Tullygrainey

Yep, that works better than an all-red cab. Plan C for me too then!

I would certainly buy 4mm etches for the BCDR 2-4-0 No 6. Am also tempted by the J26 and the GNR(I) JT class. And if we could stretch a point include the BCDR 6 wheel state coach, I'd have one of those for sure! Alan

Another little jewel from the High Level stable. This is a RoadRunner 60:1

You've made a fine job of that David. A terrific might-have-been. I remember reading your posts on the original build and being mightily impressed. I wanted one, even though I hadn't anything to run it on. The red and cream livery blends it nicely with the railcars but if we're taking a vote, I think I might favour an all red cab.

only by coincidence I suspect. It’s what was left in the paint-shop after a certain Hawthorn Leslie 0-4-0ST was outshopped.

Probably one of the longer lived ones Patrick - No 7 which apparently came to grief in an accident at Queen's Quay in 1949 or No 27 which was scrapped around 1951. Livery options include: a) Vauxhall Burgundy Red, because I've got the paint b) GNR(I) unlined black, so it can sneak in undetected at Brookhall Mill c) Some variation of BCDR lined green Probably c)

After the distractions of industrial railways, both standard and narrow gauge, it’s back to the County Down. After much pondering, I’m going to have a go at one of the BCDR’s 2-4-2T tank locomotives. Beyer Peacock supplied two of these in 1896 and 4 more in 1897. Before long they were edged out by the more common and more successful 4-4-2T bogie tanks. The first one was scrapped in 1924 but some were still working in 1949. Deciding how best to build a 2-4-2 chassis, I rummaged through my collection of guru advice. In Mike Sharman’s little booklet “Flexichas”, there is an elegant design with a floating gearbox cradle and compensated pony trucks each end. Elegant but complicated. I closed the book and tiptoed quietly away. Iain Rice’s “Locomotive Kit Chassis Construction” has a photo (page 48) of a 2-4-2 chassis with radial trucks at each end. That might be do-able and it might steer better than simple axles with sideways movement at each end. So here we go. As usual, I started with the rods. I used an Alan Gibson universal rods etch (4M92) and a little jig made from PCB and brass rod to make sure both rods were the same length. (If they’re not, game over) I’m going to try these radial truck etches from London Road Models. Received wisdom suggests that the chassis needs to be narrowed at each end to allow the trucks to do their thing. This usually means joggling the frames. On a kit with nice half-etched lines for folding, maybe. On a scratch build and in my hands, I could see disaster looming with the likelihood of chassis frames bent in all sorts of unhelpful directions. My solution is frames made up in 3 flat parts with the end sections overlapping and fastened inside the centre section. Even this was difficult enough to build straight. More jigs. OO chassis spacers for the centre section and narrower 10mm ones for the end sections. For the coupled wheels, one fixed axle and one with hornblocks. Poppy Woodtech chassis jig pulling its weight again. Remains to be seen if I can make this work. But nice to be back on the County Down Alan

Kadee couplings proved their worth over the weekend, allowing hands-free delayed uncoupling. Kadees.mov

Next time Patrick

Thanks David. There were a number of fine layouts at the show. Also, there's a distinct family atmosphere at 1st Bangor's shows and it was great to see so many children exhibiting their work. Very good for the future of the hobby.

The Stone Yard had its first public outing on 24 & 25 May at First Bangor Model Railway Club's exhibition. The layout has acquired trestles to sit on and a lighting rig to show off under. It survived being packed into the back of the car and performed impeccably throughout the 2 days. Phew! Many thanks to 1st Bangor MRC for their hospitality and for the opportunity to be part of a great show. Alan

A masterpiece. Just wonderful!

As far away from the controller as possible

Such a pointless act. Can only begin to imagine how the layout builders are feeling.

So very sorry to hear this. I never had an opportunity to meet Ken and knew him only through this forum but I always looked forward to reading his contributions and never failed to be inspired by his skill and the quality of his work. I will miss that. My sincere condolences to Ken's family. Alan

Thanks for sharing these pics Patrick. I was too preoccupied to notice you taking them, largely because, true to form, the moment a visitor showed up, the whole layout stopped working! (Later traced to a broken wire in the DCC track feed due to some pretty shoddy soldering. The culprit has been identified and spoken to. He blames the solder)

The Clogherhead stationmaster/traffic controller on a rare visit to Donaghadee station. Seen here propping up (being propped up by?) a fine Mourne granite pillar, one of three surviving which once supported the gates of the accommodation crossing at the old station throat.

A grand day out. Thanks Patrick

Unexpected arrival at Clogherhead earlier today. Patrick will explain imminently

The ex CSE (Carlow) Ruston at RPSI Whitehead, August 2020

Enjoy your Hornby 88DS. It looks like a nice model. I pre-ordered one from Hattons around the beginning of 2021. Hattons then cancelled the order, saying they were unable to fulfil it. I then pre-ordered one from Hornby directly in June 2021. I cancelled that order at the beginning of this year but in the meantime I'd build the Judith Edge kit so decided I didn't really need two. Forgot to mention above, it's built to OO gauge but looking at it, there's probably enough room to move the wheels out for the Irish gauge.

There's a 4mm etched kit for the Ruston 88DS in the Judith Edge Kits catalogue. It comes complete with wheels and a High Level 4wd gearbox. I built this one a couple of years ago.

There are those times when macramé, or jigsaw puzzles seem like a better choice of hobby but when things go well, railway modelling is unbeatable!

I had no intention of doing this today but I watched Patrick's video yesterday and well... here I was on the 0955 ex-Bangor. Bit of a party atmosphere at Great Victoria Street with tourists, film crews and the Translink choir singing "Ticket to Ride"!

Great stuff Patrick. One for the archives. Thank you!