GSR 800

Thats quite a few announcements, but they've said in terms of powered units, there can only B1, a? Took some gymnastics for that one but anyway

File the bearings on the outside of the gearbox flush? Might give you a bit more room, not sure if it'll cover the distance.

Isn't N quite expensive for it's size too? Really is more about the space available IMO. Weird that they've focused on getting the big express locomotives out (which makes sense) but the only shunters and smaller locos I can see are the 08s. I'm sure they'll add to the range shortly but surely a few smaller steam locos like panniers or jintys or something? Long as they don't produce the speed breaking 0-4-0s en masse.. At the same time I understand where Hornby is coming from, at 00 they are stuck with legacy couplers, very substandard controllers for sets and a lot of legacy moulds. I quite like the scale, which is quite ironic considering I've been thinking about moving into O gauge. Hornby 'leading' the charge into the scale though, meh.

In Dublin I see cyclelanes used quite often on the trek from drumcondra station up to uni, albeit this is a lane mainly on the footpath rather than the road, if that makes sense. Those bloody scooters are the menace there, but its certainly used. All the same I still see cyclists in front of the busses...right in the middle of the bus lane like.. As for cyclelanes, I've used the Mullingar-Athlone greenway a good bit and I can sum up traffic as follows Mullingar-Castletown: usually pretty busy with walkers, cyclists, runners, etc. Castletown-Streamstown-Moate: Usually totally deserted. Streamstown station has seen major renovation though, playground there I think. The bank is falling away in places on the trackside coming into Moate. Moate to Athlone: f*ck all once you're past Moate for miles, nobody at all until you pass the bridge carrying the main road into Athlone, then chock a block as you're going in. The recent extension with the tunnel was pretty underused in comparison. I found it a tortorously boring slog once past Moate. What you see is 'hubs' of activity from the big towns and villages for maybe a mile or so, and then you could go on for ages without seeing anyone else. AIT is right there as you go into Athlone, really can't see how the greenway is justified when put against the loss of the ability to reopen it for commuter traffic.

Don't try plucking it from the 1/1 scale version anyway...dangerous business.....

Pigs will fly. Sounds more like what you'd like to see. It'll be EMUs, something like the 800s in Britain. 071s and 201s will hold the roster for locos on freight, PW and departmental work for a good while, after that probably some standard electric loco to fill those roles.

Thats what the Battle of the Atlantic (and the Royal Navy generally) was for.

Just like the real ones They are not, it's that DJ is in the Canaries so he is looking at ebay espana. Your man selling is based in Swindon.

From storage at Mullingar.

Huge addition of excellent photos, including a great many of the last years of steam. Macha was under the spotlight for me, 20 new photos of her at Glanmire, Mallow and elsewhere in her last year.

Park Royal iirc, so theres a bit of room to say 'ah sure ye are buying all these coaches, do ye want this railbus while ye'r at it?' I could see her being used as an inspection car or something in her last years..

so it is a longer throw, more akin to a king or king arthur (spokes and webbing incorrect as mentioned)? And only 6'3? quite unusual, was always under the impression they were 6'6 or indeed 6'7.

Wonder what the throw of the likes of a GWR King would be? IIRC they have a solid spoke so unsuitable but still would be interesting to compare! Those forked joints in 00 gauge would be a sight to see! Regarding the valve spindle 'crosshead', I think it would be a beneficial addition for performance if you can get it to work, the wire that replaces it on the kit allows for too much slop imo. It may require a scratch build of the valve guides though as they lack the lip to guide the head as on the prototype.

Was Maedb not withdrawn earlier than that? She was sitting in Thurles stored in 1960. The timeline seems quite muddled after that, pictures often having wrong timestamps. The IRRS has a picture dated 1964 of Maedb and Macha tender to tender in Inchicore, both intact. Theres another picture dated 1962-3 with Macha cut down to the frames! Another has her boiler and firebox on an old tender chassis dated feb 1963 The locomotive in the photo is almost certainly Macha Interestingly here's a photo of one of the tenders at Inchicore, supposedly in 1959.. https://thetransportlibrary.co.uk/index.php?route=product/product&product_id=204476&search=CIE+Coras+Iompair+Eireann&page=4

the extra rods are a pain in the arse from my own experience, but I'm far from a master at that end of things. having mine motorised across the sea, might as well since the cost of buying motors and sending them across isn't worth it to me!

Indeed, but I've never heard of a single named shunter loco for Broadstone as billycan suggests. Theres also Jumbo, but I've mentioned that before.

While you're at it you should buy the 3D printed smokebox doors Ken made for me a while ago. Have them fitted to Maedbh and Macha

Well Sambo was a one off as far as I know, but there were shunters like the MGWR P's kicking around broadstone? Not sure if any kept their names into CIE years

Found it, November 2005 issue and its successor https://www.dropbox.com/s/mz86b7x52bf58oh/New Irish Lines - Vol. 4 No. 2 - 2005 November.pdf https://www.dropbox.com/s/7y7ar7ocv92l0aa/New Irish Lines - Vol. 4 No. 3 - 2006 May.pdf https://newirishlines.org/archive/

As said, focus was on railcars from the early. The north went so far as to have MPDs pulling freight! That is not to see the GNR wasn't looking towards diesels and even electrification, they had quite extensive plans for such but the funds did not allow it. I believe New Irish Lines had something on it, will have to dig it up. The MAK was a glimpse of these plans for diesel freight locomotives.

not bad, but the luggage vans were much more squat. Would certainly pass at any rate, though wouldn't be a bad scratchbuild either, the roof makes it easier anyway!

As said, railcar trailer used for luggage, were used on both broad and narrow gauge.

Time and neglect. Long time since the ballast or weedsprayer went as far as the sidings. The ballast is there, its just quite fine or ground down with time, for lack of a better term, mixed in with dirt, grime, soil and all kinds of other shite

Was looking at the Hornby catalogue there, they must be like those crypto lads thinking they'll go to the moon with the price of them. And thats in sterling mind you. The rehashed class 37s and the 'I can't believe it's not Lion' were noted. Perhaps a lawsuit down the line from Rapido.. the comments under the video can be summarised as 'look nice, but i won't be buying them at that price!'

Excellent, many thanks Bosko.