Irishrailwayman Posted March 25, 2016 Posted March 25, 2016 Nice job. I must get around to assembling mine for Ballybeg... Quote
craven1508 Posted March 25, 2016 Posted March 25, 2016 they are nice , have 2 sets myself, sadly they are being culled for automated versions! Quote
JasonB Posted March 26, 2016 Author Posted March 26, 2016 Cheers lads,thanks for the comments as always. Quote
JasonB Posted May 7, 2016 Author Posted May 7, 2016 This is one of my Bachmann ballast wagons which I resprayed a while back to use with my NIR locos.Im not sure why but I had this in general chat at the time so I thought id stick it up on this thread instead,reason being I'm going to make a start on the remaining wagons that I never bothered to finish back then.Even though ive put a bit of work into weathering the interior I think I'll add a ballast load to each as well instead of running them empty. Quote
GSR 800 Posted May 7, 2016 Posted May 7, 2016 Looks fantastic Jason, really like the rust effect. Quote
JasonB Posted May 8, 2016 Author Posted May 8, 2016 Brilliant work! Absolutely superb. Thanks alot Nelson. Quote
JasonB Posted May 8, 2016 Author Posted May 8, 2016 Looks fantastic Jason, really like the rust effect. Cheers Harry,thanks for the positive comments as always Quote
DiveController Posted May 9, 2016 Posted May 9, 2016 That rust looks so good, I wouldn't 'spoil' it with a load of ballast. Nice job! Quote
Weshty Posted May 9, 2016 Posted May 9, 2016 Agreed, the inside of that wagon is verisimilitude at its finest. Quote
JasonB Posted May 10, 2016 Author Posted May 10, 2016 That rust looks so good, I wouldn't 'spoil' it with a load of ballast. Nice job! Lovely work Jason, the rust looks so real. Agreed, the inside of that wagon is verisimilitude at its finest. Thanks lads much appreciated:tumbsup: Quote
JasonB Posted May 27, 2016 Author Posted May 27, 2016 Haven't managed to get much work done on the wagons the last few weeks but here's the progress so far.All have had a couple of coats of yellow and while doing that I've taken the chance to give some a rougher finish than others,the reason for that will be further down the line.I've been in two minds about adding the ballast load especially after the positive comments on how well the rust looked in the first wagon.So what I decided to do was add a load to one of the freshly painted wagons and weather it just above and below that ballast line.By doing this it would just be a matter of digging it back out and weathering the whole interior instead if I decided not to keep it in.Now that its dried and hardened I'm liking how it looks so I,ll continue on weathering and filling the rest.Once their all done I can make a start on finishing touches. Quote
popeye Posted May 29, 2016 Posted May 29, 2016 Very nice work,they can look good full or empty. Quote
JasonB Posted May 31, 2016 Author Posted May 31, 2016 Very nice work,they can look good full or empty. Thanks popeye:tumbsup:As you say they are a nice wagon, I'm looking forward to getting them finished and get them running. Quote
JasonB Posted July 15, 2016 Author Posted July 15, 2016 Been a bit busy of late with one thing and another but ive eventually got the Bachmann seacows finished.Ive also started on a Hornby one as well to make up a rake of seven which was in and around the norm I think.As with the autoballasters I worked on previously ive done a bit of work to change the colour of the load because I wasn't happy with how it looked at all and Ive also given them a bit of a weathering so they all don't look identical. Quote
33lima Posted July 15, 2016 Posted July 15, 2016 (edited) Very nice! A rake of three might have been enough, though... Edited July 15, 2016 by 33lima Quote
popeye Posted July 17, 2016 Posted July 17, 2016 Very nice Jason, they look great and the graffiti is good,not too much. Quote
JasonB Posted July 17, 2016 Author Posted July 17, 2016 Thanks for the comments lads,yes Lima going by that photo I think I've got myself two rakes now:) Quote
JasonB Posted July 17, 2016 Author Posted July 17, 2016 Very nice Jason, they look great and the graffiti is good,not too much. Cheers Popeye,the graffiti was more an experiment than anything else,it took was awful lot of cutting masking tape and too much time cleaning an airbrush,think it will be decals next time! Quote
Railer Posted July 17, 2016 Posted July 17, 2016 Thanks for the comments lads,yes Lima going by that photo I think I've got myself two rakes now:) 3 rakes.... Quote
jhb171achill Posted July 17, 2016 Posted July 17, 2016 For authenticity, yes, three is good - you'd only occasionally get more! Quote
JasonB Posted July 17, 2016 Author Posted July 17, 2016 3 rakes.... Lovely photo Railer,i didn't think id see less than 3.Looks like I'm selling some of these Quote
JasonB Posted July 30, 2016 Author Posted July 30, 2016 Next job on the list is my MK2 EGV.I know it has been discussed at length here previously regarding the finish of this model so I won't go into it again myself.The reason its on the bench is,when it was released first time around in the IE livery I was slow off the mark to pick one up,and when I did eventually go looking I couldn't get one anywhere.The general opinion from what Ive read seems to be that you can get away with using this because its closer to IE orange rather than Supertrain so I had this in mind when I bought it.Anyway i'll give it a shot and see how it goes. Quote
JasonB Posted August 20, 2016 Author Posted August 20, 2016 Quick update on the progress so far.The roof and both ends have been sprayed black and I've also added the decals to sort the small bit of detail needed on both ends too. Quote
JasonB Posted August 21, 2016 Author Posted August 21, 2016 Cheers Dave.Once the white lining is added to what's already done it should make a big difference to the appearance.Thanks for looking and commenting as always,much appreciated Quote
Jimbo325ci Posted August 21, 2016 Posted August 21, 2016 Looks good Jason. Should look the job once the lining is on it. Quote
JasonB Posted August 21, 2016 Author Posted August 21, 2016 Looks good Jason. Should look the job once the lining is on it. It should do Jimbo,thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.