Past-Avenue Posted May 1 Posted May 1 (edited) Hi I will be attending the Wexford show this weekend with a good stock of all the stuff that I'm 3D printing. If you would like something put by please PM me thanks. Enda Edited May 1 by Past-Avenue 3
Westcorkrailway Posted May 1 Posted May 1 I’ll be heading down on Sunday with a Munster team in the car. Looking forward to seeing ye there
Warbonnet Posted May 1 Posted May 1 Hi folks, I will be there spreading the gospel according to Accurascale/IRM, and will have the 800, Hunslets, Park Royals, Bubbles and more on display over the weekend, so be sure to come by for a look. Please note that we will no longer be retailing at shows, and just promoting only, but of course everything is available in stock online or with traders at the show. See you then! Fran 7
Westcorkrailway Posted May 1 Posted May 1 2 hours ago, Warbonnet said: Hi folks, I will be there spreading the gospel according to Accurascale/IRM, and will have the 800, Hunslets, Park Royals, Bubbles and more on display over the weekend, so be sure to come by for a look. Please note that we will no longer be retailing at shows, and just promoting only, but of course everything is available in stock online or with traders at the show. See you then! Fran
Patrick Davey Posted May 1 Posted May 1 3 hours ago, Warbonnet said: Hi folks, I will be there spreading the gospel according to Accurascale/IRM, and will have the 800, Hunslets, Park Royals, Bubbles and more on display over the weekend, so be sure to come by for a look. Please note that we will no longer be retailing at shows, and just promoting only, but of course everything is available in stock online or with traders at the show. See you then! Fran I think I read on Facebook.....something about an announcement..........? 2
Warbonnet Posted May 1 Posted May 1 21 minutes ago, Patrick Davey said: I think I read on Facebook.....something about an announcement..........? tune in tomorrow morning, folks! 3 1
Patrick Davey Posted May 1 Posted May 1 18 minutes ago, Warbonnet said: tune in tomorrow morning, folks! Hup!
DJ Dangerous Posted May 1 Posted May 1 Let the speculation begin, while I run off and look for my last wishlist post to copy from… Jumbo Tar Wagons, or some sort of fuel wagons, Ammonias, Class 80 railcars, AEC railcars, or even Project 47. Dun dun duuuunnnnnnn! 2
Patrick Davey Posted May 1 Posted May 1 51 minutes ago, DJ Dangerous said: Let the speculation begin, while I run off and look for my last wishlist post to copy from… Jumbo Tar Wagons, or some sort of fuel wagons, Ammonias, Class 80 railcars, AEC railcars, or even Project 47. Dun dun duuuunnnnnnn! Probably something relatively small after the last announcement......
Flying Snail Posted May 1 Posted May 1 1 hour ago, Patrick Davey said: Probably something relatively small after the last announcement...... Anything will be relatively small compared to the last announcement (..... except maybe a 201, and MM has them covered) 1
Tractionman Posted May 1 Posted May 1 3 hours ago, DJ Dangerous said: Let the speculation begin, while I run off and look for my last wishlist post to copy from… Jumbo Tar Wagons, or some sort of fuel wagons, Ammonias, Class 80 railcars, AEC railcars, or even Project 47. Dun dun duuuunnnnnnn! I'd settle for a brake van 2
Patrick Davey Posted May 1 Posted May 1 33 minutes ago, Flying Snail said: Anything will be relatively small compared to the last announcement (..... except maybe a 201, and MM has them covered) 80 class would be nice though…… 1
John-r Posted May 1 Posted May 1 30 minutes ago, Tractionman said: I'd settle for a brake van Good call. 16 minutes ago, Patrick Davey said: 80 class would be nice though…… Another good call. 1
DJ Dangerous Posted May 2 Posted May 2 10 hours ago, Flying Snail said: Anything will be relatively small compared to the last announcement (..... except maybe a 201, and MM has them covered) Can’t go much smaller than Cement Bubbles… Unless you mean N Gauge?
Georgeconna Posted May 2 Posted May 2 (edited) hopefully a phone box or P&T Van or something small . At this stage I can't be adding another too 'Convenient' monthly payment up tbh. Edited May 2 by Georgeconna
Flying Snail Posted May 3 Posted May 3 On 2/5/2025 at 8:24 AM, DJ Dangerous said: Can’t go much smaller than Cement Bubbles… Unless you mean N Gauge? I forgot about the bubbles .. despite picking up a few packs. No, it was the 800s that I was thinking of. Now as for N ..... yes, please!
Past-Avenue Posted May 6 Author Posted May 6 Thanks to everyone who popped by over the weekend and had a chat and bought some goodies. I also got some new ideas for future projects to keep me busy. Thanks Enda 2
Patrick Davey Posted May 6 Posted May 6 Still loving my palvan @Past-Avenue - looking forward to seeing what you bring to us next Enda!! 1
Georgeconna Posted May 6 Posted May 6 Good overview of the show here with a cameo of yours truly @ 3.36 . my god I have aged. 4
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now