Tullygrainey

It has been a quiet week at Kilmore...

Lovely work Paul. This is going to be good!

Is that Morecambe and Wise on the bridge?

Nice one Patrick

Glad to see the Countess behaving herself. Very best of luck with this project Patrick. I'm looking forward to seeing Capecastle 2 develop.

More work on rolling stock for Kilmore - some chassis for my resin cast BCDR vans and brake van. These are made from the core bits of some Alan Gibson etched brass wagon chassis kits adapted to fit inside the bodies. They're compensated with one fixed and one rocking axle. Painted black, they will do the work whilst being all but invisible behind the cosmetic outside W irons to be fitted onto the bodywork (see photo in 13 October post above). It works fine but it's just another of the compromises involved in modelling Irish stock in OO gauge. 4 wheels on my wagon(s)

Some press reactions to the "Nuns on the Run" incident... "Nuns' Fun Stuns Some!" The Sun "Holy Smoke! Nuns conduct the 4.45 service at Clogherhead" The Louth Examiner "Potential rail disaster averted by quick thinking, underpaid rail workers at Drogheda" National Railworkers' Union Bulletin "In the inadequate tuition given to these two courageous women, we see yet again the complacency, corruption and incompetence endemic to all male-dominated professions" Feminism Today "A riveting account of a convent's plucky determination to compete in the Belfast Marathon" Athletics Weekly (What? Of course I read it!)

I got it half right then

I want to create a Permanent Way formation for Kilmore so an unsuspecting Parkside kits LNER 12T LowFit wagon (Parkside PC66) which I built a few years ago was selected for butchery... Original brake gear and levers removed, then some fabricated W irons and bits of scrap brass etch added... Transfers from Railtec... Then some weathering and a suitable load.

Wonderful modelling all round. Beautifully neat work on the rodding too. Having wrestled with those Wills kits recently, I know what's involved. I'm still trying to get all the ends to stay joined up!

I know they survived the flight. Did they survive that thing?

Simple, practical and effective. Brilliant! I have dabbled with cassettes and never made anything I was entirely happy with. Could never decide how best to effect electrical continuity. Crocodile clips, bulldog clips, plugs and sockets, blah blah blah. Doing it through those protruding screws is genius!

Wonderful!

I'll need to get a log on for flickr in order to see those pics Paul. I'll have a look tomorrow. As regards material, either brass or n/s would be fine. Thickness would need to be sufficient for half etched rivets. I think the average for etched kits is around 15thou, in old money.

Ditching a layout, or any model you've spent time and effort building, is never easy David. I'm exceptionally bad at it. But I know that for you, like me, the pleasure is in the making and a new project will help ease the pain so best of luck with yours. I'll look forward to following its development.

That’s a very generous offer Paul. Will be in touch.

Me too Nelson!

Casting around for something to do at the weekend. I'll need a few more bits of rolling stock for Kilmore. I made these moulds from plasticard and brass masters a few years ago. The trick is to pour just the right amount of resin into the mould so it's fully filled but doesn't rise above the level of the top of the mould. I haven't mastered that yet so these castings need a lot of work with files before they can even be glued together to make a reasonably square wagon body. Provincial Wagons this ain't! Making the body is just the start. Chassis are the next challenge. In the past I've used hacked Dapol kit chassis and sprung etched brass kits from Brassmasters. In the case of the BCDR stock, outside W irons are an added hurdle. Currently, I'm using bits from MJT wagon compensation etches to make these but it's challenging, very time consuming and uses only a few modified bits of the etch and not in the way intended. Also, what's left of the etch isn't much use for anything. There must be an easier way! Alan

Brilliant stuff! Layout and stock all looking magnificent. Wish I could've been there.

Kilmore up.mov

I D spair of you lot

I picked up a second hand copy of Martyn Welch's book a while back, browsed it, put it on the shelf and forgot I had it. Must go back and read it properly!

Nice work Patrick!

I think for me that might remain a bridge not crossed

I've looked at CSB but I've yet to try it. I find it hard enough to fit a single compensation beam between the frames as it is. As well as getting it in the right place!