Jump to content
  • 0

CIEs 1948 order for 6 1800bhp express locomotives for Dublin-Cork line.

Rate this question


Question

Posted (edited)

CIE decided in the mid-1940s to replace steam with diesel following a fact finding visit to the United States, this lead to the ordering of the two-mixed traffic Sulzers 1100-1101 and the Mirrless diesel shunters. 

CIE also placed an order for 6 1800bhp 'express locomotives" with twin Sulzer engines and Metropolitan Vickers electrical equipment presumably to replace the 4-6-0s on the Cork Line.  CIE was forced to cancel the order by the Government (the Milne Report recommending that CIE continue with steam), but required to purchase the engines and electrical equipment which were eventually used in the B101 Class.

Has anyone information particularly diagrams or artists impressions of these proposed 1800bhp 'express locomotives"?.

Jack Kennedy spoke of the locos running on 3 axle bogies (same as contemporary American practice  for twin engined American passenger locos) both Alco (DL109 & GM E Units had twin engines with similar power output, CIEs 1st Diesel programme (1945/6) included a single cab mixed traffic loco and a Luxury railcar set for Tourist Traffic possibly inspired by the CIE Chairman A P Reynolds visit to the United States. https://www.dib.ie/biography/reynolds-augustus-percival-harald-percy-a7636

He was appointed to the GN Board and acted as Chairman on a bi-annual basis following the re-election of Fianna Fail and is likely to have advocated for investment and modernisation of the Northern.

Interesting to envisage what would have happened if the Government had acted on Reynolds 1948 advice and allowed him to remain Chairman.

Edited by Mayner
  • Like 4

6 answers to this question

Recommended Posts

  • 0
Posted

IRRS Journal Vol.14 No. 86, October 1981, contains two articles of relevance. 'Sulzer locomotives of CIE' by D Renehan and 'CIE's first diesel programme' by J J Leckey. No diagrams or artists impressions but some useful background.

The book on CC1 has a few paragraphs (page 25).

There seems to be rather more information published on the GNR's planned diesel fleet than CIE's early plans.

  • Like 1
  • 0
Posted

This may also be useful:

CIE 101 class, 1100, 1101, sulzer in eire

This was an early Sulzer diesel loco from 1939, which has some family resemblance (curved cab front, 3 windows) to the Sulzer-engined locos built by BRCW for British Railways (e.g. Class 33) but nothing much in common with the Irish Sulzers (even though the B101s were also built by BRCW) so trying to infer a styling or appearance from contemporaries may be a flawed approach.

Sulzer morning

 

  • Like 2
  • 0
Posted
2 hours ago, Mol_PMB said:

This was an early Sulzer diesel loco from 1939, which has some family resemblance (curved cab front, 3 windows) to the Sulzer-engined locos built by BRCW for British Railways (e.g. Class 33) but nothing much in common with the Irish Sulzers (even though the B101s were also built by BRCW) so trying to infer a styling or appearance from contemporaries may be a flawed approach.

Sulzer morning

 

That's a Swiss Railways BM4/4 II class diesel https://www.trainsdepot.org/en/vehicle/589/bm-4-4ii-18451-18452

Irrelevant to make any Irish comparisons aside from the Sulzer engines

Dont forget Oliver Bulleid was pushing for American locos in the early 1950's having seen what was happening on American Railroads even before WW2, Irish Beef Exports to the UK were one of the factors that prevented this from happening - initially at least, so when CIE needed more diesels after the A/C class debacle the order went to EMD. Would have been interesting to see what would have happened if he was allowed to go to EMD in the early 1950's and if the GNR had proceeded with their diesel locomotive plans - they wanted electrification too and if this happened in the 1950's it all would have been sourced from Continental Europe, not the UK

  • Like 2
  • 0
Posted
11 minutes ago, Blaine said:

That's a Swiss Railways BM4/4 II class diesel https://www.trainsdepot.org/en/vehicle/589/bm-4-4ii-18451-18452

Irrelevant to make any Irish comparisons aside from the Sulzer engines

Dont forget Oliver Bulleid was pushing for American locos in the early 1950's having seen what was happening on American Railroads even before WW2, Irish Beef Exports to the UK were one of the factors that prevented this from happening - initially at least, so when CIE needed more diesels after the A/C class debacle the order went to EMD. Would have been interesting to see what would have happened if he was allowed to go to EMD in the early 1950's and if the GNR had proceeded with their diesel locomotive plans - they wanted electrification too and if this happened in the 1950's it all would have been sourced from Continental Europe, not the UK

I am aware what type it is - I took the photo and travelled on railtour behind it. However, I disagree that it is irrelevant to the discussion of CIE's early diesel traction and @Mayner's original question about the Sulzers and CIE's early diesel plans.

CIE 1100/1101 and the proposed six large twin-engined locos used Sulzer engines; in the mid-1930s their LDA series was one of the first European designs to evolve into something specifically designed for rail traction. The Swiss Bm4/4ii locos of 1939 were one of these early applications of Sulzer engines to rail traction. When CIE and their potential suppliers were investigating options in the early 1940s, they would have been a key reference. In J.J. Leckey's article on CIE's First Diesel Programme these Swiss locos get a specific mention, not just for the Sulzer engine but also their Brown-Boveri electrical equipment. Alongside 1100 and 1101, in 1945 CIE decided to order a 4-car diesel electric passenger train and this was intended to use the same Brown-Boveri electrical equipment as in these Swiss locos. The plan for the 4-car diesel unit was cancelled, but it does demonstrate their relevance to the early designs for Ireland.

 

It's true that Bulleid had a strong preference for EMD designs for good reasons, and EMD initially proposed a 'type EX' 600hp A1A-A1A with styling similar to their 'BL2' for the US market. 

  • Like 3
  • 0
Posted

There's a report from the early 50s(?) which actually advocated the building of new steam locos, tied in with a proposal to cull a lot of the numerically-weak classes in an attempt at standardisation. Interestingly, the usefulness of the 2 K2 class locos (461 and 462) was noted and they would have been spared from the 'cull small classes' plan, had it come to pass. I must dig it out, but it suggests not all in CIÉ where necessarily committed to full dieselisation at that point.

  • Like 1
  • 0
Posted
39 minutes ago, Niles said:

There's a report from the early 50s(?) which actually advocated the building of new steam locos, tied in with a proposal to cull a lot of the numerically-weak classes in an attempt at standardisation. Interestingly, the usefulness of the 2 K2 class locos (461 and 462) was noted and they would have been spared from the 'cull small classes' plan, had it come to pass. I must dig it out, but it suggests not all in CIÉ where necessarily committed to full dieselisation at that point.

That was the Milne report of 1948, as mentioned by John. It advocated for mass standardisation of the steam fleet (and maintenance practices) down to 2-6-0 and 0-6-0 types to cover all work.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use