the idea of the death of steam here in Ireland!

They look quite good actually! What are the quality and fit of the prints like onto the Terrier chassis?

I had forgotten about No.90! Thanks for reminding me! Just a new coat of paint, a pair of Kadees and off I go? sounds good to me, they seem to be decent little performers all things considered! plus Hornby have managed to squeeze in space for a DCC decoder which is a massive bonus!

With the Rustons, the wagon does have additional pickups, though I'm planning to use electrofrog points, so hopefully that will nullify the need for the wagon for running I see what you mean about the difference between the Peckett and Hudswell, i wasn't sure if Peckett was a catch-all term for that style of locomotive (like Mogul), but seeing the two side by side, i can actually see quite a number of differences, the dome for example is a lot flatter on the Hudswell, and the bufferbeams are a different shape to the Peckett, which sits higher on the running plate. That seems to be quite a bit of work to get it closer to the Hudswell, i assume there's no rtr Hudswells in the pipeline, so Ruston it may be, unless theres a 3d body for the Peckett chassis either?

HI all, Now that I've ordered some provincial wagon bullied opens, my thoughts have wandered to shunting engines, I'm re-imagining my shelf layout to be more of an industrial shunting layout, so I will be in need of a shunting loco. It will be a generic factory setting, not based on anywhere or anything in particular, just for myself to have some fun shunting, but I would like an Irish twist to it. Any loco I choose may get a fictitious private livery, so it does give me a bit of scope for non-prototypical and "what if" liveries. What I do want however, is to take a bit of precedent from reality. Use existing examples as though the company ordered their own shunter/purchased one from another company/CIE I've been considering a few options, in both steam and Diesel, as this will be of no fixed era The Ruston/Sentinel locos, I've caught glance in the forums that some companies purchased similar locomotives here, How close/how much chopping would one require to resemble an Irish variant (re-gauging to 21mm aside, I'll be sticking with standard 00) No.3BG "Guinness" at Whitehead has caught my eye. How close are the Hornby 0-4-0 Pecketts to "Guinness"? To my untrained eye they look very close, however I could be well off the mark! I wouldn't mind having a go at the wheel guards "Guinness" originally wore at the brewery as a bit of a modelling challenge for myself. The most obvious one for steam is the NCC 'Y' Class, which is simply a Fowler Jinty repaint. For the diesel brigade, it would likely be the Silverfox G class, and that would likely get the BnT livery. The 'G' class is obviously the most accurate being based on an actual Irish prototype, However i would like some opinions on the feasibility of a Peckett conversion, considering I would be planning to hide the running gear with the guards, would there be much involved? I would like to do this with a relative degree of accuracy, But due to the fictitious nature of the industry and the variability of industrial locos, I do have a little room to play. Many thanks and Kind Regards, Dane

Hi Noel, Great advice as always! I'm currently waiting for Leslie to invoice me for 2 kits, they do seem to be the preferred kit of most modellers here, they seem pretty straightforward to build, albeit with a few fiddly parts involved as you have said, but do seem to have the best finish overall, this is my first attempt at anything even approaching what some would call prototypical, and wagon building in general. If all goes well, it will be the beginning of me transitioning from resprayed generic UK stock to proper Irish models, so hopefully all goes to plan!

Thanks all for the help and guidance, Ordering 2 kits from Leslie, prepare to watch me bungle a perfectly good kit in the near future

I don't know if I should say it's a pleasure to meet you or not, my wallet has a funny tingling about it because I've seen what can be done with your kits. Guess the only thing to do is try them myself! Wish me luck! Sending you an email now Leslie!

Much Appreciated Robert! Ill get in contact with him later this evening/tomorrow Perfect, thanks a million lads!

Thanks West! Can you point me to a contact point for Provincial? I've tried googling provincial wagons, and a website comes up, however its a generic wordpress-esque site with no products listed http://provincialwagons.com/welcome-screen I've bought stuff off him, Millipede is the user, lovely gentleman, however, Everything he makes has the large 'D' TLC, which I'm trying to avoid at all costs! but hes in the back of my mind if all else fails!

Hi all, Would anyone be able to point me towards someone/where selling either RTR, Printed bodies or even possibly a kit (dependant of quality and ease of construction) of bullied corrugated open wagons. Ideally with NEM pockets to fit Kadee couplers, as I'm in the beginning phases of transitioning to kadees so it would be a help, but will consider anything, looking for 2 or 3 price dependant! Please and Thank you! Kind Regards, Dane

Either way I'll find a use for them! I've learned from the 071/141/181s, buy Irish stock while its available, otherwise you could be waiting a long time, either way, I'll find a use for them/store them until i can find appropriate stock for them

Fair enough! time to start planing the justifications for a couple of 201s then! Thanks for the response!

Question on this topic actually, did the Mk3s ever see push-pull service with the A class? I know there was an overlap between the coaches and the locomotives, however I'm not sure to what extent. Either way I'll be getting a rake, just depends if I need to start planning the justification of another loco (or two)

Many thanks lads! High praise coming from yourselves!

Another quick update. Patsy is more or less complete, I've applied the varnish, which has dulled the brown weathering, so I'll need to have a look at that, as well as painting the bufferbeams red, still more work to be done! Seen here alongside my retired Y class locomotive

Thanks a million! Really appreciate it

I've been continuing on with my conversions, and my largest one to date is ticking along, while not impressive to some of the master craftspeople here, it's my first foray into locomotive conversions. This is the progress on my N class conversion. Number 211 "Patsy" . Named for my late grandfather Patsy, and numbered for his birthday (21/1). Custom brass nameplates and running number have been attached to show this. More work definitely required, including but not limited to, coal and crew, lamps, weathering the other side, apply decals and painting the buffer beams, but I'm happy with. Hopefully some day in the future I might sent him away to get a smoke generator, directional lighting and DCC to bring him more up to date. The progress so far with the exception of a snapped cab side, but it's been somewhat repaired and will remain under the story of the engine being repaired after an incident with the repair scar there to prove it. After I'm finished Patsy, I'll be moving onto 255 "Daisy" so they can be reunited again in another form. Thanks all! Dane

Quick update. Found a pine shelf in Woodies that was nearly perfect in dimensions a bit over 5ft in length and a hair under 1ft in width, little bit of trimming and that's my baseboard ready! I've decided on code 75, going with 2 long radius lefts and a long radius Y, all electrofrog. The track, the joiners and insulated fishplates can all be got easy enough, however nowhere seems to have this selection of points in stock, so if anyone could point me in the direction of some in stock, I'd be forever grateful! Thanks all!

Definitely worth looking into, I'm by no means a prototypical modeller, I go by the saying, "if it looks good, good enough". That being said, I do want to make this somewhat plausible looking, so I may just go with the code 75 and leave the code 100 to the main layout. It does open up more options for pointwork too!

Just have some spare and that's what I'm geared up for. I could go to 75, most definitely, it'll open up the option for a electrofrog double slip, I've been toying with that idea, but it's also a case of if I buy an older loco with deep flanges (highly unlikely but you never know) it won't cause problems with movements. I'm not completely set, I'll lay it out with code 100, and consider my options at that point Yes JHB, sorry! That's the plan, I did this during my lunch at work and was pressed for time to finish it up and get back to earning money to do this! I must have gotten mixed up and forgot to add the tag for the converted goods shed. Sorry about the confusion! But that is essentially the plan, there's a few other bits not listed, including, light posts, ground signals, fencing possibly an engine hoist, old rails and sleepers, disconnected point work and the imprint of removed trackwork. This is the rough outline to keep me "on track" so to speak! I have great plans to detail this as highly as possible, just a matter of seeing if my skills line up with my imagination!

Hi everyone, Im Planning to start a small 5ftx1ft layout to display my engines/stow them in the house during the winter due to a lack of insulation where the Main layout is being constructed (for the moment). It is representing a near derelict station with most of the tracwork removed with only the bare bones trackwork remaining, and a now defunct goods shed converted to preserve/store engines, I want to keep it simple, so it can be done quick enough and take minimal maintenance, and use for a test bed for scenic techniques. It will all be done using Code 100 track and electrofrog points. The layout is as yet unnamed, but below is a rough sketch of my plans. Anyone have any additions to the layout? I may add an engine hoist behind the shed as of yet. I need to get the track and lay it out to see how it sizes up. Keep in mind, its not designed for freight/passenger operations, so the lack of a runaround is of no concern to me, it is in essence there to display my loco collection. Blue and red dots represent power feeders, yellow is Point motors. I haven't committed to a double slip, i may use two points in its place, hence the lack of droppers at that point. I also Swap the water tower and inspection pit positions Thanks all! Kind Regards, Dane

Hi all, Bit of a hens teeth situation, but has anyone got one of the Bachmann two car sets they'd be willing to sell? This is not for myself, but I was contacted by the carer for a young man who is very ill at the moment and has received some bad news, and all he wants is "the green train", and no other one will do. There are funds available to purchase this set if one can be got, not even the full set, or box but even just the two car set. Kindest Regards, Dane

I'll share mine, not as long or exciting, but one which inspired me to ask for a train set for Christmas that year! My grandfather worked the railway from the 70s to the late 90s, he helped to pull up the line from Dublin-Navan in '06/'09 (greatest mistake he would often mumble, even into his twilight years with dementia. Through his connections still within the network, he got us on a working to Platin Cement Drogheda in the cab of an engine, now, young me was unable to take in all the details, but i remember gawking up at this giant, awe inspiring orange machine, caked in the oil and grease only an Irish locomotive can apparently accrue, and i distinctly remember believing this engine was black. Pointing the black engine out to my grandfather got a chuckle, and he corrected me, "This one, is in fact Orange, the days of black engines are long done and dusted". I remember being lifted into the cab of this engine, and being amazed at the complexity of the engine, and how one man could figure it all out! but i was shown the most important piece of equipment. without which, this train could not function, and the piece that i would be in charge of, The horn! and let me tell you, i mastered that horn! that engine was probably sent to Inichore to get the horn refurbished after i was done! But it was an amazing experience, one I'm proud to have had. And i remember walking through the yard with no hi-vis on any of us, Im not sure that would fly anymore, so i feel very lucky and privileged to have had the experience i had! My poor mother spend an age chasing us in the car! Another one is the sleeper incident. and lets just say, most of my grandfathers sheds are built from IE sleeper and rail from Irish Rail, triggering an investigation as to why there was a tow truck laden down with sleepers leaving a yard. (not into my grandfather, but into the purported seller of said sleepers mind you). We're still getting great use out of those sleepers!

I'm not sure what time period you're modelling, but as a suggestion, you could model a disused turntable, with just the pit remaining. again, I'm not sure if you want it to be functional with the talk of motors i would assume you would, but you could model it as such and then in the future you could come back to the pit and 'Finish' it so you could build the rest of the layout but still have the provisions for your turntable?