Leaderboard

More to follow this week, folks….

1960's today. CIE 1964-06-xx Drogheda A11 yj340. CIE 1961-06-04 Dublin Amiens St 170 yj308. CIE 1960-07-09 Bagnealstown 184 yj307. CIE 1961-05-xx Killarney A33 yj309.

Unboxed Class 110 No.112 “Northern Counties” and gave it an outing. Cheers Darius

Hi folks, I'm engaging in a long overdue clear out of Irish and UK material. Below are the Irish items. I'll do a separate post for the UK material. All asking prices are in euro and exclude postage. I am based in Galway but I can arrange for items to be collected in Dublin between now and Christmas. Cash on collection or payment via Paypal if posting. Will update below as buyers come forward. Locomotives: MM7078 Class 071 IE Grey 7078 - 300 - Buyer MM0078 Class 071 IE or/blk 078 - 280 - Buyer MM0077 Class 071 IE or/blk 077 - 280 - Buyer MM0082 Class 071 IE Blk/Sil 082 - 250 - Buyer MM0085 Class 071 IE Orange 085 - 250 - Buyer MM0080 Class 071 IR or/blk 080 - 250 - Buyer MM0073 Class 071 IR or/blk 073 - 250 - Buyer MM0088 Class 071 CIE Supertrain 088 - 200 - Buyer All have been test run only and have not been run in. The first 7 are smooth and silent runners. MM0088 is one of two MM0088s I have - both were smooth but relatively noisy runners out of the box - relatively speaking as 071s are very quiet runners in general. I use the 2nd one with DCC Sound so it doesn't bother me and I'm hanging on to that one. Coaches: MM5202 CIE MkII Std - 55 - Buyer MM5224 CIE MkII Std - 55 - Buyer MM5102 CIE MkII 1st - 55 - Buyer MM5152 CIE MkII Comp - 55 - Buyer MM5223 CIE MkII Std - 55 - Buyer MM5201 CIE MkII Std - 55 - Buyer MM5151 CIE MkII Composite - 55 - Buyer MM5101 CIE MkII 1st - 55 - Buyer MM5604 CIE MKII EGV - 65 - Buyer MM5403 CIE MkII Diner - 65 - Buyer All of the above have been little used and half never run at all since they were purchased. A post on the UK material will follow on Wed. I'll be offline most of Tues so apologies if I don't get back on any PMs until Wed.

Some painting, lining and decals today for the Bredin Parcels/Luggage Van and the Corridor. The window frames are a pain in the arse to paint! I'm thinking of painting the other side of these in the later light green to have "more" coaches for little effort!

No.111 “Great Northern” joins the party. Cheers Darius

Won’t matter as they are brass so you’ll have to paint it yourself anyway - is not like the card preprinted kits. I have made up a J26 and 2 MGW coaches. Straightforward as David says / they are also designed for 32mm primarily rather than 36.75, and most of my building heartache came from the 5’3 bit!

I havn't been able to do much work on the layout this year, however I recently acquired a Rapido Highland Railway Jones Goods which I photographed for the records and took the opportunity to run a ballast headed by 192. I have done a little work on the scenery for the extension to the left of the bridge but I'm not really up for it at the moment. Roll on 2026!

I've been trying to resist that temptation David. Kilmore needs some attention to get it properly operational, I have half finished wagons that need doing and other bits of rolling stock I'd like to have a go at. But then again....

A few years ago I constructed a small terminus based loosely on Wick/Thurso in H0 scale. Set c1970 in the BR green/blue transition era. Baseboard is an Ikea Lack 110cm x 26cm shelf with a thin ply display box surround. Peco code 75 track, structures all scratchbuilt using a lot od Slaters embossed sheet and plasticard. Locos are 3D prints from Lincoln Locos on modded Roco mechanisms, stock is reworked ancient Lima, Fleischmann and Rivarossi rtr, plus some scratchbuilds. Featured in the March 2025 Railway Modeller, Dounreay has been exhibited around a dozen times so far. The choice of H0 scale was deliberate to encourage/force myself to do more modelling!

Yesterday I went to the O gauge show in Wigan, which was worth a visit for the number of small traders, and an opportunity to browse the Squires stall at leisure without a crowd. I stocked up on quite a lot of scenic items and a few tools. There were also some very nice small layouts, and I was able to take inspiration from the way they were presented. I particularly liked this one, which (albeit in O gauge) is similar in size and composition to my Quartertown Mill: Today I have made some progress on the layout backscene and the mill building. The layout now has some painted birch tree trunks (still awaiting foliage). In front of these will be some homemade sea moss trees (which I'm also working on) and then in the foreground I'll use the Primo trees. So there will be a gradual progression in quality. The old mill now has a roof and a few other details. It's nearly there now, still a few details to add and some more weathering. And of course the canopy which will mostly hide the lower (whitewashed) part. This building is going to be partly hidden behind others, perhaps I've put too much effort into it? But I've enjoyed making it. Here it is placed in situ:

Hi folks, We're a little behind on our update which will now come next week, but here is something for the weekend.... Honestly, you DO NOT want to miss out on these! Cheers! Fran

Airfix 1/48 Hurricane completed . Oct 7th 1940, Battle of Britain was nearing its climate, Pilot Officer Ken McKenzie (born in Belfast) of 501 Sqn, after expending all his ammo, he used his wingtip to knock the tail plane of a Me.109 causing it to crash into the sea. The RAF pilot made a forced landing near Dover. McKenzie eventually shot down 13 German Aircraft and was shot down in 1941, pretending to be mad was repatriated to England in 3 years later he died on 200 aged 92. Awarded the DFC he was a true hero.

Thanks - first effort at lining a loco! Hopefully some day it will appear at a show alongside Mr Hs! . @Northroadermade one too, so there’s a few about!

0-4-2 tank, a rare type in Ireland, tender versions were common enough in the 19thC The WLWR did however have a very handsome example

I came up with a system to make these, glass and lead. I made a couple of hundred in the 90s. This is the original prototype that I made for myself, around 1990, as I didn't fancy this getting full of dust. That's a 1/48th, so the case is about 210 x 180 x 90mm.

Delighted to hear of this! If modelling a line which would have been operated like the Achill branch, it's a diet entirely of 4.4.0 D16s 1903-1925, an a mix of these and "foreign" 4.4.0s after that. The odd G2 2.4.0 crept in there too. In its very earliest period (1895-1901) the G2 2.4.0s (MGWR "D" class) and also their "E" class (GSR J26) 0.6.0T. The Clifden line probably had the least variety of motive power of any line in steam days; in early days the 2.4.0s, but quite quickly replaced by J18 0.6.0s, which would be the sole power on the line after that. However, imagine this; your line is actually a GSWR one, from maybe Tuam or ballyglunin, heading through Headford and Cong to the other end of the Maam Valley. That gives you an excuse to use GSWR stock, which was more varied and plentiful! Bearing in mind Galteemore's comments about four-wheeled locos and their layout-wandering quirks, and the availability of the Hattons 6-wheelers (which are close to a GSWR design) and 00 Works J15s, as well as Provincial Leslie's GSWR brake vans, perhaps a scenario like this might be an idea? As it happens, this is precisely what's behind my own Dugort Harbour. There is a real Dugort - it's a small village on the north side of Achill Island, and at one stage there was a vague proposal to extend the Achill branch across Achill Sound (on what would have been quite a spectacular bridge over a narrow bit of sea containing a quite vicious sea current). It was my original intention that the layout was to be based on this extension as it might have been. With no JM Design 2.4.0 G2 as yet on the scene at that time (as I would have bought 3 or 4!) but various British 0.6.0s available which I could butcher into a vague equivalent of a J15, I thought I'd switch it to West Kerry, wher you'd lines like Valentia and Kenmare and Newmarket which rarely saw anything but J15s. I had also considered a Tuam - Headford or Tuam - Cong branch. Had such a thing been built, it would have been originall WLWR, then GSWR. So several interesting scenarios there. I'm a great fan of both detailed models of actual locations and "might-have-beens". Wandering off-topic, a thing I am more adept at than actually doing anything about it, two other "might-have-beens" which i had seriously considered were both based on the Achill line; in one, it survives into the diesel era with B141s on all trains; in another it was nrrow gauge, survives to the modern era, and becomes a happoy stamping ground for F class diesels, a transferred Dingle 6T after the C&L closed, Walker railcars and so on..........

Some of you may know of my GWR UK outline O gauge layout "Buffers Lock". I have detailed the story of it's build and exhibition life elsewhere on irm.com (see: Buffers Lock). Basically, this is a 16.5 feet long exhibition layout with a scenic area of 8.5 feet by 26.5 inches. Two four foot long fiddle-yards (three lines each) feed trains from either end allowing through trains to be run. One fiddle-yard is a traverser and the other is a train turntable. Originally the electrical set up was DCC to run trains and the point motors/semaphore signals. The "brick" outline station building, signal box, goods shed and other fittings are all typical of GWR practice. The backscene is of a UK village in the middle distance (Ross-on-Wye I believe). I have now started a project to develop the layout to allow for alternating use as an Irish outline layout. To accomodate a variety of rolling stock that might become available, I have rewired the layout to be easily changed from DCC to DC use with Double-Pole Double-Throw switches. DCC control will continue to use the Roco/Fleischmann's Z21 system while DC power is now supplied by a Morley Controller Vanguard Zero One unit delivering 2.5 Amps per track. In either mode the signals and point motors will be controlled by DCC. In time, I am working to have suitable alternate buildings developed with a "stone" outline matching actual Irish prototypes. These will fit directly in place of the GWR outline buildings when running in irish outline mode. CK Prints (Enda Byrne) has developed Irish outline brake vans in flying snail grey and roundal brown versions. Enda plans to produce other Irish outline wagons in time including beet and other wagons. Alphagraphix have a range of MGWR outline locomotives and passenger carriages available in metal kits which are worth considering. Once the layout is further developed, I plan to invite other modellers to run their Irish O gauge rolling stock on this layout perhaps attending exhibitions together as a joint venture. The alternate layout has been named "Maam Road" translated in Irish to "Bóthar an Mháma" (which means the road to the mountain pass). Many rural irish railways had stations some distance from the towns they served and so had the "road" designation. My idea is to situate the layout somewhere in the West of Ireland within a wild mountain landscape similar to those the Clifden or Achill lines ran through. There was a station at Maam Cross/An Teach Dóite but my layout is not intended as a copy of that station. I have mounted a suitable backscene on new boards (to alternate with the existing "Buffers Lock" backscene). I attach a few photos to show what the scene looks like without buildings.

HI All The Next batch of C Rail OO 40ft Hc containers are almost finished . Maersks new all Blue livery and a run of MSC 40ft hcs in Sand Regards Arran

A few photos taken outdoors in overcast daylight: And indoors but with a brief glimpse of sunlight (dark lines are shadows from window bars) Compared to the photos in artificial light there’s a massive difference to the appearance of the sky. This was in artificial light: I suppose the real test will come when I have got the layout’s own lighting installed. That’s a long way off!

Sounds like a particularly incompetent murderer talking to defence brief !

I saw these photos on the news/social media. Horrible to see the signal cabin go up in flames and sending best wishes to the great volunteers at Maam Cross. No doubt they will build back better, and a horrible day like today will be nothing more than a memory in the not-too-distant future. https://www.dailystar.co.uk/news/latest-news/breaking-horror-fire-engulfs-entire-36397136 You can donate on the Connemara Railway Project Gofundme page.

Savage prices compared to what they go for on eBay, @declan64! Can’t see them hanging around too long. And, if that’s just the clearout stuff, I can’t imagine what the actual collection is like.

The Alphagraphix J26 is pretty simple, especially the chassis. It's a single etch, so you just solder in the wheel bearings before folding up the sides and folding down the frame spacers. No alignment jobs required. I've built two and you can have a rolling chassis in a couple of hours. Very satisfying and very effective.

I actually bought a ready to run, 0 gauge engine this week - a rare occurrence for me. indeed, had to look up my journals to see when the last time was. Turns out that was in 2010 & even then it was a couple of Bachmann Brassworks models [08 shunter and Derby Lightweight DMU], which required painting and detailing, so certainly not rtr in the accepted sense. The same year, I also bought a couple of Shays, one a two truck 0n16.5, the other an HO three truck and these were fully finished. Otherwise, have to back to the 1980s and everything else has since been kit or scratch built - a total of 75 locos to date. So, you ask, what is it that prompted this extravagance? Well, it's about as small as it gets in 0 gauge: a Heljan Ruston 48 DS and very dinky it is too. Needs work, as far too clean for my liking, while also crew and [eventually] AJ couplings. The version I've bought fits in with the aim of there being a dairy on my new project and the Ruston fits the bill nicely as I already have three six wheel milk tanks, one [a Slaters kit] in full Express Dairy livery. A bit more work has been done on the layout, with the station master's house now well under way. The 'chassis' is mounting board, covered with Howard Scenics embossed brick paper. Back in the last century, I used to paint all the bricks individually, until sanity prevailed when I realised I could do it far quicker with water colour pencil crayons. Windows will be from York Models.

Built on yet another Ikea Lack 110cm x 26cm shelf, this is my Czech TT:120 micro layout. 'New Town on Lack' is set in the north of the Czech Republic circa 2010 and was inspired by an eventful railtour I did with a group of friends pre-Covid. Track is all Kühn (now part of Roco's range), structures and details are Czech kits. Locos are rtr, stock a mix of rtr and kits - the Czech modeller is very well-supported by their cottage industry, particularly in TT:120. Nové Město was featured in the October 2022 issue of Continental Modeller.

This pic just appeared on Fn which may help your plans

Sligo, Leitrim & Northern Counties Railway today. SLNC 1957-09-26 Dromahair, 'Enniskillen' shunting 11.15 S-E goods. PFF037. SLNC 1957-09-26 Collooney lkg West. PFF036. SLNC 1957-09-26 Belcoo 'Enniskillen' 11.15 mixed S - E. PFF048. SLNC 1957-09-26 Glenfarne 11.15 S-E gds shunted to allow 2A to pass. PFF041.

The last market day before Christmas, 1957. On a bleak December morning, Thursday 19th December 1957, an “A” class replaces the usual J15 on the morning passenger train, which has an extra coach on today. An influx of dealers had the pubs in Castletown busy last night. Here it is seen crossing a badly flooded Carrowmore Bog about 8 in the morning, halfway down the Dugort Harbour extension line.

Messing about some more with the Retro vibe. Some Freight movements and some ECS getting ready for the weekends pilgrims.

Roger's 7mm scale kits feature a one piece etched chassis. Have mentioned before that you solder in the bearings, then simply fold the sides and spacers. They are designed for 32mm gauge, so you fit the top hat bearings inside out for broad gauge. Never had any problems with clearances for splashers and other bodywork, so presume things should be ok in 4mm. However, if there are no castings, what you will get is the same as with Worsley Works, so that means sourcing or making everything from chimney, dome, buffers, cab details, whistle tender axle boxes, brake standard, etc, etc. Without wanting to rain on anyone's parade, finding such things is a lot harder now than it was ten or even 20 years ago, when there were many more whitemetal and brass castings available, though 3D printed options may be possible now.

Nickle silver basically a superior material to work, basically stronger, easier to solder and easier to paint compared to brass. Best contact Des on availability, Studio Scale models traditionally held kits in stock though may have shifted to supplying kits to order. Des supplied tender etchs and castings at relatively short notice for a GSWR 52 Class 4-4-0 I produced several years ago.

An important point to check with Roger is whether a 4mm loco chassis produced from 7mm artwork/photo tooling will be suitable for a OO gauge loco. The width over chassis on a 4mm loco produced from re-sized 7mm/Gauge 0 artwork may be too wide for OO. Alternatives would be: (a) to re-design the existing chassis so that its suitable for OO gauge (width over frames 12mm) or (b) the buyer purchasing proprietary etched or turned frame spacers and assembling the chassis as a conventional chassis. Although my 4mm MGW vans were designed to be assembled to OO or 21mm gauge, it was necessary to re-design the chassis when I re-scaled the artwork to 2mm scale for a customer.

@Adrian bolton You may be able to buy a standard base board in Marks Models if they still have them in stock, if you are going for non standard to fit into the attic you would need to know your track plan and build the boards to suit. Marks Models used to stock these helpful booklets, which could give you an idea on how to proceed;- Give them a call to see if they are in stock? There is also a wide range of books online which are very helpful, some helpful members on here should have more recommendations. Eoin

Good luck @Irishrailwayman with your "re-purposing" of your layout. When I have time, I'll wind everyone up with pictures of Portadown Jct with GERMAN (think of a German Class 50 on a goods at Richhill!) and Southern Railway rolling stock (all electric of course!). Back to the real Thread. The little E Class should serve you very well. Reference has been made by @Galteemore to his build of one - and very nice it is too - that's downstairs in my Railway Room on "Rosses Point" (on 36.75mm track!). Then there's @Northroader's one (on 32mm track). I must place that in the engine shed and take a photie! Almost as bad as pre-Major General Pasley's Big Decision - I have TWO Irish gauges within a couple of feet of each other (and on the SAME railway company!). .......

184 will look great when finished. The paint on it is based on a swatch taken from No. 90, which is in turn based on a swatch taken from a model in the Science Museum in London that has original GSWR paint. Always nice to see some inter-society cooperation! We are almost at the point where every 5'3" Irish steam loco will be in restored condition apart from Lough Erne

184 the day I visited whitehead a few months ago, boiler cladding being re-applied.

https://www.railwaygazette.com/traction-and-rolling-stock/electro-diesel-stadler-flirt-trains-selected-to-renew-dublin-belfast-enterprise-fleet/70100.article It seems like the contract's been signed now. (It'll be a right mess if CAF win their case after this point, as far as I know the stay on the contract signature was lifted, but the case wasn't thrown out.) It's a Flirt variant, running on the Dart's wires and on diesel the rest of the time. Some small batteries are included for short movements. There will be toilets and provision for catering is given. Delivery scheduled for 2028, in service from 2030.

A photo of No.90 in Albert quay on the 31st of March 1961 as the last Ex-Cork Leaves for Bantry. (Brian Baker)

The class 44 works a trans pennine express from Newcastle to Liverpool through Ashburton grove.

Thanks to @past avenue for supplying the name boards which were recently installed on Tara junction.

Hmmmm indeed. I have many such "safe places", wherein dwell model railway stuff, one set of house keys, an IR£4 winning lotto ticket, two sets of car keys, at least one mobile phone, an expensive jacket, a practically unused 10-day CIE runabout ticket from summer 1979 and gawd only knows what else. Trouble is, they are VERY safe. VERY safe indeed.

Ernie’s Railway Archive on Flickr. I can do you 74 at Enniskillen in 7mm scale !

Real master class in turning out an operationally effective, scenically delightful layout in a reasonable space. Very nicely done. Care is required though…

More 80 class madness – a bubble, an A class, a 141 and G617. And shunting steam engine No. 90 into the shed. It can’t shunt in the rain right now as the rear end is a bit exposed

Adrian, I am sure there are plenty on here who would tell you who not to go to. But I am saying nothing

2 in maam cross

Thanks. My Irish H0 micro will be in a similar theme, more curved and 10cm longer and wider. I need to get that thread started.

BCDR No.2 went wandering last week, passing through Coleraine before eventually arriving at Ardglass. The passengers were surprised. They thought they were going to Ballynahinch. With thanks to @colmflanagan for this opportunity to exercise No.2 on his excellent Ballycrochan Line. No 2.mov