Warbonnet Posted October 23, 2018 Posted October 23, 2018 Hi everyone, As the big Dublin show is only a few days away, I thought it would be good to put together some details about what you can expect from IRM this weekend. We are delighted to be able to sponsor the show, our first show to do so as we look to support our local clubs and their shows every year which take great planning, dedication and hard work. We will have a slightly scaled down version of our new exhibition stand at the show, in the main hall towards the back. On it we will be on hand to sell cement bubbles, show you samples of plough vans and Taras, some items for our forthcoming project 42 range as well as Accurascale stock and samples on sale and view. On top of that, we will be taking pre-orders on Taras, Ploughs and our forthcoming container liners, which will be in limited numbers. You can read about that via the link below: And finally, we will have TWO all new model announcements at the show at 11am on Saturday. One item will have a pre-production sample on hand, the other will be CAD only, but will give you a view of what we have coming after the 42ft flat project. So, make sure you drop by, say hi, and see what we have coming your way. We look forward to seeing you there! Cheers, Fran 8
mmie353 Posted October 23, 2018 Posted October 23, 2018 HI Fran, When will it be on the website on the new model announcements? Sorry but due to location, I will not be able to attend. Thanks, Mark 1
Warbonnet Posted October 23, 2018 Author Posted October 23, 2018 24 minutes ago, mmie353 said: HI Fran, When will it be on the website on the new model announcements? Sorry but due to location, I will not be able to attend. Thanks, Mark Hi Mark, We will have it up on the site at the same time, so about 11am. cheers, Fran 2
ttc0169 Posted October 23, 2018 Posted October 23, 2018 Looking forward to meeting you all on Saturday. 2
Warbonnet Posted October 24, 2018 Author Posted October 24, 2018 One of the two items we are announcing this weekend. There's something off with the picture though, seems a bit blurred?? See you all on Saturday!
Noel Posted October 24, 2018 Posted October 24, 2018 21 minutes ago, Warbonnet said: One of the two items we are announcing this weekend. There's something off with the picture though, seems a bit blurred?? See you all on Saturday! My eyesight used to be 20/20 but now its only 22/00 Difficult to tell from that picture. Have you checked the AF-S on the DSLR, or perhaps you had the ISO dialled up a little high say over 128,000? For APS-C perhaps you might consider upgrading to a D500 or at worst a D7500 to make fotograf we can see. FF wastes too much disk space and leaves no room for TLAs. 4
Broithe Posted October 24, 2018 Posted October 24, 2018 Sometimes, when things are a bit indistinct, it can help if you take your glasses off and relax your vision. Try it. I did and I can see SFA. 3
Garfield Posted October 24, 2018 Posted October 24, 2018 Spoiler alert! A further hint here: https://media.giphy.com/media/LwzCyTYWVNMPwznqzi/giphy.mp4 1 5
Speedy Posted October 25, 2018 Posted October 25, 2018 On 10/24/2018 at 4:36 PM, Warbonnet said: One of the two items we are announcing this weekend. There's something off with the picture though, seems a bit blurred?? See you all on Saturday! You're doing a Minecraft Special Edition???? 3
Georgeconna Posted October 26, 2018 Posted October 26, 2018 Easy: Tis a 3D Figure Rendition of Fran and Patrick that you can paint yourself and stick in the cabs of the locos. 2 per pack but buy 3 packs get one for €0.50. 3
KMCE Posted October 26, 2018 Posted October 26, 2018 On 10/24/2018 at 11:49 PM, Garfield said: Spoiler alert! I was considering a scratchbuild of that loco, but if you guys are proposing a RTR version, i shall direct my efforts elsewhere and wait for your creation with anticipation. 2
Railer Posted October 26, 2018 Posted October 26, 2018 Floor plan for tomorrow. IMG_1540549162652.pdf 2 1
Warbonnet Posted October 26, 2018 Author Posted October 26, 2018 Yeah, I meant to ask for this weekend off and all. Damn..... Stop by stand A folks, news bulletin at 11! 3
jhb171achill Posted October 26, 2018 Posted October 26, 2018 On 10/24/2018 at 4:36 PM, Warbonnet said: One of the two items we are announcing this weekend. There's something off with the picture though, seems a bit blurred?? See you all on Saturday! It’s upside down. 2
Georgeconna Posted October 26, 2018 Posted October 26, 2018 Just heard the Marathon will be on this Sunday which mean the city centre will be a no go area between certain times. Pain in the ar$e that now as I normally trundle down the Quays then to Clontarf and up to the school in the AM.
Warbonnet Posted October 26, 2018 Author Posted October 26, 2018 5 hours ago, Georgeconna said: Just heard the Marathon will be on this Sunday which mean the city centre will be a no go area between certain times. Pain in the ar$e that now as I normally trundle down the Quays then to Clontarf and up to the school in the AM. M50 best bet George!
jhb171achill Posted October 26, 2018 Posted October 26, 2018 M50 it is from southside..... those marathons (and cycle races!) are a scourge! On 10/24/2018 at 11:49 PM, Garfield said: Spoiler alert! A further hint here: https://media.giphy.com/media/LwzCyTYWVNMPwznqzi/giphy.mp4 Wowwww!
Irishswissernie Posted October 27, 2018 Posted October 27, 2018 I can't get to Raheny today as there is no Public Transport from Haltwhistle to Dublin. However I am going to Newsham, Blyth Show which is the biggest event in Newsham with a footfall of at least 25 per day (Hang on people have 2 feet so that's 50 per day!) I will have no internet either so my Container Flat order will have to wait a few days, hopefully there will be a 5 pack left then. Looking forward to reading the 11am proclamation when I return this evening. Ernie 1
Broithe Posted October 27, 2018 Posted October 27, 2018 On 10/24/2018 at 5:47 PM, iarnrod said: That's A Class photo, IRM. Gold Star for observation skills! 2
Railer Posted October 27, 2018 Posted October 27, 2018 They didn't get allocated stand A for nothing.... 2 1
KMCE Posted October 31, 2018 Posted October 31, 2018 On 10/26/2018 at 9:27 AM, KMCE said: I was considering a scratchbuild of that loco, but if you guys are proposing a RTR version, i shall direct my efforts elsewhere and wait for your creation with anticipation. Alas, the RTR version was not to be, however I can fully understand the reluctance to work on a model of this complexity. So it looks like I will have to scratch build one myself after all! I've made a start, but I think there will be considerable time required to complete this model to the highest standards. The finish is a bit stark, however I'm hoping with suitable weathering it will blend down to a more pleasing finish. More as time permits!! 6
Warbonnet Posted October 31, 2018 Author Posted October 31, 2018 On 10/29/2018 at 8:20 PM, chris said: what the photo unpixelated then? 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now