Jump to content

What got the GNRi blue ?

Rate this topic


Recommended Posts

Posted
13 minutes ago, Moogie-69 said:

Am i right in saying that the blue livery went on the class S, S2, V, VS and U. Did the UGs ever get the blue livery ?

No, they were mainly goods engines. The majority of GNR locos were black (green before the mid-1910s).

  • Agree 1
Posted
3 minutes ago, jhb171achill said:

No, they were mainly goods engines. The majority of GNR locos were black (green before the mid-1910s).

There goes that idea. 🙄

  • Funny 1
Posted
9 minutes ago, leslie10646 said:

Not just black, but unlined black which makes painting the goods engines easy!

You've just got to letter them!

image001.thumb.jpg.8dd8b200625a7eb89ef0f74b1e2970e3.jpg

That sounds like my level of painting. 🤪

  • Like 1
  • Funny 1
Posted (edited)
9 hours ago, Moogie-69 said:

BTW, how do you do the lines on these trains, paint or water slide decals ?

Various ways. Can use transfers (LNER prob ok). Or, learn to use a bow pen and do it that way - allows more flex than transfers do.

 

Edited by Galteemore
  • Agree 1
  • Informative 1
Posted

Yes, the lettering is another matter. When my locos were being lettered a couple of guy did sets - alas, no longer.

Steve at Railtec does

Irish GNR(I) AEC & BUT railcars and trailers

which give you a small Coat of Arms and "GNR" but too small for a locomotive. 

He might be persuaded to do a larger GNR, crest and numbers, for a price. It shouldn't require too much artwork.

 

 

 

  • Like 1
  • Agree 1
Posted
15 hours ago, Moogie-69 said:

BTW, how do you do the lines on these trains, paint or water slide decals ?

I've used waterslide transfers for all my BCDR locos. With patience and enough Decalfix or similar to soften them, you can bend straight bits into fairly tight curves.

IMG_1760.thumb.jpeg.5cb17e6f8f844928b75bf8289a50a0ec.jpeg

 

  • Like 2
  • Agree 1
  • WOW! 1
Posted
9 minutes ago, Tullygrainey said:

I've used waterslide transfers for all my BCDR locos. With patience and enough Decalfix or similar to soften them, you can bend straight bits into fairly tight curves.

IMG_1760.thumb.jpeg.5cb17e6f8f844928b75bf8289a50a0ec.jpeg

 

Where did you get them from ?

Posted
55 minutes ago, Tullygrainey said:

Fox Transfers. I used 0.35mm lines and corners in red and white. They're a bit over-scale but that was the finest they did at the time. However, I see they now do 0.15mm lines and corners which would be much better.

https://www.fox-transfers.co.uk

 

Thank you,  I'll have a look.

Posted

I often get custom transfers printed by Precision Decals and they can potentially do a whole panel in go. 
You would need to prepare the artwork which has a bit of a learning curve, but given your CAD skills I’m sure you would pick it up. 
As an example the lettering on this wagon is all one big transfer to my design, nestled down over the rivets. This could be done for a tender side or splasher for example. Multicolour no problem. 
IMG_5287.thumb.jpg.a2b2f97e54c4b89a08f05b466c9b3354.jpg
Cost is of the order of £10 to £20 for a whole loco, one off sheet. 

  • Like 2
  • Agree 1
Posted

PRECISION DECALS - CUSTOM DECAL PRINTING

Note that the prices quoted are full A4 sheet - and most projects will only be a fraction of this and proportionally cheaper.

Because you're only paying for exactly the transfers you want, rather than a generic sheet you'll only use a fraction of, this works out no more expensive that buying off the shelf. But you do have to do the design work, and I appreciate that not everyone has the software or the aptitude / time to do that.

There is also a limited range of colours, there are dozens of colours available but it's not an infinite range. Sometimes it takes some experimentation with overlays of different inks to get the right result. Eau-de-nil was a particular challenge for my Irish models, but I have the right formula now. GNR black and white lining is easy in comparison! Metallic inks are also available.

I can advise if anyone else wants to go down this route. I must have done 20-30 custom sheets in a very wide range of colours. 

John also turns these round quickly - it can be just 2 days between submitting the artwork and getting the custom decals.

  • Thanks 1
  • Informative 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use