Past-Avenue 3D prints

[Past-Avenue]

Hi all .

I've recently started into 3d printing and have made a few small bits that were missing from my models ie...wipers/ horns and tail lights.  All of these parts were either unavailable to buy or hard to replace. The tail lamps and warning boards sit onto the lamp irons just like the real thing and can be moved from loco to loco or wagons that have lamp iron details.  I pushed myself and attempted to produce the double height beet wagon.  I designed it from pictures and videos and to fit onto the Dapol prestwin chassis without any need for glue etc...and had positive feedback that it looked passable with the modelers licence.

My idea is that, if you have a rake of prestwin chassis you can change the body's and keep your costs down. I am currently working on other projects that will suit the chassis so they are interchangeable.

I have attached some pictures of the stuff that I've made and the costs below. If you would like anything please pm me.

Thank Tail lights 50 cent each  Warning boards €2 per pair 

 

Weathered beet wagon €20

primed beet wagon €15wipers and horns to suit MM 141s/ 071s 50 cent each 

 

Edited March 18 by Past-Avenue
Updated

[Past-Avenue]

Hi all 

I've printed the early steel sided cement wagon as in the picture. Again I've drawing them from pictures and videos to get as much detail as I can and that I can print and I'm pleased with the results. These wagons are designed to fit onto the Dapol prestwin chassis without any need for glue etc. I'm producing them and if your looking for some or any of the other 3D items I'm doing please Pm please. Enda 

 Body only weathered €20Bare wagon body €15 

[Fowler4f]

*

Edited April 14 by Fowler4f
Edit