Past-Avenue Posted March 17 Share Posted March 17 (edited) Hi all . I've recently started into 3d printing and have made a few small bits that were missing from my models ie...wipers/ horns and tail lights. All of these parts were either unavailable to buy or hard to replace. The tail lamps and warning boards sit onto the lamp irons just like the real thing and can be moved from loco to loco or wagons that have lamp iron details. I pushed myself and attempted to produce the double height beet wagon. I designed it from pictures and videos and to fit onto the Dapol prestwin chassis without any need for glue etc...and had positive feedback that it looked passable with the modelers licence. My idea is that, if you have a rake of prestwin chassis you can change the body's and keep your costs down. I am currently working on other projects that will suit the chassis so they are interchangeable. I have attached some pictures of the stuff that I've made and the costs below. If you would like anything please pm me. Thank Tail lights 50 cent each Warning boards €2 per pair Weathered beet wagon €20 primed beet wagon €15wipers and horns to suit MM 141s/ 071s 50 cent each Edited March 18 by Past-Avenue Updated 13 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted April 14 Author Share Posted April 14 Hi all I've printed the early steel sided cement wagon as in the picture. Again I've drawing them from pictures and videos to get as much detail as I can and that I can print and I'm pleased with the results. These wagons are designed to fit onto the Dapol prestwin chassis without any need for glue etc. I'm producing them and if your looking for some or any of the other 3D items I'm doing please Pm please. Enda Body only weathered €20Bare wagon body €15 12 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted May 30 Author Share Posted May 30 Hi all .. I have the curtain sided pallet cement wagon in stock now aswell and there's a few more I'm finalizing and will announce them soon. Attached are a few pictures starting with the bare body and the finished wagon with decals. If you require any of the 3D printed items that I make PM please . Thanks Enda Bare wagon body €15 10 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 2 Author Share Posted June 2 (edited) Hi I've finally got these wagons done and I'm printing them now. They were used on the Foynes to Ballina Asahi coal and oil train from the early 70s to late 90s. A variation of the tanker was used as a water barrier on the Ammonia train. Coal body €12 Tanker €15 These sit snugly on the Dapol prestwin chassis witch can be purchased from Marks Models or other model shops. If you would like some of these or any of the other 3D items I'm doing please Pm. Thanks to Noel Enright for all the help in getting the information etc Enda Edited June 2 by Past-Avenue 7 2 Quote Link to comment Share on other sites More sharing options...
Galteemore Posted June 2 Share Posted June 2 Not my scale, not my era, not my thing, but these are terrific and ideal way for people to dip their toe into doing some modelling for themselves. Great work!! 5 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 2 Author Share Posted June 2 3 hours ago, Galteemore said: Not my scale, not my era, not my thing, but these are terrific and ideal way for people to dip their toe into doing some modelling for themselves. Great work!! Thanks Galteemore and it's opened up a whole new way to model and make items yourself. At the end of the day it's about the enjoyment we get from it and not a competition. 3 3 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 18 Author Share Posted June 18 Hi all. I've recently designed a NEM pocket height gauge for those who still do scratch building or just want to modifie there rolling stock. The gauge aligns the NEM pocket at the correct height and depth from the buffers and sits snugly over the rails. I also have the NEM pockets aswell in stock. I'm currently working on other types of NEM pockets for the lima boggies etc but not there yet. If you would like anything that I'm printing please pm.l 6 Quote Link to comment Share on other sites More sharing options...
Horsetan Posted June 18 Share Posted June 18 On 17/3/2024 at 9:15 PM, Past-Avenue said: ..... I pushed myself and attempted to produce the double height beet wagon. I designed it from pictures and videos and to fit onto the Dapol prestwin chassis without any need for glue etc...and had positive feedback that it looked passable with the modelers licence. My idea is that, if you have a rake of prestwin chassis you can change the body's and keep your costs down.... I had another look at this and wondered how they might look in company with the new IRM standard beet wagon. Or would they fit on the IRM triangulated wagon chassis? 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 18 Author Share Posted June 18 2 hours ago, Horsetan said: I had another look at this and wondered how they might look in company with the new IRM standard beet wagon. Or would they fit on the IRM triangulated wagon chassis? Hi I'm not sure as I don't have any of IRMs chassis but I would be able to resize my wagons to suit if required and help people to achieve what they want for their layout. 1 Quote Link to comment Share on other sites More sharing options...
kevin_gal Posted June 22 Share Posted June 22 Very impressive work. Have you ever thought about making conversion parts for a BSK / BCK generator steam van? 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted June 22 Share Posted June 22 On 2/6/2024 at 7:13 AM, Past-Avenue said: Hi I've finally got these wagons done and I'm printing them now. They were used on the Foynes to Ballina Asahi coal and oil train from the early 70s to late 90s. A variation of the tanker was used as a water barrier on the Ammonia train. Coal body €12 Tanker €15 These sit snugly on the Dapol prestwin chassis witch can be purchased from Marks Models or other model shops. If you would like some of these or any of the other 3D items I'm doing please Pm. Thanks to Noel Enright for all the help in getting the information etc Enda These look amazing!!! They'd be right at home on Tara Junction. Hint hint @ttc0169! 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 25 Author Share Posted June 25 On 22/6/2024 at 2:10 PM, kevin_gal said: Very impressive work. Have you ever thought about making conversion parts for a BSK / BCK generator steam van? Hi I'm currently working on conversions for the old Dapol and Lima boggies and hopefully have them sorted out soon. Thanks Enda 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted June 25 Author Share Posted June 25 Hi I've finally finish and have printed of some 10ft Uniload containers. These are now available at €10 or €15 painted and decals with a little Weathering plus postage. Pm for more information etc Regards Enda 8 1 Quote Link to comment Share on other sites More sharing options...
Newtoncork Posted July 9 Share Posted July 9 Thanks Past-Avenue, the barrier tankers and NEM pockets arrived today. All well packaged and looking great. Delighted with the NEM pockets and barrier tankers look the part. Thanks again! 1 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted July 22 Author Share Posted July 22 Hi all. I've add 2 more NEM pockets to the ltems I'm printing. Below in the first picture is a NEM pocket that can be screwed up to a chassis and will allow it to swivel if you want to use magnetic couplings or fixed tie bar's etc. The bottom 2 pictures are a NEM pocket to suit the Dapol prestwin chassis to replace the one that comes with the kit . The pocket height gauge is €5 and NEM pockets are €1 a pair . If you would like anything please pm me. Enda 4 Quote Link to comment Share on other sites More sharing options...
ttc0169 Posted July 22 Share Posted July 22 I would highly recommend Enda’s work.. 6 2 1 Quote Link to comment Share on other sites More sharing options...
Newtoncork Posted July 22 Share Posted July 22 And I would second that! 1 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted July 27 Author Share Posted July 27 Good morning all. I added a few more items to the items I'm printing . I have 071 brake cylinders 50 cent each/set of 5 electric boxes €6 unpainted / and a phone box €1 each all in oo scale . Pm me if you want anything I'm printing as I do have a stock of everything. Thanks Enda 10 1 Quote Link to comment Share on other sites More sharing options...
Past-Avenue Posted September 19 Author Share Posted September 19 Just 3D printed the NEMs for the Murphys Craven coaches for a customer. I have them in stock and are €2 each. If you would like anything 3D items I print please pm me. Enda 3 1 Quote Link to comment Share on other sites More sharing options...
WRENNEIRE Posted September 19 Share Posted September 19 Cheers Enda, looks like the dogs dangly bits Any idea where the springs can be picked up? 1 Quote Link to comment Share on other sites More sharing options...
.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.