spudfan Posted May 18, 2020 Share Posted May 18, 2020 I have a foldable homemade wooden saw horse. I put lengths of carpet gripper into the "V" section to help grip the wood being sawn. Might be of interest to any DIYers out there Quote Link to comment Share on other sites More sharing options...
Midland Man Posted May 18, 2020 Share Posted May 18, 2020 Any pics? I know someone who has a saw that is powers but a tractor buts it's not for sale. Quote Link to comment Share on other sites More sharing options...
Broithe Posted May 18, 2020 Share Posted May 18, 2020 I got myself one of those cheapo steel ones, with an attempt at 'teeth' on the upper sections. It's quite adequate for occasional use. Every single edge on it is sharp, though - you need to approach it with the care of someone picking up a dropped boxful of scalpel blades. It's more likely to injure you than the saw is! I'm reluctant to take the edges off, though, as that will go through the galvanising. Quote Link to comment Share on other sites More sharing options...
Mayner Posted May 18, 2020 Share Posted May 18, 2020 I would be very wary about using a metal frame if you use a chain saw to cut firewood. 1 Quote Link to comment Share on other sites More sharing options...
Broithe Posted May 19, 2020 Share Posted May 19, 2020 I'm always wary when using a chainsaw. 1 Quote Link to comment Share on other sites More sharing options...
murrayec Posted May 19, 2020 Share Posted May 19, 2020 30 minutes ago, Broithe said: I'm always wary when using a chainsaw. Me to! Quote Link to comment Share on other sites More sharing options...
skinner75 Posted May 19, 2020 Share Posted May 19, 2020 I like that homemade wooden one - very simple Quote Link to comment Share on other sites More sharing options...
Broithe Posted May 19, 2020 Share Posted May 19, 2020 (edited) 4 hours ago, Broithe said: I'm always wary when using a chainsaw. 3 hours ago, murrayec said: Me to! I'm not sure if they still do it, but McCulloch chainsaws used to have the following advice in the handbook - Chainsaw accidents are rarely trivial. The folding metal sawhorse has some advantages for me, in terms of storage volume and ease of transport. It doesn't get a lot of use, but it's never been used at 'my place'. If I had a great deal of use for one at the home location, then a permanent wooden one would be preferable. It's (saw)horses for courses, I suppose... I do keep one of these with me - if I need anything bigger then there's little point. Edited May 19, 2020 by Broithe 1 Quote Link to comment Share on other sites More sharing options...
murrayec Posted May 19, 2020 Share Posted May 19, 2020 Lidl did a folding metal one last week Eoin Quote Link to comment Share on other sites More sharing options...
Broithe Posted May 19, 2020 Share Posted May 19, 2020 5 minutes ago, murrayec said: Lidl did a folding metal one last week Eoin They're 'OK' for what they are, but even when it's folded and stored, it's capable of producing injuries from the sharp edges, if you were to pass by without adequate care. The odd cuts from the many sharp edges would be survivable, but potentially awkward - however, the shearing action when folding it is well capable of provoking a hospital visit. Even the task of assembling it should be undertaken with sturdy gloves on. Other than that, it's alright... Quote Link to comment Share on other sites More sharing options...
spudfan Posted May 19, 2020 Author Share Posted May 19, 2020 This has been on the go for years. You can see where the chain saw occasionally cuts the cross timbers but I just renew them as necessary. If you look at the "V" you should just make out the carpet gripper. The mainframe always stays intact. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.