Jump to content

British locos and stock that can be disguised as Irish

Rate this topic


Westcorkrailway

Recommended Posts

3 minutes ago, Westcorkrailway said:

I’ll start with the obvious ones 

SECR N class- MGWR K class

LMS jinty- NCC Jinty

LMS compound- V class 

Adams radial-BCDR tanks 

jubilee class-GSR 800 class

 

EA73D376-AB7A-4C7D-98FF-3ABAD97ECB5E.thumb.jpeg.74ff307f347f05fe29c8e3e05696a3eb.jpeg

my example of GSR 479 made from an Adams radial 

In fact once you remove the cylinder, this loco could become many Irish prototypes 

Fowler 2-6-4t - NCC WT class

Dean goods- J15

 

 

 

 

  • Like 5
Link to comment
Share on other sites

2 hours ago, jhb171achill said:

BR Mk. 1 full parcels brake = CIE “BR” genny van 

Plus of course, numerous Mk 2 & Mk 3 carriages….

MK3 and MK4 coach -Irish mark iv coach (DVT had no realistic option)

hattons genisis coaches have similarities to designs over here, I’m sure @jhb171achill can elaborate on which ones 

obviously a lot of early CIE wagons have parallels to BR wagons 

GSR/CIE Pullman cars perhaps

SR schools class - GNR VS class


 

 

Edited by Westcorkrailway
Link to comment
Share on other sites

1 hour ago, Westcorkrailway said:

MK3 and MK4 coach -Irish mark iv coach (DVT had no realistic option)

hattons genisis coaches have similarities to designs over here, I’m sure @jhb171achill can elaborate on which ones 

obviously a lot of early CIE wagons have parallels to BR wagons 

GSR/CIE Pullman cars perhaps

SR schools class - GNR VS class


 

 

The GSR Pullman cars were a bit like De Dietrichs, 800 or the Fintona tram in that they were specific in their use and location. There were just four, and only one per train. One each was on the up and down day mails between Dublin and Cork, and Dublin & Galway. So you’re going to need Bredins and GSWR wooden stock to run with them, with a “Maedb” or a 400 or possibly a Woolwich up front. 

But yes, in theory, 2-foot rule, just repaint green. Also they had different window spacing, different ends, and matchboard lower panelling.

Ive an idea they had different bogies too, though I’d need to check that.

  • Like 1
Link to comment
Share on other sites

The NER/LNER J72 0-6-0T “Joem “ are very close dimensionally to the MGWR E / GSR J26 “Bat”, which lasted long, and got out into odd corners.

If you cut a foot off the back of a GWR 2251 0-6-0, the chassis is a good match for the MGWR L / GSR J18/19, although the superstructure will need a lot of work.

  • Like 4
  • Informative 2
Link to comment
Share on other sites

There are a number of British 0.6.0s which with little more than perhaps replacing the cab with something "Inchicore-looking" could pass off as a "generic" Irish loco.

Bear in mind, if modelling is based on a "three foot rule", that the best locos for a scenario like this will almost certainly be tender 0.6.0s. yes, the LNER J72 can indeed look very MGWR "E" class - just drop it into a pot of grey paint!

Many 4.4.0s also will look "half-Irish" if painted blue for GNR or grey for GSR / CIE. I have seen posts here and there of some very nice conversions of 2.6.0s or 4.6.0s into Irish versions.

  • Like 2
Link to comment
Share on other sites

35 minutes ago, Northroader said:

The NER/LNER J72 0-6-0T “Joem “ are very close dimensionally to the MGWR E / GSR J26 “Bat”, which lasted long, and got out into odd corners.

If you cut a foot off the back of a GWR 2251 0-6-0, the chassis is a good match for the MGWR L / GSR J18/19, although the superstructure will need a lot of work.

9E4A5C24-CB0D-49C4-AAF7-DD163E5F7D81.jpeg.7ad5b70bbb4ef0f5e3a6f7444bec012d.jpeg
Disguised J26 (J72) 

2E7DF63E-4F7E-4EB6-AB26-1AFC6698CE4C.jpeg.d2b9a33631bbb1680996b183eebd754f.jpegMore accurate model of J26

these were a very universal machine making it to small lines like Courtmacsherry, Tramore and fenit. So if you wanted to make a shunting layout of a terminus on a small branch, these would be the job. SSM also make a kit for these locos

  • Like 2
Link to comment
Share on other sites

While not to the taste of all (what livery is?), a "generic" repaint of a British loco as an Irish one will look more convincing if it is in the grey - as black can simply look like unlined BR! If BR had painted their engines grey instead of black and put big pale yellow numbers on them, it would be the other way round.....

  • Like 1
Link to comment
Share on other sites

28 minutes ago, jhb171achill said:

While not to the taste of all (what livery is?), a "generic" repaint of a British loco as an Irish one will look more convincing if it is in the grey - as black can simply look like unlined BR! If BR had painted their engines grey instead of black and put big pale yellow numbers on them, it would be the other way round.....

In this particular case, the modeller  is not a fan of GSR/CIE grey…hence why black was chosen. He still has not come round to putting transfers on! 

  • Like 2
Link to comment
Share on other sites

Lima BSK = CIE BR Mk1 GSV with some kit bashing

GSV3185_Steps_123.jpg

Hornby BR Mk3 = IR/IE Mk3 (sort of)

mk3_respray02.jpg

Bachmann GWR Ventilated Vans = CIE exGSWR Vans

IMG_5704.jpg

Dapol GWR Vent Vans = CIE Vans

IMG_5269.jpg

Hornby/Tri-Ang GWR Toad Brake van = exGSWR brake van (some poetic license)

IMG_6010.JPG

Edited by Noel
  • Like 10
  • Informative 1
  • WOW! 1
Link to comment
Share on other sites

2 hours ago, DoctorPan said:

Image

 

Hornby LMS Railroad coaches look Bredin esque to cover the 2ft rule.

I've two of these in LMS livery.

They are indeed a good "2-ft rule" approximation for Bredins or CIE 1951-3 series, or even some sort of broadly generic "laminate", but by simply repainting the silver roof dark grey and deleting the letters "LMS" from the sides, you've actually exact GSR livery they had as new, correct lining and all; at that time the GSR, LMS and NCC used the same maroon and even had identical lining (NCC latterly less or no lining).

So I'm holding the two I have for eventual use as weathered "Bredins" still in GSR livery, once I've enough six wheelers in the older green to surround them with, for a late 1940s or early-1950s version of operating. (Need more ancient-design wagons and two more steam locos as well).

  • Like 4
  • Informative 1
Link to comment
Share on other sites

3 hours ago, jhb171achill said:

I've two of these in LMS livery.

They are indeed a good "2-ft rule" approximation for Bredins or CIE 1951-3 series, or even some sort of broadly generic "laminate", but by simply repainting the silver roof dark grey and deleting the letters "LMS" from the sides, you've actually exact GSR livery they had as new, correct lining and all; at that time the GSR, LMS and NCC used the same maroon and even had identical lining (NCC latterly less or no lining).

So I'm holding the two I have for eventual use as weathered "Bredins" still in GSR livery, once I've enough six wheelers in the older green to surround them with, for a late 1940s or early-1950s version of operating. (Need more ancient-design wagons and two more steam locos as well).

So there is a chance we will see very rare GSR era snaps of Dugort harbour someday?!

 

I’m waiting for hattons genesis coaches come out, and if there as good as they look, I’ll paint them in post 1955 CIE green

  • Like 1
Link to comment
Share on other sites

4 hours ago, jhb171achill said:

I've two of these in LMS livery.

They are indeed a good "2-ft rule" approximation for Bredins or CIE 1951-3 series, or even some sort of broadly generic "laminate", but by simply repainting the silver roof dark grey and deleting the letters "LMS" from the sides, you've actually exact GSR livery they had as new, correct lining and all; at that time the GSR, LMS and NCC used the same maroon and even had identical lining (NCC latterly less or no lining).

So I'm holding the two I have for eventual use as weathered "Bredins" still in GSR livery, once I've enough six wheelers in the older green to surround them with, for a late 1940s or early-1950s version of operating. (Need more ancient-design wagons and two more steam locos as well).

Yeah, they look good in GSR guise as well

20220130_213900.jpg

  • Like 3
Link to comment
Share on other sites

The DSER had some LNWR-built 2-4-2Ts, I think of Webb design. Curiously at least one of them was subsequently regauged to 4'8.5 and ended up in a colliery in GB. 

I don't know if there's a kit (doubt RTR?) for that type but someone will know I'm sure.

Edited by Niles
  • Like 2
Link to comment
Share on other sites

35 minutes ago, Niles said:

The DSER had some LNWR-built 2-4-2Ts, I think of Webb design. Curiously at least one of them was subsequently regauged to 4'8.5 and ended up in a colliery in GB. 

I don't know if there's a kit (doubt RTR?) for that type but someone will know I'm sure.

Aye, the DSER bought 6 of them in 1902, London Road Models make a kit of them (as well as, incidentally, the 'Special Tanks' of the same design as used on the Dundalk Newry and Greenore Rly)

CRAMLINGTON COAL CO. - 14 - Webb LNWR Class 71 2-4-2T - built 1883 by Crewe Works as L:NWR No.2496 - 1902 withdrawn, regauged & sold to Dublin & South Eastern Railway as No.61 EARL OF WICKLOW - 1917 sold to Cramlington Coal Co., regauged, as No.14 - 1929 scrapped.

 

  • Like 4
  • Informative 1
Link to comment
Share on other sites

39 minutes ago, Niles said:

The DSER had some LNWR-built 2-4-2Ts, I think of Webb design. Curiously at least one of them was subsequently regauged to 4'8.5 and ended up in a colliery in GB. 

I don't know if there's a kit (doubt RTR?) for that type but someone will know I'm sure.

The 6 ex-LNWR 4'6" 2-4-2Ts did not last too long in their original condition on the DSER one No64 was re-built with a new boiler and cylinders in 1914, the remaining 5 were returned to the UK during WW1 mainly for industrial use.

Apart from the small driving wheels and side tanks the re-built No64/427 resembled a DSER rather than a Webb loco with a high pitched boiler, DSER cab, boiler fittings.

Ironically Robinson's pair of WLWR 2-4-2T 13 & 14 look similar to the LNWR 5'6" 2-4-2T, both 13 & 14 survived into the mid 1930s with relatively minor modification as 267 and 491. The GSWR sold  13 (GSWR 266) to the Cork Macroom Direct in the early 1900s, following the amalgamation the loco grouped with CMDR rather than the  GSWR locos and received a different class designation (F5) to 266 Inchacore apparently forgetting that the two locos were nearly identical.

Class F5 - 491 - Cork and Macroom Direct Railway 2-4-2T - built 1891 by Vulcan Foundry, Works No.1315. as WLWR No.13 DERRY CASTLE - 1901 to GSWR as No.266 - 1914 sold to CMDR as No.6 - 1925 to GSR as Class F5 No.491 - 1934 withdrawn.

GEM produced whitemetal kits of both the Webb 4'6" and 5'6" 2-4-2T the 5'6" would be a reasonable choice for a rtr model potentially available in LNWR, LMS and British Railways schemes

  • Like 5
Link to comment
Share on other sites

  • 1 month later...
On 31/1/2022 at 9:04 PM, Westcorkrailway said:

So there is a chance we will see very rare GSR era snaps of Dugort …..

Once I get everything 1955-65 up’n’running, the next stage is a world of grey steam engines (in somewhat cleaner state than CIE had them!) and a mix of maroon and darker green carriages to depict 1945-49.

Hence my continual whinging about six-wheelers!

I have high hopes for the Genesis coaches from Hattons….

We now have the excellent KMCE Models producing the sort of ancient goods stock in common use in GSR days (and later). Provincial Leslie does the GSWR guards van, so we’re sorted!

Once someone does a RTR 6w chassis, turf wagons can be made up out of just about any oul junk in the spare bits box….

  • Like 4
Link to comment
Share on other sites

10 hours ago, jhb171achill said:

Once I get everything 1955-65 up’n’running, the next stage is a world of grey steam engines (in somewhat cleaner state than CIE had them!) and a mix of maroon and darker green carriages to depict 1945-49.

Hence my continual whinging about six-wheelers!

I have high hopes for the Genesis coaches from Hattons….

We now have the excellent KMCE Models producing the sort of ancient goods stock in common use in GSR days (and later). Provincial Leslie does the GSWR guards van, so we’re sorted!

Once someone does a RTR 6w chassis, turf wagons can be made up out of just about any oul junk in the spare bits box….

84322802-8137-471D-A3E2-8614DD772DC2.jpeg.0701ed565051d30f884d57e7c667c062.jpeg
if anyone feels like bodging a few 6 wheelers be my guest!


I more then likely will be getting genesis coaches of some description, and many of us will. I don’t think many will be trying to make one of these Emergency era……wagons?

  • Like 5
Link to comment
Share on other sites

35 minutes ago, Westcorkrailway said:

84322802-8137-471D-A3E2-8614DD772DC2.jpeg.0701ed565051d30f884d57e7c667c062.jpeg
if anyone feels like bodging a few 6 wheelers be my guest!


I more then likely will be getting genesis coaches of some description, and many of us will. I don’t think many will be trying to make one of these Emergency era……wagons?

@jhb171achillwould still prefer travelling in one of those to an ICR….

  • Like 2
  • Funny 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use