BosKonay

The peco code 75 large points are pretty good yes.

They look fantastic!

1 - DCC runs with 'full' voltage AC to all of the track, all the time. Avoiding low voltage, etc. Track cleaning is still needed, but the high track voltage, means your focus is on driving the train, not the track 2 - Yes and no It depends on your current wiring and layout. Ideally you should have a DCC Bus, and feed all sections of the layout from it. You can't have enough feeds or droppers. 3 - Only if you are having running problems or use a lot of short wheel base locos (or older locos with less pickups than modern stuff) 4 - There are even USB controllers that simulate a full on loco Also the Digitrax Zephr

You'll find some details in teh resources section http://irishrailwaymodeller.com/content.php/354-buildings Admittedly I've not had time recently to finish off this section!

Pretty sure they were a one off 'special' edition but never say never!

Welcome to the site Noel! That's a lot of questions - I'd recommend the Lenz System or Ecos - 5A should be plenty - Most systems will now run from iphone and ipad apps, might not be rotary, but gives you a lot of flexibility and 'wifi' control (so no line of sight worries like with some of the older IR based systems) Some of the older models may not be DCC compatible, or may be too much work to get there, it all depends on how you want to run the layout, and the range of stock. Depending on the layout structure, you could even have some loops or lines run DC, while others run DCC

What a little cracker!!

Are you using the multi uploader here? You can stick up to 10 images up at once?

Hello Bill and welcome to the site! Lots of questions there! Generally, it's recommended to run a dropper every 3-5 feet (or roughly every length of flex track, or at worse, every other length for long straights). I also like dropping power directly onto the points for reliable running. On the programming switch, as long as the 'gizmo' fully isolates the track, it should make a good programming track. Third, yes, you can run the layout and all accessories on the same bus.

... and third!

The detail picked out and subtle weathering make this just perfect!!! Beautiful job, right down to the wiper!

Great video! Despite it all they still are great looking coaches too!

Might be a very very long wait

That paint finish is exquisite!

Nice price.

I've installed just over 40 of them so far so any questions let me know!

I'm a fan of DCC concepts cobalt digital motors. It's an all in one slow action motor with dcc on board and additional switch built in (to hook up indicator lights or a push button switch if you want) You just wire it up give it an address and control it with your regular dcc controller. Link to manufacturer http://www.dccconcepts.com/index_files/Cobalt_turnout_motor.htm They even sell a switch pack with LEDs and switches ready to go.

Hi Kevin! You're very welcome! Installing a chip in the woolwich is certainly doable. As you guessed space is very tight but there is no electrical issue.

Welcome back! Looking forward to updates!

I don't think I've ever seen a better looking set of the Es! And the little Deutz's!

Thread from back in 2012 related: http://irishrailwaymodeller.com/showthread.php/1103-Cable-Train-Esat-Cable-Train

An a big fan of parcel motel too. €3.95 to use any uk supplier that will post free to the UK

Ohhhh yesssss!!!!!

Ready to run :0 And quite perfect little things they are too!

Big envelope full of bits arrived this morning - the reefers look stunning!! Will try get some pics later!