spudfan

This morning in Derry, lower deck Craigavon bridge, lorry stuck against the top of the lower deck. The top deck is open (no top)so it would have been better to use that.

Stood up to make my speech at my daughter's wedding. Took out the sheet of paper from my pocket with the speech on it. Looked at it and...it was a list of stuff I wanted the mechanic to check on the car while in for a service. Yep, wrong sheet of paper. I had to wing it.

You could look at something like this. It would give inspiration and you could use it as a basis of your system. The added bonus is that it would list the parts you need. Regarding your "plan" above. I did something similar and worked off rough sketches like yours. The main thing is to work your ideas into the space you have. OO-9/HOe Setrack Planbook – PECO

Your layout, run what ever you want. That is the only justification you need. That is what I do and the world has not come to an end.

Trailer looks more aerodynamic now.

Either he did not see the height restriction sign or he he not know how tall the trailer was. A road in Lisburn was closed after a lorry collided with a rail bridge on Tuesday morning. The incident happened on the Lissue Road, which was blocked as a result. The railway bridge forms part of the Antrim–Lisburn line, which is currently disused.

I think I "voided" the warranty on the Mrs a long time ago....

Had Meccano myself in the 70s. Do not think I would have the dexterity in the fingers to do anything with it now.

From 1931 . 182 feet on one wind up for the loco! Regarding the ERECTOR. Imagine a parent's face when the son says,"I am going up to my room to play with my ERECTOR". Definately different times!

Hundreds of jobs at risk as Fastway parent company enters receivership Hundreds of jobs at risk as Fastway parent company enters receivership Looks like that business model was unsustainable. Pity the blokes who have loans out for their vans.

If you look at the advertisement for BDV, down in the left hand corner is a signal box. If you enlarge it you will see that has "steps, one arm signal and candle holder." Must be for the lighting. No fancy wiring in those days!

I can imagine the Santa letter!

Had not thought of water in the exhaust gases. Another one bites the dust!

Had an idea some years ago that I thought would aid a loco to start on wet rails. I saw an 071 with a loaded Tara train trying to get started on wet rails. The idea was to eliminate the problem i.e. the wet rails. I thought if a jet of compressed air was sent down a pipe to just in front of the wheel it would dry the piece of rail that would be used next. My first thought was to use the exhaust gases of which there is a copious amount and it would be warm too. However I decided that with todays Green agenda that would not be a runner. I remember being out in the snow in the work van and I stopped it to check the road ahead. When I got back I found that the hot exhaust had melted the snow behind it. This was the genises of my idea. I contacted various parties and Iarann roid Eireann did sent me a nice reply thanking me for my idea but their current systems were working fine. Just an idea. It would be cheap to install and maybe retrofit to older units if there was space inside for whatever gear was needed to get the system to work. Then again it might not work!

Not my shed. Tin and timbers have seen better days... Roof about to come off pieces of roof flying everywhere.mp4

4.30 pm. Getting rough out there! Candles at the ready

From September 2003.

Slightly off topic.Imagine if Guinness had reinstated some of their system. Tourist would love a trip in a Guinness train along the cobbles before they do an internal tour. I remember when I was young (very young) marvelling at the speed of the trains on the curves! The trains were always immaculate and looked a million miles away from the Bord na Mona stock. Transport has come a long way from CIE horse drawn carts and Guinness trains, but the memories are still vivid and happy.

To make them go further you can put a cardboard base or polystyrene insert into the wagons and put the load on top of that. That is what I do with the Foster Yeoman/ARC tipplers. Just put a piece of card with the flaps bent downwards and spread the load on that. Put some sticky stuff on the card to hold the load material. I made inserts for some of the wagons from polystyrene. I just cut a lump to fit the wagon, painted it grey and covered it with ballast while the paint was still wet. Looks fine....I am not a rivet counter!

Highly informative reading the above posts.

Maybe that was the reasoning behind the Foynes reopening. Longer tara trains, new unloading facilities......yeah wishful thinking!

It will be very easy to model a Tara mines train now. All you will need is a few Taras sitting in a siding.... If Tara mines lift the tracks at their site you will know they have abandoned rail.

Wonder if Tara mines were factoring in the upkeep of the fleet as a negative. The haulier will be responsible for the fleet of trucks and no doubt there are penalty clauses built into the contract if a speecific tonnage is not moved daily. I would say there would be little enough profit on the deal for the haulier if things do not go to plan for Tara mines.

Could also be used as a bargaining chip by Tara Mines. When the road haulage contract comes up for renewal they can ask IR to put in a tender and the road haulier to do the same.