Kirley Posted December 19, 2014 Share Posted December 19, 2014 Knowledge is a wonderful thing, thanks Richie. Quote Link to comment Share on other sites More sharing options...
NIRCLASS80 Posted December 23, 2014 Share Posted December 23, 2014 Thanks to everyone for this guide and help, much appreciated. Here is my attempt on flickr. Quote Link to comment Share on other sites More sharing options...
enniscorthyman Posted December 23, 2014 Share Posted December 23, 2014 Thanks to everyone for this guide and help, much appreciated. Here is my attempt on flickr. Lovly job there, NIR Class 80. 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted December 23, 2014 Share Posted December 23, 2014 Very nice work, I have to get a few of them. Did you glue them together or solder? Quote Link to comment Share on other sites More sharing options...
Horsetan Posted December 23, 2014 Share Posted December 23, 2014 Can you go over that bit about metal dust again- you lick the dust right?????? If ye're Father Jack Hackett, sure ye're probably immune to the stuff anyway.... Quote Link to comment Share on other sites More sharing options...
NIRCLASS80 Posted December 24, 2014 Share Posted December 24, 2014 I just super glued mine together. Quote Link to comment Share on other sites More sharing options...
Jimbo325ci Posted February 28, 2015 Share Posted February 28, 2015 What do you guys use to stop the nut and bolt holding the bogie to the chassis from coming undone. I've found that it loosens quite quickly?! Quote Link to comment Share on other sites More sharing options...
Dave Posted February 28, 2015 Share Posted February 28, 2015 Maybe use some Threadlock? Quote Link to comment Share on other sites More sharing options...
Weshty Posted February 28, 2015 Share Posted February 28, 2015 Use the washer and a dab of superglue. Quote Link to comment Share on other sites More sharing options...
Jimbo325ci Posted March 1, 2015 Share Posted March 1, 2015 Thanks fellas! Will post pics when it's done! Quote Link to comment Share on other sites More sharing options...
Georgeconna Posted March 2, 2015 Share Posted March 2, 2015 clear Nailvarnish will do it the missus some. Quote Link to comment Share on other sites More sharing options...
Weshty Posted March 2, 2015 Share Posted March 2, 2015 clear Nailvarnish will do it the missus some. Tidy. Very tidy. Quote Link to comment Share on other sites More sharing options...
Jimbo325ci Posted March 8, 2015 Share Posted March 8, 2015 Another question for the experts - how do you secure the coupling hooks in place? Thanks Quote Link to comment Share on other sites More sharing options...
Kirley Posted March 8, 2015 Share Posted March 8, 2015 The easiest way I found was to drill a hole in a small piece of plasticard and used it as a backing plate for the coupling to go into and secured it with superglue. Need to make sure the plasticard is small enough for the coupling housing to go over it. Hope this makes sense. Quote Link to comment Share on other sites More sharing options...
Jimbo325ci Posted March 8, 2015 Share Posted March 8, 2015 The easiest way I found was to drill a hole in a small piece of plasticard and used it as a backing plate for the coupling to go into and secured it with superglue. Need to make sure the plasticard is small enough for the coupling housing to go over it. Hope this makes sense. Yes perfect sense. I was thinking along those lines but wanted to see what other ppl did. Thanks K Quote Link to comment Share on other sites More sharing options...
richrua Posted June 11, 2016 Share Posted June 11, 2016 Hi Weshty have you some 42 flat kits in stock ? I fancy a go. Quote Link to comment Share on other sites More sharing options...
Weshty Posted June 19, 2016 Share Posted June 19, 2016 Hi Richie (an to all) Several in stock and more on order Quote Link to comment Share on other sites More sharing options...
Noel Posted November 20, 2017 Share Posted November 20, 2017 Just discovered this superb instructional thread. Don't know how I missed it first time around. Richie's photo instructions are so good I could almost be converted brass!!! Very impressive and informative thread especially as it was the maestros first attempt at brass. Quote Link to comment Share on other sites More sharing options...
popeye Posted November 20, 2017 Share Posted November 20, 2017 I missed this too. Very useful for future builds. Quote Link to comment Share on other sites More sharing options...
Glenderg Posted November 20, 2017 Author Share Posted November 20, 2017 I suppose I could, now that I've bodged my way through brass assembly without burning the nads off meself, to do one with a soldering iron. Thankfully there's no need for Carrs Red/White/Purple, the greatest branding exercise I've ever seen. Some good solder, some flux, and an off the shelf iron is all that's required. I'll leave the resistance soldering and low melt solders to Professors David Holman and Eoin Murray, but I'd really like to see more lads have a go at the brass, it's really not that difficult at all. BTW, thanks for the kind comments, I missed having free time to do all of ^ . R,. Quote Link to comment Share on other sites More sharing options...
RedRich Posted November 20, 2017 Share Posted November 20, 2017 Soldering is a subject that some over complicate and it tends to turn people off. The choice of flux's is a whats good for one is poor for another. Like anything it takes a little practice, work on scrap brass and when you are comfortable move on to a basic kit in a few months you will be doing it with your eyes closed. Actually an electrician thought me and the first few attempts weren't the best ( and I am being kind to myself there ) but I got there in the end. Rich, Quote Link to comment Share on other sites More sharing options...
Glenderg Posted November 21, 2017 Author Share Posted November 21, 2017 Ha! One of the first days that I had the workshop set up in HQ, I dragged down two members of the squad - as Wrenn says - the guilty shall remain nameless. I explained the concept of trying to solder raw brass to raw brass. Bit of flux, same solder, and they were masters on first go. No ambulances called either. Most of the issues with Brass Kits is the nomenclature of the parts - "take the crankshaft that should align with the connecting rod, not the big end now (danger here) to the inner valve spring, and mount it to the Jannckers socket in the position it is normally found in" It's this kind of nonsense that puts the vast majority of kit builders off, myself included. I don't have a DeLorean to go back in time, nor a desire to do an apprenticeship in Inchicore, Broadstone, or Shildon. Imagine if the humble Airfix Typhoon/Sopwith Camel/Spitfire that many of us cut our teeth on, came with a typed wall of text, talking about intake manifolds and the like? We'd have thrown our hat at modelmaking years ago! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.