derek

I would be interested to hear any replies on this as I am also looking for signage for a scratch buillt pub on my layout. Would prefer Guinness, but would take Harp or Beamish etc, But not Smithwicks uuughhh,,,,,,

If only someone in Ireland had some Mk2,s for sale......... Chaps

I have 4 CIE mk2s for sale. 3/ composite (5152) and 1/ 1st (5102). They are a bit too modern for my liking so they have to go. Bought them to run with my A class (027) but never thought they suited . now I have the Park Royals pre ordered, so have to make room. I am looking for 75euro each plus p+p. Or could meet in Limerick area. Never really run, and in original boxes like new

Sorry one more thing. Will the livery be same as 027?. I,m going to guess yes.......... Hopefully

delighted to hear this announcement as I have been trying to source some cie rolling stock but was not gonna pay the gougers on some sites for cravens. Real arm and a leg stuff . I was seriously considering buying some random lookalike coaches and attempting to paint them myself. The " Irish" part of my collection consists of one IRM Aclass (027) (superb) and four MM carriages. It was all Hornby stuff with me before I even realised there was an Irish modelling scene. Just a couple of questions on the Park Royals: Will the couplings be the same as those on the A class, as the ones on the MM coaches have my head melted. They just dont line up. And on the expected delivery date: In the original announcement by Warbonnet, quarter2 of 2024 is given but earlier on this thread Stephen mentions next January. Just wondering which is it?. Doesn,t matter either way as I will be pre ordering three at least. Thanks

thanks for the detailed reply Alan. Guess I will have to test out the quality of the family printer and see what happens

Unbelievable work here Alan. The level of detail is mindblowing. Just wondering where you get your figures, particularly the three lads beside the C N wagon. (One with a mug of tea in his hand). Also , your company signage. Are the signs handmade or made to order, as you mention that they are named for your four great Grandfathers.? If handmade, fancy sharing techniques?. Thanks and well done again

Just wondering if anyone has used W/S rusty rail markers? When I try to paint the side of my tracks I find that the tip "rides over" the plates, so I just get paint in the spaces between the sleepers and have to spread paint with a fine brush, totally defeating the purpose. On the video tutorial on W/S site this problem doesn,t occur. Thinking it,s my track maybe- basic Hornby track. Maybe the gap between the underside of the rail and the plate is too narrow to allow the marker tip through? Thinking of trimming the tip with my trusty Stanley knife? Also while I,m at it, weathered tie marker doesn,t seem to make any difference to the sleeper colour. They just seem to stay the same black colour. Has anybody else found this? Patrick told me he used these track painters and his track looks great ( like all of his layout). Just wondering if I am doing something wrong. Thanks in advance for any help.

happy to report that both loops are now working indepently and properly. Taking both of your advice I removed some ballast from under the suspect left hand point clips, and lo and behold I can now isolate each loop as I wish . Thanks for the helpful replies

sorry, dont know how that last post appeared. Anyway thanks for the help lads, especially that extremely one from Signalpost. Really went the extra mile to help. I think those clips could be the problem okay. When I switch the power to the main oval I have to use a little piece of wood to keep the blade fully connected ( the little black set up just before the bridge) so I think that left hand points is definitely not operating properly. I cant get near it until the weekend, but when I do will report back. Thanks for the kind words too on the scenery, although I,m not too sure myself. The bridge and tunnel facings were made of 6mm mdf, with a wood chisel used to carve out stonework. I have since discovered the joys of modelling clay and intend to replace the bridge at least. Here is another bridge on same layout from clay. Thanks again

sorry here are the r/h points

Yes I understand what you are asking and I can confirm that a loco will run in both directions on the "black" oval without entering the "red" section. The points are Hornby straight left and right hand points. Here are some pics (not sure if they help) First l/hpoints and then r/h. Incidentally I have the same set up at the station and have no problems. I think I may have to dig out one or both of the points in queston and replace them. sorry here are the r/h points

Thanks for the replies. George, can I ask what are "baccy couplings"?. The termonology in these replies is going over my head to be honest. I just refer to my couplers as "Hornby type". The A class I have lines up with everything else I have exept for these MM carriages. Is it possible to just remove the sprung couplers on the carriages and swap for the type on the A. thanks again......

Here is a pic of the full layout. Points are hornby straight points. Cant show underside as they are fixed and ballasted. Two loops with a controller for each.

My Murphy Models carriages have couplings which are slightlly higher than those on my IRM A class. Although I can run them, it leads to quite a number of uncouplings. Very annoying. Can I swap out the MM cou[lers and is this a big job?. I,m sure I am not the only one to have come across this problem. Dont know if pics helpThanks in advance.

Hi, just wondering if anyone can tell me what is going on with my layout? If I run a train on the black section and have a "dormant"one sitting in the red section, both trains will move although both points are switched to the black section. If I run the outer loop and sit a loco at point X, I dont have a problem. Layout is powered by cheap and cheerful Hornby analogue controllers. Any help would be appreciated. Thanks

Thanks yet again Patrick. Will go with W/S rusty rail and weathered tie for sleepers I think

thanks for that Patrick

Hello all, one more question. Is Woodland Scenics Foliage the same product as W/S bushes?. Looking at Patrick,s amazing layout he mentions using W/S bushes. I have been using foliage clusters up to now to form bushes but was hoping that the W/S pack of bushes were pre formed. However looking at them on W/S site, they dont appear to be any different from foliage. Sorry for the long winded question.

Hi, just wondering if anyone could recommmend a quick way to weather/ colour track and sleepers. I have quite a bit to do and I cant see myself giving half my life to painting with a fine brush as I have seen on some videos. (Apart from the potential mess, as most of my track is already in place). I have seen Woodland scenics pens but the choices are very limited- rusty rail would be fine but weathered tie is a bit light looking. I was hoping for a dark brown to look a little more like the creosote soaked sleepers of Ireland. Any help would be appreciated. Thanks

thanks for that lads. noticed a notice on noch site stating they were having trouble with software, affecting processing orders, no other details. maybe thats the problem. might try those two other sites the guys named. thanks again

is anybody on here having difficulty buying stuff from noch website? trying to buy some scenery bits, but when i try to check out, i am told something went wrong. have tried different methods of paymment to no avail

Hi all. Having come to the conclusion I will probably never posess any Murphy Craven coaches, without totally breaking the bank, I have decided to get some similar carriages and repaint. What I am looking for is the ral number/code for the orange/tan and black paints used on the irm a class I have. It is 027s, cie livery. Any help would be great. Maybe Stephen/ Bosnakay might be able to throw some light on the subject. If these paints were in the Humbrol acrylic range, even better. I can only hope. Thanks, Derek.

Thanks for that

Jhb, do you mind telling me what colour/type of paints you used on the little arched bridge, and surrounding walls. Constructing a stone bridge at the moment and that,s the look I,m after. Thanks. Layout is amazing by the way