Darius43 Posted September 26 Author Posted September 26 It’s a duck under access scenario. Power bus installation tomorrow. Cheers Darius 2
leslie10646 Posted September 26 Posted September 26 What was the base material of the signal box, Darius. It really does look the part! 2
Darius43 Posted September 27 Author Posted September 27 Hi Leslie, I used 2mm and 1mm thick card stock for the main structure and roof along with thinner card (photo print paper). For the cabin glazing I used clear acetate sheet (Ratio kit packaging). I used Ratio windows to make the large glazed units to the frame room. Cheers Darius 2 2
Darius43 Posted September 27 Author Posted September 27 (edited) Planning to use the same technique to build the station buildings and canopy for “Whiterock”. Cheers Darius Edited September 27 by Darius43 3
Darius43 Posted September 27 Author Posted September 27 (edited) Power bus installed below the baseboards with feeds to each length of flexitrack soldered to the undersides of the rails. Found one short due to one of the turnout frog rails not having an insulated joiner - fixed. Running fine on DCC. Cheers Darius Edited September 27 by Darius43 6
Galteemore Posted September 27 Posted September 27 (edited) Fab. Reminds me of 1979-1980 when 186 could be seen around Whitehead still in its Great Train Robbery livery ! Edited September 27 by Galteemore 2
Darius43 Posted September 27 Author Posted September 27 My first and only main line steam trip in Ireland was from York Road to Whitehead and back in 1978, hauled by one of those two locos - not sure which but I recall it was green. Cheers Darius 1
Galteemore Posted September 27 Posted September 27 4 minutes ago, Darius43 said: My first and only main line steam trip in Ireland was from York Road to Whitehead and back in 1978, hauled by one of those two locos - not sure which but I recall it was green. Cheers Darius 186. Was doing shuttles for an event. I was almost certainly on it myself flogging RPSI sales stuff! 3
Darius43 Posted September 27 Author Posted September 27 Dusted down the 70 Class for a run. I added pick ups to the trailing bogie of the power car to prevent gapping at the insulated frogs. Cheers Darius 5
Galteemore Posted September 27 Posted September 27 Wonderful. Thankful to have had the real thing on my school commute. 1
Darius43 Posted September 27 Author Posted September 27 And the 80 Class is now operational. Cheers Darius 6 1
Darius43 Posted Tuesday at 17:42 Author Posted Tuesday at 17:42 (edited) UTA trains in action. A Larne boat train and post war Railcars 6 and 7. Cheers Darius Edited Tuesday at 17:48 by Darius43 6 1
Galteemore Posted Tuesday at 18:14 Posted Tuesday at 18:14 Fab stuff Darius. Your models deserve a bespoke canvas like that ! 1
Hawthorn Posted Tuesday at 18:18 Posted Tuesday at 18:18 Hi. Your models are inspirational, and it is great to see them have an authentic layout for them to run on. 1
Darius43 Posted Wednesday at 17:47 Author Posted Wednesday at 17:47 Some 1960s NIR stock on the move. Cheers Darius 5
Darius43 Posted Thursday at 17:13 Author Posted Thursday at 17:13 Modified Oxford Diecast Land Rover using thin plasticard. Still need to add outer mesh screen to windscreen and touch in head and tail lamps - plus number plates. Cheers Darius 7
Darius43 Posted yesterday at 16:33 Author Posted yesterday at 16:33 Modified another OD Land Rover. Cheers Darius 6 2
.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now