DJ Dangerous

Cheers, @Si2020 . It's just to test the loco, and I was afraid of doing damage.

So would a drop of standard Super Glue in the centre, combined with silver glue on the contacts, work?

I've seen syringes of silver glue on Amazon, designed for repairing contacts on PCBs, but am not sure if they're any use. I have three 'phones that have been dropped and knocked once too many, including the one I'm typing on, so need to get them working again.

Is there an alternative to soldering for circuit boards? I'm assuming that Super Glue etc are insulators rather than conductors? Not actually railway related - I'm replacing the battery in a mobile and one of the two connectors broke away from the board. The other unclipped fine. Just thought that IF there is a solution, this might be applicable to the PCBs in locos as well. Very hard to get them in focus for the photos as they're so tiny, these are the best I could take. The connector that broke away should be to the right of, or above, depending on your perspective, the "2". I do have a soldering iron but the tip is bigger than the whole connector here!

Hatton's photos say:

What happens if I put an A Class LokPilot into a Class 92? Does it blow up or does the motor burn out or what? Class 92 LokPilots are currently out of stock from IRM: https://irishrailwaymodels.com/products/class-92-deltic-dcc-standard-chip?_pos=23&_sid=20b57f2a4&_ss=r Hatton's don't have them listed, and Accurascale postage has been revoked since the Royal Mail hack.

Just got the same email. Twelve models currently listed: https://www.hattons.co.uk/stocklist/siteresults?search/scales/OO/brands/Murphy Models/sub-types/CIE Mark 2D/liveries/Irish Rail | Iarnród Éireann/stockstatus/all Please, please, please don't let everything arrive all at once! MM Mk2D's, MM 141 / 181 re-run, IRM Park Royals, Hatton's Genesis coaches, Heljan Mk2's... Shit!

What were you trying that was getting the locos wheelspinning? I like the 'phone box! And is that a DAF 2800 with a fuel tanker?

The video description is useless, but in one of the comments, he says: "Sorry - I should have been clearer. There is a Scotch block that rises just inside the rail and acts against the wheel. The slot through which it comes is discrete, and it all seems to be effective." And then: "Hi Bruce. The stock is held back by a rising wheel chock, detailed here. https://www.youtube.com/watch?v=Mf3d-Lq8QrQ&t=218s" In the subsequent video, he does go into detail - it's a 3D printed actuator that physically rises up through the track:

You don't know the half of it. She's one of the most dangerous ones here. Aside from the cats, the fine sand in the air gets everywhere - even with doors - so I have to do my best to keep it out.

A nice, modern bus at that! Still no KC available?

What did he do? Looks like a death ray.

And that's that for today!

We have clearance, Clarence! Both O Gauge and OO gauge holes seem appropriate for what I'd wanted, at least for now. O Gauge feline is a tight fit but somehow squeezes through. That's all for now, duty calls...

Tex reefer off the TF1 by the Chio roundabout on Tuesday 1st. Another hotspot.

Getting closer! Feet on and wall brackets on...

A Nice Cronos 6,1m x 2,9m / 20' HC (CRTU-0700874) near IKEA in San Miguel back on Tuesday 22nd. Container hotspot there, almost always something interesting. Have a few more since then to add as well. Trailer looks to have an extra metre or so to spare, wierd length for a trailer, no?

Have you looked at adding a servo for remote uncoupling a la McKinley?

What are the limitations of the magnetic Dellner couplings? As in, what don't they work with? I've tried them with an A and a single Container Flat, but with the notorious coupling mechanism on the older Flats, they uncouple while moving slowly over points. @Sean has been testing these pretty thoroughly, so maybe he can list a few incompatible combinations? Also, aside from grabbing both pieces of rolling stock to pull them apart, is there any trick for more subtle uncoupling of the IRM magnetic couplers? Like, tapping them with another magnet or something?

Sure it looks like it was never even opened!

Mad dash to La Laguna for a replacement, back down south by five, measured, marked, scored, drilled, cut and cleaned, ready to pack up again and take home for trial and assembly...

And we have a casualty! Finished the first side off no problems but the second side didn't like not being supported properly while absorbing 100kg of downward force. Oops!

Not a running session, but something that will one day play a part in them. That's enough for today, more IKEA butchering tomorrow.

Only a decade out!

Just have to add to this thread again. Have been in touch with IRM a bit lately, poor aul' @Garfield must be sick of me, but the courtesy and proffesionalism is unflappable! I tend to keep odd-ish hours, probably don't sleep enough, anybody who gets close to me says that I have a thyroid problem and I'm overactive, but bejeesus, Patrick takes the biscuit. I'm genuinely starting to suspect that P.A.T.R.I.C.K. is an acronym for some kind of AI supercomputer with a deepfake face edited into a handful of photos to fool us. Powerful Artificial Turbocharged Resident Intelligent Computer Kit, I dunno. Credit where it's due, we are spoiled with this kind of service.