Glenderg Posted April 9, 2013 Share Posted April 9, 2013 Don't tell me I'm the only plonker who wants a Kit? Quote Link to comment Share on other sites More sharing options...
David Posted April 9, 2013 Author Share Posted April 9, 2013 Don't tell me I'm the only plonker who wants a Kit? Don't worry Richie! It's about a 50/50 split in this case. Maybe the fact that it's a loco makes a difference. Quote Link to comment Share on other sites More sharing options...
Glenderg Posted April 9, 2013 Share Posted April 9, 2013 Great news. I've never done a brass loco and am really looking forward to it. Would be nice to see how the other lads are gonna tackle it, particularly the non-soldering types. Any idea when the deposit is likely to be needed, it's just that I have a few trocaire boxes that need to be handed back and..... Richie. Quote Link to comment Share on other sites More sharing options...
David Posted April 9, 2013 Author Share Posted April 9, 2013 Great news. I've never done a brass loco and am really looking forward to it. Would be nice to see how the other lads are gonna tackle it, particularly the non-soldering types. Any idea when the deposit is likely to be needed, it's just that I have a few trocaire boxes that need to be handed back and..... Richie. Don't worry, it'll be designed so that even I can build it so you'll be grand! I'll be aiming to keep the required soldering to a minimum or maybe totally eliminated. There isn't one drop of solder in the De Dietrichs and they're almost totally brass! Actually I lied, the wiring is soldered but that's all. I've sent you a PM re deposit. Quote Link to comment Share on other sites More sharing options...
Warbonnet Posted April 9, 2013 Share Posted April 9, 2013 Don't tell me I'm the only plonker who wants a Kit? Nope, me too. We can start a support group to get each other through it. Quote Link to comment Share on other sites More sharing options...
Glenderg Posted April 9, 2013 Share Posted April 9, 2013 Nope, me too. We can start a support group to get each other through it. Meet in Marks' around the end of every month/week, at the American Kits box, then nip round to Ned's for a swift one? Sound like my kinda support group Quote Link to comment Share on other sites More sharing options...
Warbonnet Posted April 9, 2013 Share Posted April 9, 2013 Meet in Marks' around the end of every month/week, at the American Kits box, then nip round to Ned's for a swift one? Sound like my kinda support group We'll have enough scars from the soldering irons to fit into Neds nicely! Quote Link to comment Share on other sites More sharing options...
heirflick Posted April 9, 2013 Share Posted April 9, 2013 Nope, me too. We can start a support group to get each other through it. if you too lads keep at it ...i might try a kit version aswell! Quote Link to comment Share on other sites More sharing options...
David Posted April 9, 2013 Author Share Posted April 9, 2013 Richie now look what you've started! I'll have no model making work to do by the time kit-builders anonymous gets going Quote Link to comment Share on other sites More sharing options...
Flying Scotsman 4472 Posted April 10, 2013 Share Posted April 10, 2013 Richie now look what you've started! I'll have no model making work to do by the time kit-builders anonymous gets going Mines a built unpainted kit so that will keep you busy for a while Quote Link to comment Share on other sites More sharing options...
Mike 84C Posted April 11, 2013 Share Posted April 11, 2013 I"m with the kit builders on this one! I have only done white metal locos, thats showing me age! I think a support group is a good idea. David please pm me re deposit. Mike Quote Link to comment Share on other sites More sharing options...
Guest hidden-agenda Posted April 11, 2013 Share Posted April 11, 2013 It will be a very impressive kit judging by the kind of goods DK put out and hopefully a starter for more high quality kits in the future. Quote Link to comment Share on other sites More sharing options...
multivac Posted May 9, 2013 Share Posted May 9, 2013 PM sent to "David" Quote Link to comment Share on other sites More sharing options...
Kirley Posted August 12, 2013 Share Posted August 12, 2013 Any update on progress please? Quote Link to comment Share on other sites More sharing options...
David Posted August 12, 2013 Author Share Posted August 12, 2013 Any update on progress please? Hi Kieran, Still quite a long way off. There are a lot of De Dietrich and 2600 models to be built before I can really get some serious time into the project. Quote Link to comment Share on other sites More sharing options...
Kirley Posted August 12, 2013 Share Posted August 12, 2013 Thanks David, are you still on course to complete this year? Quote Link to comment Share on other sites More sharing options...
David Posted August 13, 2013 Author Share Posted August 13, 2013 Thanks David, are you still on course to complete this year? It's too early to say but at this stage I expect the project may run into early next year. Quote Link to comment Share on other sites More sharing options...
Kirley Posted August 13, 2013 Share Posted August 13, 2013 Hi guys, D&M Models are seriously considering producing a kit and RTR model of RPSI loco 461. If this requirement can be satisfied then there will be a model of 461 available this year. . Hopefully it will be in the early part of 2014 Quote Link to comment Share on other sites More sharing options...
Horsetan Posted November 30, 2013 Share Posted November 30, 2013 (edited) Most likely we will design the kit to run on an existing RTR chassis but we may also do an etched chassis. ...l. Please remember those of us who would be wanting to build it in 21mm gauge......with inside motion if possible! Don't tell me I'm the only plonker who wants a Kit? Nope, me too. We can start a support group to get each other through it. Make that three, but only if I can build the chassis to 21mm. Edited November 30, 2013 by Horsetan Quote Link to comment Share on other sites More sharing options...
Kirley Posted April 22, 2014 Share Posted April 22, 2014 Any update on the development of your 461 model please? Quote Link to comment Share on other sites More sharing options...
David Posted April 22, 2014 Author Share Posted April 22, 2014 Any update on the development of your 461 model please? Hi Kieran, The CAD is at an advanced stage but I still have to prioritise the current orders for Enterprise and Railcar sets so it's still a little way off. Please bear with me, I'm going as fast as I can. Quote Link to comment Share on other sites More sharing options...
heirflick Posted April 22, 2014 Share Posted April 22, 2014 Hi Kieran, The CAD is at an advanced stage but I still have to prioritise the current orders for Enterprise and Railcar sets so it's still a little way off. Please bear with me, I'm going as fast as I can. that gives us a bit of time to put the few quid aside for her!! Quote Link to comment Share on other sites More sharing options...
Kirley Posted April 22, 2014 Share Posted April 22, 2014 Thanks for the update but you can't fault me for wanting to get my hands on one as soon as possible. Quote Link to comment Share on other sites More sharing options...
jhb171achill Posted April 22, 2014 Share Posted April 22, 2014 Yes PLEASE! All grey GSR for me..... I've sent you a PM. Quote Link to comment Share on other sites More sharing options...
Horsetan Posted April 24, 2014 Share Posted April 24, 2014 ....The CAD is at an advanced stage ..... Even a sneak preview would get us salivating! Quote Link to comment Share on other sites More sharing options...
David Posted April 24, 2014 Author Share Posted April 24, 2014 Even a sneak preview would get us salivating! Yuk! I'm afraid it's all construction lines in multiple layers so it wont look like much. You'll have to wait until an assembled example is ready before any pictures will be posted Quote Link to comment Share on other sites More sharing options...
Warbonnet Posted April 24, 2014 Share Posted April 24, 2014 Yuk! I'm afraid it's all construction lines in multiple layers so it wont look like much. You'll have to wait until an assembled example is ready before any pictures will be posted Looking forward David. And if you can organise an etched plate for the number on the sides it would be mega! Quote Link to comment Share on other sites More sharing options...
David Posted April 24, 2014 Author Share Posted April 24, 2014 Looking forward David. And if you can organise an etched plate for the number on the sides it would be mega! Will do! By the way guys, if any of you have some input, either in the form of photos, drawings or information if be delighted if you could contribute. You can post on this thread or send me an email. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
GSR 800 Posted January 29, 2016 Share Posted January 29, 2016 Any news on this? Quote Link to comment Share on other sites More sharing options...
Horsetan Posted January 29, 2016 Share Posted January 29, 2016 I haven't heard anything. IThere must be other things going on. Quote Link to comment Share on other sites More sharing options...
David Posted January 30, 2016 Author Share Posted January 30, 2016 The CAD is now complete and I'll be looking at getting some test etches done shortly. I only anticipate minimal amendments will be required once I get my hands on the test etches. I'm aware that it is taking a lot longer than originally planned but unfortunately progress through remaining orders for railcars and DDs is extremely slow due to overtime at the day job that cannot be avoided. Apologies for this. I know it's frustrating for you guys! Quote Link to comment Share on other sites More sharing options...
GSR 800 Posted January 30, 2016 Share Posted January 30, 2016 Hmmm I like it! Any CAD sneak peeks? Quote Link to comment Share on other sites More sharing options...
Kirley Posted January 30, 2016 Share Posted January 30, 2016 Great news David that the project has advanced to this stage, 2016 release a possibility? Quote Link to comment Share on other sites More sharing options...
Horsetan Posted February 1, 2016 Share Posted February 1, 2016 Good to know. Quote Link to comment Share on other sites More sharing options...
Kirley Posted May 27, 2016 Share Posted May 27, 2016 The CAD is now complete and I'll be looking at getting some test etches done shortly. I only anticipate minimal amendments will be required once I get my hands on the test etches. I'm aware that it is taking a lot longer than originally planned but unfortunately progress through remaining orders for railcars and DDs is extremely slow due to overtime at the day job that cannot be avoided. Apologies for this. I know it's frustrating for you guys! Any chance of a view of the CAD, just to give us something to hang on to? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.