SSM brakevan

[scahalane]

Super job, great idea to represent the felt roof.

[Kirley]

Excellent work Mike and thanks for the detailed commentary on what you did and the materials used. I believe getting the roof right is key to a successful build. Lots of useful information.

[Dunluce Castle]

Wonderful job on that van, love the weathering

[Mike 84C]

Thanks for all the positive comments guys, glad you like the van.

Nelson, the weathering is Carrs rust and mud dry powders; another first for me! and I also used Micro Marks Window glaze, it looks very much like pva adhesive when wet but dries clear. But it worked very well.

What I didnt say, was that I glued the roof to the Evergreen strip that was Acc"d to the curve of the roof.

Mike

[Glenderg]

Very nice work on the van Mike, the roof treatment is a cracking idea.

 

I'm not familiar with solvaset, but I reckon that a coat of sealer/varnish should be enough to blend the surface of the model with the lip of the decal so that the weathering powders don't catch on the decal in future. Perhaps a thinned coat of the grey airbrushed on around the outside of the decal would soften the edge, holding a bit of card over the numbers and let the overspray do it's thing? R.

[Mike 84C]

Thanks for that idea Glenderg I"ll give it a go! i must admit to using the weathering powder before sealing the finish. Even tried a bit of abrasion with the fiberglass pen which did not work! Thats when I got into the "thats as good as it gets attitude!" But will try the light overspray with some light grey.

Mike

[jhb171achill]

I missed this! Truly excellent model, right shade of grey and very realistic weathering. Superb.

[Horsetan]

SSM also do the GNRI brake van, which is nice....

[Rialto]

I have been working on the SSM model and am near to finished. Has anyone run these models, I am not sure if it has enough weight. It's my first brass kit and I used supper-glue to build it. Should I add a weight inside the van?

The models above are superb, and great encouragement for us with less experience.

Leo.

[Andy Cundick]

Simple answer is no,i've got two and both run nicely.Andy.

[Noel]

  Rialto said:

I have been working on the SSM model and am near to finished. Has anyone run these models, I am not sure if it has enough weight. It's my first brass kit and I used supper-glue to build it. Should I add a weight inside the van?

The models above are superb, and great encouragement for us with less experience.

Leo.

 

I have the SSM kit and looking forward to making it when I get the time.

[Colin R]

one thing I would add to the list when using a glassfibre brush is a pair of fine neoprene car mechanics disposable gloves, it stops the glassfibre getting into the skin (you normally get 50 pairs to the box) DIY chains do them if you can't find them anywhere else.

 

Colin

[Colin_McLeod]

I'm coming late into this thread but I am looking for one of these brake van kits. Are they still available?

[DartStation]

  On 26/11/2021 at 11:06 AM, Colin_McLeod said:

I'm coming late into this thread but I am looking for one of these brake van kits. Are they still available?

Expand  

You would need to check the SSM website : Studio Scale Models Freight models (studio-scale-models.com) to confirm or email Des if he still has them in stock.  

 

 

[Colin_McLeod]

Thanks. E mail sent.

 

[the Bandon tank]

Des does not seem to respond to e-mails any more. I wanted to buy some bits and pieces and sent him a couple of e-mails about a month ago. No answer. A pity.

[JasonB]

  On 27/11/2021 at 8:18 PM, the Bandon tank said:

Des does not seem to respond to e-mails any more. I wanted to buy some bits and pieces and sent him a couple of e-mails about a month ago. No answer. A pity.

Expand  

Recieved an order from Des just last week. SSM is still operating as normal.  

[DiveController]

@the Bandon tankHe usually responds on dezsullivan@gmail.com

Things may be slightly off with COVID. I'd try him again

[Mike 84C]

Des can be a bit slow responding to emails, can you maybe phone him?. The SSM kits I have built, the CIE brake van and the Bandon Tank go together very well, just take your time and understand what you are going to do. I always try to solder metal kits, only resort to glue as a last resort!

[the Bandon tank]

Glad to hear he is still doing business,I will contact him again, as I have have ordered various bits of him down the years.

[jhb171achill]

  On 27/11/2021 at 8:18 PM, the Bandon tank said:

Des does not seem to respond to e-mails any more. I wanted to buy some bits and pieces and sent him a couple of e-mails about a month ago. No answer. A pity.

Expand  

Last time I got anything from him I wrote to him, and got the relevant stuff promptly.

[DartStation]

  On 27/11/2021 at 8:18 PM, the Bandon tank said:

Des does not seem to respond to e-mails any more. I wanted to buy some bits and pieces and sent him a couple of e-mails about a month ago. No answer. A pity.

Expand  

his eircom.net email changed to gmail.com- that's why 

Edited November 30, 2021 by DartStation

[the Bandon tank]

Thanks for that information.

[minister_for_hardship]

  On 30/11/2021 at 1:43 PM, DartStation said:

his eircom.net email changed to gmail.com- that's why 

Expand  

Tried gmail address. No reply either.

[irishthump]

  On 7/12/2021 at 10:57 AM, minister_for_hardship said:

Tried gmail address. No reply either.

Expand  

Des can be a little slow replying sometimes, but he’ll get back to you.

[DartStation]

  On 7/12/2021 at 10:57 AM, minister_for_hardship said:

Tried gmail address. No reply either.

Expand  

Des has a day job too so please be patient , it may be a while before he responds 

Edited December 10, 2021 by DartStation

[Westcorkrailway]

Aye, dez has been very good to me. He might take a second to respond.

[DoctorPan]

Likewise, Des was quite sound to me too, knocked up some GSR crests and lining transfers for me without any fuss.

[Railway Lyons]

Des has always been a gent to purchase from. Might take day or 2 to get back, but always prompt enough and accommodating to any order I have placed. Always gave me updates on orders and when posted. Cannot fault him.

[jhb171achill]

  On 9/12/2021 at 10:29 PM, Railway Lyons said:

Des has always been a gent to purchase from. Might take day or 2 to get back, but always prompt enough and accommodating to any order I have placed. Always gave me updates on orders and when posted. Cannot fault him.

Expand  

Likewise with me - very helpful. 

[Colin_McLeod]

  On 26/11/2021 at 11:06 AM, Colin_McLeod said:

I'm coming late into this thread but I am looking for one of these brake van kits. Are they still available?

Expand  

 

  On 26/11/2021 at 11:51 AM, DartStation said:

You would need to check the SSM website : Studio Scale Models Freight models (studio-scale-models.com) to confirm or email Des if he still has them in stock.  

 

 

Expand  

 

  On 26/11/2021 at 1:23 PM, Colin_McLeod said:

Thanks. E mail sent.

 

Expand  

Got a prompt reply to my e mail. Order placed and kit received. Now the ball is in my court to build it.

 

Thanks for pointing me in the right direction.