Jump to content

Glenderg

Members
  • Posts

    3,487
  • Joined

  • Last visited

  • Days Won

    11

Posts posted by Glenderg

  1. Ah sorry Railer, It's hard sometimes to answer these things without photos! These are the heavy duty versions of the bogies, with the "sticky outty bit"* found on the bogie cements, ammonias and a few others. 

    *technical term :P 

    • Funny 1
  2. 5 minutes ago, Railer said:

    What is the technical name for the sheet metal that covers the bogies on the flats. The later flats seem to have them. 

    Theses are the infilled panels you refer to (they would be the 47' variety) ? Sometimes in ordinary plate steel, sometimes in chequer plate. Some wagons were entirely plated over for Per Way duties.

     

    12909497_10153354608185933_7549745221995600793_o.jpg

    • Thanks 1
    • Informative 1
  3. So prior to the introduction of bogied freight in 1971, the only bogied frieght stock would have been the short wheelbase Guinness grain wagons, which sounds like The Creator got his priorities right :P R.

    • Funny 3
  4. H Vans? Triangulated underframes like that on the weedspray tankers? We can't be having that kind of talk now, next thing ya know folk be going on about Bullied Opens, 10 and 12 ton brake vans, all sorts. Isn't that right @leslie10646  :P 

    • Funny 1
  5. 42 minutes ago, Railer said:

    A question about the 42fts. Are you going to offer round buffers as an option like the UK HUO hoppers. Same with the older Ride Control bogies or just to another run or older 42s. Also will there be a version with the spark guards fitted? 

    Yup, Round buffers and Ride Control Bogies too, such that those who want to run older pattern wagons can. For instance, the Guinness train was almost exclusively Ride Control, and the current spoil is Sambre et Meuse, so the serious detail enthusiast will be accommodated.  The buffers will be sprung too. 

    I wouldn't mind but a pair of those buffers is stuck to something else  on the North Wall, (which we didn't announce) so I've something to measure off. R

    Edit - I didn't have time to finalise the cad on the buffers and Ride Control bogies,  but as soon after I've had a lie down in a dark corner, I'll tidy them off and @Warbonnet will keep yez updated with progress.

    The spark guards on the bogies are for heavy duty only, like the shale, bogie cements and the ammonias. 

    • Thanks 2
  6. First off, many thanks for the positive waves gents, its been an inordinately busy 2018 from the Research and Design team. 

    To that end, I need to thank Kieran Marshall, Colin Brack, Herrflick, the per way group on FB, Finbarr O'Neill, Neil Dinnen, aka The Wanderer, the bauld Weshty, even Jhb with his Australian photography, but especially John-R for some lifesaving shots of the older 42's.

    Without the resources that folk post here and elsewhere, we'd be hamstrung at times, and I'm enormously grateful to this wonderful community for saving me going to the North Wall with a measuring tape in the rain! 

    As for the release of all these projects at the same time, this is a practical decision from both a design and manufacturing point of view. 

    All loads and wagon variations have to be designed at the same time to ensure compatibility with the base wagon. 

    Similarly, our manufacturer would not be impressed if we were to stagger this over a number of years, which would involve forklifting the moulds in and out of cold storage every 12 months or so. 

    So, from a design and manufacturing  point of view, it makes sense to get them to D12 as soon as possible. I, personally, don't expect a bread/milk scenario of zombie proportions that we've seen recently, with our wagons. We have the shelf space, and when it suits to purchase, they will be there. 

    Fran alluded to various savings and payment options earlier, and he'll expand on that in the coming week. 

    Richie. 

     

    • Like 8
    • Informative 2
  7. In my humble opinion, Eau-de-nil is really really light, more of a toothpaste level of colour saturation than the vibrant colours shown. I know there's headboards from headhunters and so on, but the colour is just a really washed out version of the main green colour. 

    I painted these coaches many years ago with what I consider to be the lighter shade, with commensurate eau de nil for the stripe, and when glossed up, and weathered, tone to match photo's I've referred to. Much paint was messed about in trying to get a shade right that I thought might be right. Could still be wrong, mind, and would happily admit it. 

    The other shades shown are bottom left a CIE green (I think, could be ammonia frames too) , and right, an RPSI Green to match the MK2 coaches and bachmann yank ones. R

     

    Edit - Would it be possible there are two Eau-de-Nil  shades to match each period of CIE green @jhb171achill

    DSC_0154.JPG

    • Informative 1
  8. Zinc Ore is a horrible bit of goods, seriously corrosive and can destroy a paint finish in little or no time. There's a reason why there's not many shots of the wagons up on the tippler. It would be so easy to ascribe a "grey livery" to what's actually "red oxide", but blink and things change. Here's a shot I grabbed off google earth many years ago, to highlight the mad colours as they change.

    When talking to our man at North Wall, it became clear that these are the hardest working pieces of stock, not just MK4's etc., on the network, and they see a similar level of scrutiny from an inspection point of view that should see them working for some time to come.  R.

    Edit - Mr. Brack, hardly a day goes by that the Curious and Questioning Department of IRM /Accurascale doesn't access your library. Many a bet has been settled on foot of photographic evidence, for which we're all so grateful. 

    tararake.jpg

    • Like 1
    • Informative 1
  9. 23 minutes ago, jhb171achill said:

    I'll go for the "over-estimated futile panic" theory. 

    My theory on what's happening: I call it "winter". There will be no minus twenty, no two metres of snow. Remember where you read this first; my pleasure.

    By the way, what's a weather "event" meant to be? What inane and stupid terminology, says jhb171 the grinch.

     

    Snowman-_Snowman_Prophets_of_Doom.png

  10. 2 hours ago, iarnrod said:

    Also, Richie mentioned at some point about providing a spreadsheet with the livery details for each wagon. Have I missed this along the way or have you IRM lads been working him to the bone with all these new releases for 2018?

    Yes. :P 

    As to the stenciling, the BULK CEMENT on the Pack B was hand drawn as I had a perfect side on shot from Lmk Jct. and its a really well spaced out bit of text on the proto.  But on the orange ones, the scale width between the characters is 6 - 12mm  in prototype or about 0.07 - 0.14mm in model terms , and the characters are all really compacted  Combined with the tampo process (and I think our chaps are top of the class in it) even a few microns of ink one way or the other may give the illusion that it's not a stencil.

    (If you ever hear of me getting a hiding whilst in China, it might be the Tampo man, such are the demands we ask of him at times :P )

    But on a related topic, we now have a full alphabet/font of wonky CIE text to use, all hand drawn, based on the prototype samples, for all test codes and so on. Basically we've replicated the process of a person putting a mask on a wagon, stamping it with a sponge full of paint, having a rough edged finish when complete, and scaling it down to 1.31%.  WooHoo!!!

    R

     

     

    • Like 2
  11. The decoration/tampo looks tighter all round, would love to see them in the flesh. The white lines appear crisper, if that makes sense? 

    Agreed Rich, the benchmark for coaching stock, especially when you consider the width and airyness of the proto in comparison to the like of the MK2 A-F coaches. R.

    • Like 1
  12. Deadly! Really good light to work from, even if it's tedious decal stuff.

    As an aside, Lidl/Aldi do an A3 cutting mat every now and again,  8 Bobs or thereabout, if you ever start running out of cutting surface.. Richie.

     

    • Like 1
    • Informative 1
  13. On 2/18/2018 at 5:49 PM, Broithe said:

    Love the bookshop...

    Full of meandering tales, some taller than others, plenty truth, a hint of equivocation, but a goldmine nonetheless!

    Back to the layout - I just love the architectural juxtaposition of windows and symmetry, or lack thereof. So well captured, and as for track, just yummy...R.

  14. JB, 

    I got catering tin foil, sprayed spray mount glue on it, and folded four sheets over to give it some density. I got some corrugated plastic and cut two pieces to size to make a simple hand press. Cut the tin foil into long strips and used a little roller from the kitchen drawer to get even compression and glued it to the cardboard base of the roof. Plenty wobble in it to look prototypically wonky! Takes ages to make that amount below, mind. R. 

     

    DSCF5075.jpg

    • Like 1
    • Thanks 1
    • Informative 1
    • WOW! 3
  15. Always on both sides, but no reason nor rhyme to placement, so long as they are along the solebar. 

    It's down as 12-04 for the first two (December 2004) and there'd be a few months between the ULT test usually, so it might be ULT 5-05.  Interesting to note the alternative placement of running number between lower left and centrally on the doors when compared with my photo above...

    High-Sided Open Wagons

     

    • Like 1
  16. Robbie, 

    Hope the attached photo helps with locations. Open to correction here, but I believe that D-LK is brake test carried out in Limerick, GR-LK is General Repair, and ULT is ultrasonic, carried out in the North Wall. First two are generally grouped together since they are usually done at the same time. R. 

    Beet_Decal_Locations.jpg

    • Thanks 1
    • Informative 2
×
×
  • Create New...

Important Information

Terms of Use