Weathering bench

[Dempsey]

On 17/6/2026 at 9:44 PM, popeye said:

Nice models and look great.

Much appreciated thanks.

[Dempsey]

C Class build.

Armed with lessons learned from adding custom details and learning the inner workings of model locomotives from my SD40 build i took on to build out a C Class from silver fox. Armed with etched parts from SSM work has officially begun. 

I've begun by cutting out all the vent on the sides to be replaced with etched grating. Below you can see a few photos along with an etched grating dry fitted in place.

Your thoughts as always are appreciated. 

Chris

[Patrick Davey]

'Twill be epic!

[popeye]

I have done one, still not finished and another not started.

Good luck.

[Mol_PMB]

Which engine variant are you building? In most cases I think that location would have a louvre panel rather than a grille.

Crossley (pic from Ernie):

Maybach (pic from Ernie):

EMD (pic from Jonathan Allen):

 

[Dempsey]

1 hour ago, Mol_PMB said:

Which engine variant are you building? In most cases I think that location would have a louvre panel rather than a grille.

Crossley (pic from Ernie):

Maybach (pic from Ernie):

EMD (pic from Jonathan Allen):

 

It will be the "EMD engine". It'll be modeled towards the tail end of service so it'll be looking quite worn out too. 

The grilles are more to create a little uniqueness.

Thank you for the reference pictures. 

Chris

 

[Dempsey]

C class update.

Progress continues. Openings on one side fully cut out and the grilles as below are dry fitted. Nothing will be glued until all cutting is complete. 

Your thoughts as always are appreciated. 

Chris.