Jump to content

Darius43

Members
 View Profile  See their activity

  • Posts

    1,547

  • Joined

  • Last visited

  • Days Won

    128

 Content Type 

Everything posted by Darius43

  1. Darius43
    Cheers Darius
  2. Darius43
    Station buildings completed. Cheers Darius
  3. Darius43
    Roofing tomorrow. Cheers Darius
  4. Darius43
    Final station building under construction. Cheers Darius
  5. Darius43
    Further progress. Just the last couple of station buildings to make now. Cheers Darius
  6. Darius43
    Next building started. Also added some posters. Cheers Darius
  7. Darius43
    Cheers Darius
  8. Darius43
    Almost everything on this layout is or will be built from kits or scratch - great fun Cheers Darius
  9. Darius43
    Yes - I have some MSE somersault signal kits to build. Cheers Darius
  10. Darius43
    Delightful 1960’s Station Bar entrance added… And a cable marker sign. Cheers Darius
  11. Darius43
    Boat Train to Larne Cheers Darius
  12. Darius43
    Whitehead - UTA best kept station Cheers Darius
  13. Darius43
    Whitehead - UTA best kept station Cheers Darius
  14. Darius43
    Roof on. Cheers Darius
  15. Darius43
    Is this weird? Did it just get weird here?
  16. Darius43
    I don’t clamp it down and occasionally it does move - especially on smooth and shiny surfaces like acetate sheet. Cheers Darius
  17. Darius43
    To be fair, my use of a steel rule makes it a lot easier… Cheers Darius
  18. Darius43
    Windows made from acetate sheet (old report covers) with masking tape applied. The window bars are cut away with a new blade. The masked window is sprayed with grey etching primer and then white primer. Once dry, the masks are removed. Cheers Darius
  19. Darius43
    Hi Leslie. I’m using neat pva. As the model station buildings are following the curve of the platform, there are very few right angles… Cheers Darius
  20. Darius43
    Adjacent buildings constructed. Cheers Darius
  21. Darius43
    I drew the pattern big scaleee in MS Paint and then shrunk it and printed strips of them on clear decal paper. These strips were applied to the painted valences. Cheers Darius
  22. Darius43
    Columns painted and fitted. Cheers Darius
  23. Darius43
    Yeah, like I’ve never seen that one before
  24. Darius43
    I was a civil/structural engineer for 39 years- just retiring now Cheers Darius
  25. Darius43
    Canopy building painted. Columns made using 2mm sq. Plastruct, plasticard and tape strips. Supporting header beam made from 2mm thick card. The columns slot into the beam and can be adjusted up/down so that they all touch the platform surface before final fixing. Cheers Darius
×
×
  • Create New...

Important Information

Terms of Use

  I accept