Robert Shrives Posted March 1, 2023 Share Posted March 1, 2023 Crikey a real works back roader ! good luck on the rebuild. Robert 2 Quote Link to comment Share on other sites More sharing options...
Georgeconna Posted March 1, 2023 Share Posted March 1, 2023 Jesus that some slap. good luck!! 2 Quote Link to comment Share on other sites More sharing options...
popeye Posted March 1, 2023 Share Posted March 1, 2023 Did it fall from a plane? You might be able to get some new parts from IRM. And lots of weathering could hide any bad damage. good luck. 2 Quote Link to comment Share on other sites More sharing options...
Broithe Posted March 1, 2023 Share Posted March 1, 2023 We await the RAIU report... 1 1 Quote Link to comment Share on other sites More sharing options...
Tullygrainey Posted March 1, 2023 Share Posted March 1, 2023 That's heartbreaking. Best of luck with the rebuild. 3 Quote Link to comment Share on other sites More sharing options...
murphaph Posted March 1, 2023 Author Share Posted March 1, 2023 37 minutes ago, popeye said: You might be able to get some new parts from IRM. DJ is going to ask the lads if there are any spares available. That would obviously be the ideal solution. Heavy weathering might be a good idea alright. 2 1 Quote Link to comment Share on other sites More sharing options...
Noel Posted March 1, 2023 Share Posted March 1, 2023 Unfortunate luck luck. No better modeller to put humpty dumpty together again. 3 1 Quote Link to comment Share on other sites More sharing options...
John-r Posted March 1, 2023 Share Posted March 1, 2023 That's really bad luck Philip, but as the lads have already said , no better man to do a good job on it. 1 1 Quote Link to comment Share on other sites More sharing options...
the Bandon tank Posted March 1, 2023 Share Posted March 1, 2023 Every confidence in your skills Philip, good luck with the rebuild, that was a horrible thing to happen. 1 1 Quote Link to comment Share on other sites More sharing options...
jhb171achill Posted March 1, 2023 Share Posted March 1, 2023 If your rebuilding skills are anything like your weathering skills, it will end up better than when it left the IRM factory! 2 2 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 4, 2023 Share Posted March 4, 2023 On 1/3/2023 at 5:00 PM, popeye said: Did it fall from a plane? You might be able to get some new parts from IRM. And lots of weathering could hide any bad damage. good luck. Already checked with IRM and they have no spares available at all, for anything other than warranty repairs - which this very obviously isn't! 1 Quote Link to comment Share on other sites More sharing options...
Horsetan Posted March 4, 2023 Share Posted March 4, 2023 3 hours ago, DJ Dangerous said: Already checked with IRM and they have no spares available at all, for anything other than warranty repairs - which this very obviously isn't! That's a write-off, then. Would be good source of spares, though..... Quote Link to comment Share on other sites More sharing options...
jhb171achill Posted March 4, 2023 Share Posted March 4, 2023 3 hours ago, Horsetan said: That's a write-off, then. Would be good source of spares, though..... Actually, good thinking - just like the real thing. Even back to steam days, many a loco yard had a few ancient "cripples" in it, which were periodically raided in order to retrieve a spare part - and then there's today's "real" 201s! A bit of ingenuity and you could at least make a few shekels selling bits on fleabay........ though I agree with others, if anyone can fix it you can! 1 Quote Link to comment Share on other sites More sharing options...
Flying Snail Posted March 4, 2023 Share Posted March 4, 2023 That makes for sad reading: I'm sure it sucks for both DJ and you right now. Having seen the attention to detail you have with your work on the 111s, I'm sure you'll be able to do something to get her back on the rails! 1 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 4, 2023 Share Posted March 4, 2023 8 hours ago, Horsetan said: That's a write-off, then. Would be good source of spares, though..... That's exactly what IRM said! I find your lack of faith disturbing, and theirs. If anybody can work their magic on 048, it's @murphaph! 1 1 Quote Link to comment Share on other sites More sharing options...
murphaph Posted March 4, 2023 Author Share Posted March 4, 2023 The crack to the body is going to have to be hidden under weathering. The missing wiper can't be hidden unfortunately and as DJ says IRM don't have any spares like that or none available to the public at least so she shall remain wiperless on that side. I am sure some wipers broke off on the prototype. The main thing is she is back together and running again. I had to completely remove the main PCB to get in at the worm gears etc. There wasn't enough slack in the pickup wires to push the PCB to one side in this case so I had to desolder the pickups as well as the motor leads and lift the PCB + cab interiors out and off the chassis. The cab interiors sit firmly but will release with a bit of wiggling. They are an awful lot easier to strip down than the MM locos it has to be said. The missing horn has since been located and glued back on by the way Next job will be to weather it "extensively" at the wish of its owner so don't blame me 4 6 Quote Link to comment Share on other sites More sharing options...
Gabhal Luimnigh Posted March 4, 2023 Share Posted March 4, 2023 3 minutes ago, murphaph said: The crack to the body is going to have to be hidden under weathering. The missing wiper can't be hidden unfortunately and as DJ says IRM don't have any spares like that or none available to the public at least so she shall remain wiperless on that side. I am sure some wipers broke off on the prototype. The main thing is she is back together and running again. I had to completely remove the main PCB to get in at the worm gears etc. There wasn't enough slack in the pickup wires to push the PCB to one side in this case so I had to desolder the pickups as well as the motor leads and lift the PCB + cab interiors out and off the chassis. The cab interiors sit firmly but will release with a bit of wiggling. They are an awful lot easier to strip down than the MM locos it has to be said. The missing horn has since been located and glued back on by the way Next job will be to weather it "extensively" at the wish of its owner so don't blame me Fair dues lad, great stuff. 1 1 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 4, 2023 Share Posted March 4, 2023 I'm not sure if "extensively" was the exact wording used. It was more like "do your worst" ... I guess I owe you an Abrakebabra if I ever get off the island and get my back side up to the Raheney show. Quote Link to comment Share on other sites More sharing options...
MOGUL Posted March 4, 2023 Share Posted March 4, 2023 10 minutes ago, DJ Dangerous said: I'm not sure if "extensively" was the exact wording used. It was more like "do your worst" ... I guess I owe you an Abrakebabra if I ever get off the island and get my back side up to the Raheney show. Due to be Blackrock this year I think, will have to spring for a foive goys! 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 4, 2023 Share Posted March 4, 2023 1 minute ago, MOGUL said: Due to be Blackrock this year I think, will have to spring for a foive goys! The SOUTHSIDE??? Ugh, I think I'm allergic to crossing the Liffey. 1 1 3 Quote Link to comment Share on other sites More sharing options...
Broithe Posted March 4, 2023 Share Posted March 4, 2023 23 minutes ago, murphaph said: Next job will be to weather it "extensively" at the wish of its owner so don't blame me I once saw a 66 at Holyhead, that, apart from the sweeps of the wipers, looked like the whole thing had just been given a nice even coat of Halfords grey primer. I wasn't in a position to record the image, unfortunately. 1 1 Quote Link to comment Share on other sites More sharing options...
DB JOE Posted March 4, 2023 Share Posted March 4, 2023 Studio Scale Models did a brass etch detail kit for the the Silverfox A class which included wipers. Brilliant work on the repair!!! 1 1 1 Quote Link to comment Share on other sites More sharing options...
murphaph Posted March 4, 2023 Author Share Posted March 4, 2023 32 minutes ago, DB JOE said: Studio Scale Models did a brass etch detail kit for the the Silverfox A class which included wipers. Brilliant work on the repair!!! DJ has been trying to get in touch with Des about 071 wipers without much success AFAIK. @DJ Dangerous ? 2 Quote Link to comment Share on other sites More sharing options...
Flying Snail Posted March 4, 2023 Share Posted March 4, 2023 1 hour ago, DJ Dangerous said: I find your lack of faith disturbing, and theirs. Well done @murphaph! Clearly the force is strong in you. Would 3D printing be an option for the wiper, or maybe resin casting a copy from one of the remaining wipers??? 1 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 4, 2023 Share Posted March 4, 2023 22 minutes ago, murphaph said: DJ has been trying to get in touch with Des about 071 wipers without much success AFAIK. @DJ Dangerous ? Spoke with @Weshty at the start of January regarding 071 wipers and he said: "I don't have any 071 wipers at the moment and it will be a while before I get a new order in. I'll let you know." I never asked about A Class wipers at the time as I didn't realise that 048 was missing one, but I assume it's the same scenario. 1 Quote Link to comment Share on other sites More sharing options...
murphaph Posted March 4, 2023 Author Share Posted March 4, 2023 48 minutes ago, Flying Snail said: Well done @murphaph! Clearly the force is strong in you. Would 3D printing be an option for the wiper, or maybe resin casting a copy from one of the remaining wipers??? The wipers are filigrane so taking a cast is a no go really. They are so filigrane as to be difficult to see to be honest! We'll probably just live with the missing wiper and say it was lost in real life. 3 Quote Link to comment Share on other sites More sharing options...
flange lubricator Posted March 4, 2023 Share Posted March 4, 2023 Perhaps Shawplan for wipers Phillip Shawplan - Fittings 2 1 Quote Link to comment Share on other sites More sharing options...
murphaph Posted March 4, 2023 Author Share Posted March 4, 2023 Cheers Mark. I will let DJ make enquiries if he wants to. I never got a response from Shawplan when I tried to order window etches in the past. 1 Quote Link to comment Share on other sites More sharing options...
John-r Posted March 4, 2023 Share Posted March 4, 2023 Did not doubt you for one minute Philip, just knew that if anyone could make a good job of it , it would be yourself, well done. Cheers John. 1 1 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 5, 2023 Share Posted March 5, 2023 I thought that this project would have been more challenging for you. I'm disappointed that a write-off was so easy to sort. I'll have to put more thought into your next challenge. Maybe some sort of global scavenger hunt to recover the shattered pieces, first. 1 4 Quote Link to comment Share on other sites More sharing options...
irishthump Posted March 5, 2023 Share Posted March 5, 2023 On 4/3/2023 at 5:37 PM, murphaph said: The crack to the body is going to have to be hidden under weathering. The missing wiper can't be hidden unfortunately and as DJ says IRM don't have any spares like that or none available to the public at least so she shall remain wiperless on that side. I am sure some wipers broke off on the prototype. The main thing is she is back together and running again. I had to completely remove the main PCB to get in at the worm gears etc. There wasn't enough slack in the pickup wires to push the PCB to one side in this case so I had to desolder the pickups as well as the motor leads and lift the PCB + cab interiors out and off the chassis. The cab interiors sit firmly but will release with a bit of wiggling. They are an awful lot easier to strip down than the MM locos it has to be said. The missing horn has since been located and glued back on by the way Next job will be to weather it "extensively" at the wish of its owner so don't blame me Great result! Hats off to you with this, it sure as hell looked like a goner.... 1 1 1 Quote Link to comment Share on other sites More sharing options...
Broithe Posted March 5, 2023 Share Posted March 5, 2023 8 hours ago, DJ Dangerous said: I thought that this project would have been more challenging for you. I'm disappointed that a write-off was so easy to sort. I'll have to put more thought into your next challenge. Maybe some sort of global scavenger hunt to recover the shattered pieces, first. Three locos, put through a mincer, all the bits supplied in the one plastic bag, no prior identification. Let's see how good he really is. 4 Quote Link to comment Share on other sites More sharing options...
jhb171achill Posted March 5, 2023 Share Posted March 5, 2023 On 4/3/2023 at 6:02 PM, DJ Dangerous said: The SOUTHSIDE??? Ugh, I think I'm allergic to crossing the Liffey. With all the brexit stuff now, we all have to get inoculations, passports and masks, and negotiate supply chain issues at the Ha'penny bridge........... 1 3 Quote Link to comment Share on other sites More sharing options...
irishmail Posted March 5, 2023 Share Posted March 5, 2023 (edited) 39 minutes ago, jhb171achill said: With all the brexit stuff now, we all have to get inoculations, passports and masks, and negotiate supply chain issues at the Ha'penny bridge........... I will have to cross the Shannon as well as the Liffey if I visit Dublin!! Edited March 5, 2023 by irishmail 2 Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted March 5, 2023 Share Posted March 5, 2023 2 hours ago, Broithe said: Three locos, put through a mincer, all the bits supplied in the one plastic bag, no prior identification. Let's see how good he really is. i have an even better idea. Next time he's down here, I throw the three of them off the balcony so he has to scavenge the fragments, first. Giving him all of the pieces just makes it too easy. He needs to work at the next one. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.