Tullygrainey

That’s a very generous offer Paul. Will be in touch.

Me too Nelson!

Casting around for something to do at the weekend. I'll need a few more bits of rolling stock for Kilmore. I made these moulds from plasticard and brass masters a few years ago. The trick is to pour just the right amount of resin into the mould so it's fully filled but doesn't rise above the level of the top of the mould. I haven't mastered that yet so these castings need a lot of work with files before they can even be glued together to make a reasonably square wagon body. Provincial Wagons this ain't! Making the body is just the start. Chassis are the next challenge. In the past I've used hacked Dapol kit chassis and sprung etched brass kits from Brassmasters. In the case of the BCDR stock, outside W irons are an added hurdle. Currently, I'm using bits from MJT wagon compensation etches to make these but it's challenging, very time consuming and uses only a few modified bits of the etch and not in the way intended. Also, what's left of the etch isn't much use for anything. There must be an easier way! Alan

Brilliant stuff! Layout and stock all looking magnificent. Wish I could've been there.

Kilmore up.mov

I D spair of you lot

I picked up a second hand copy of Martyn Welch's book a while back, browsed it, put it on the shelf and forgot I had it. Must go back and read it properly!

Nice work Patrick!

I think for me that might remain a bridge not crossed

I've looked at CSB but I've yet to try it. I find it hard enough to fit a single compensation beam between the frames as it is. As well as getting it in the right place!

His basic thesis seemed to be that in order for them to work properly, compensated axles need to be able to tilt. Any system that inhibits or doesn't allow for this won't work as effectively. It makes sense to me but yer pays yer money...

Yes David, nice crisp etches which seem to go together well. Like many kits of the era though, the instructions tend to assume a certain amount of prior knowledge and can be a bit vague in places. I suspect a novice builder would be pretty flummoxed. As an example, there are half etched cutouts for hornblock mounting but no reference to these in the instructions which describe building a fixed chassis. The builder of a compensated chassis is assumed to know how to do it I suppose. There's no guidance on, or provision of etches for, compensation beams.

Another High Level gearbox takes shape - a RoadRunner Plus this time. This one is destined for a GNR(I) AL Class 0-6-0 locomotive which Kieran Lagan is building in 4mm from a NorthStar kit acquired at the Bangor Show. IMG_3655.MOV

Coming along nicely Patrick

Innovation and improvisation. Name of the game. And if it works, it ain’t wrong.

Makes it seem like you’re standing lineside.

Always tricky going round corners. That arrangement works well.

All the best for the exhibition John

The Stone Yard had an outing to the Erne Model Railway Club's annual exhibition in Enniskillen on 20 September. Many thanks to the EMRC for an enjoyable show and to Kieran Lagan as always for help and for this photo. An angle not often seen.

Actually it’s a flight of fancy

Maybe, but I think we may be looking at the rear of the train. I don't see a driver and the destination board seems to say Central.

Let there be light. Someone appears to have nicked the lead flashing from that roof. That needs seeing to.

Did you warn the new owner about Mr Weaver Patrick? Or has he really retired? I'm sure I can already hear him issuing orders.

Stanley Unwin! Brilliant. He was a one-off. The only man able to talk completely comprehensible gibberish.