Jump to content

BosKonay

Moderators
  • Posts

    8,913
  • Joined

  • Days Won

    2

Everything posted by BosKonay

  1. Disconnect the frog and you should be ok. Otherwise cut the connectors under the point that bridge the frog to the rails.
  2. Did you cut the connections under the point to isolate the frog? Is your controller shorting?
  3. If you are feeding power into the point then make sure the frog isn't wired up? Can you describe in details what's connected to what and how?
  4. Can you give more detail? You should be feeding power to the 'single' end of the point only. Unless you've adjusted to point itself powering the frog separately will cause a short.
  5. Cheers Anthony - will give that a lash too! The more the merrier! Ironically, I've an A4 that's a better puller than the 201 (but then she has 150g of Lead stuffed into her (and sound, and smoke, and a heap of leds )
  6. Having watched the video, the loco is stalling as soon as it hits the points - how are you feeding power into the point itself?
  7. Basically swap the wires that feed the switch / motor around
  8. Simplest is upload to youtube, then embed the video
  9. @heirflick - yep, they are a curse @kevrail - you know, I don't know! I have a little box of 8 of them, they are a whitemetal kit, but I've no details at all about them! I've a pair of DCC Concepts ones that are very similar looking with lights that I plan to use too
  10. Flogging a dead horse
  11. The point is 'out of the box' -ie: point blades are routing the power? Sounds like you need to reverse the polarity of the switch?
  12. I hear ye :)
  13. Not sure on the pc. I've heard mention of anyrail and xtracad I gave a buffer a lick of paint. Not red enough?
  14. It's RailModeller for Mac http://www.railmodeller.com
  15. Lol no but some means if slowing time would help
  16. Here is the latest, as laid track plan. 22 Feet across the top, 13 feet top to bottom. As you can see, Blackrock Rd. Depot (on the right) and Cement Branch on the left are still 'open' and unlaid. All the track pictures is now in place and powered.
  17. Absolutely - one is a bit overdue, as some elements 'evolved' away from the plan I'll do an updated track plan to 'as laid' and grab a sequence of photos around the layout asap! The overall dimensions are 22 feet x 13 feet.
  18. BosKonay

    New IÉ logo...

    Sharp eyes Rich - the I of the IE is indeed Green in that pic
  19. Have a bottle on order thanks! Has anyone applied it to a 201 before? Any recommendations on which axle for maximum grip?
  20. BosKonay

    New IÉ logo...

    Sounds very 'british' in scheme... wonder how a 201 would look in it too...
  21. Will work up a few more videos
  22. I've found it actually very easy to use
  23. Ya will ya will ya will
  24. Cheers Fran!
×
×
  • Create New...

Important Information

Terms of Use