JasonB Posted May 30, 2019 Posted May 30, 2019 4 hours ago, irishthump said: As I said on other media this should get a certain cohort of ar**holes off of PM's back! Spot on thump, couldn't agree more. There's one or two on here guilty of continuous whining regarding the 121 project of late (they know who they are). Yet these are the same individuals who will be first to post on here gushing over the model when it's finally released. I've said it before and I'll say it again, some people are never happy. 3 Quote
RedRich Posted May 30, 2019 Posted May 30, 2019 33 minutes ago, JasonB said: Spot on thump, couldn't agree more. There's one or two on here guilty of continuous whining regarding the 121 project of late (they know who they are). Yet these are the same individuals who will be first to post on here gushing over the model when it's finally released. I've said it before and I'll say it again, some people are never happy. Agree Jason we all know who the main complainant and moaner is. He's been bad mouthing other manufacturers behind their backs also and being as nice as pie to them on here. Two faced and untrustworthy individual. Great to see the model progressing nicely and when it is released it is released, patience is the key. Rich, 2 Quote
JasonB Posted May 30, 2019 Posted May 30, 2019 (edited) 30 minutes ago, RedRich said: Agree Jason we all know who the main complainant and moaner is. He's been bad mouthing other manufacturers behind their backs also and being as nice as pie to them on here. Two faced and untrustworthy individual. Great to see the model progressing nicely and when it is released it is released, patience is the key. Rich, Delighted to see the progress myself. Good things come to those who wait Rich. As proved by Mr Murphy in the past, and again with the 121 in the near future. Edited May 30, 2019 by JasonB Quote
NIRCLASS80 Posted May 30, 2019 Posted May 30, 2019 Looks good and great to see it progressing. Three ordered and can't wait. Quote
Irishswissernie Posted May 31, 2019 Posted May 31, 2019 (edited) On 4/18/2019 at 7:51 PM, BSGSV said: I think 133 had the two cab window's at the bonnet side blanked out also in IE livery. Rich, I was under the impression that 133 had had the windows blanked out so I did a bit of digging through my negs and video. Attached is a compilation of 133 in action in June 2001. The first parts where it backed down to North Wall along with 148 and then came back up the bank with a Belfast Liner looks as if the windows are plated over. However I caught the loco the Sunday after at Drogheda and it is apparent that they were just filthy. The loco however on both sides isn't IR or IE although other numbers etc are quite clear. Maybe somebody nicked the template or they had run out of paint! Ernie 133_N_Wall_+_Drogheda_June_2001_Medium.mp4 Edited May 31, 2019 by Irishswissernie Quote
Noel Posted May 31, 2019 Posted May 31, 2019 (edited) As a matter of interest what happened to the 141 and 181 fleet? Were they broken up, sold to scrap merchants, or put into long term storage? (ie aside from the preserved few). . . . and how many 121s are likely to be preserved, is it just the one? (ie 134). Edited May 31, 2019 by Noel 1 Quote
jhb171achill Posted May 31, 2019 Posted May 31, 2019 They were all scrapped, other than the few preserved and one or two in Inchicore earmarked for the RPSI. 2 Quote
warb Posted May 31, 2019 Posted May 31, 2019 refurb 131,122 and 134 and non refurb 122 regards warb 4 3 Quote
jhb171achill Posted May 31, 2019 Posted May 31, 2019 Things of beauty; that was a very attractive livery. 1 Quote
Alan564017 Posted June 1, 2019 Posted June 1, 2019 speaking of liveries, is it possible to see what the Murphy Models 121 liveries will be? if possible are there any pre-production pictures, not the CAD models. Quote
JasonB Posted June 1, 2019 Posted June 1, 2019 (edited) 3 hours ago, Alan564017 said: speaking of liveries, is it possible to see what the Murphy Models 121 liveries will be? if possible are there any pre-production pictures, not the CAD models. Planned liveries and running numbers are listed on previous page. https://irishrailwaymodeller.com/topic/3198-murphy-models-121/page/14/ Edited June 1, 2019 by JasonB Quote
Noel Posted August 31, 2019 Posted August 31, 2019 On 5/31/2019 at 7:34 PM, warb said: refurb 131,122 and 134 and non refurb 122 regards warb Thats a fantastic shot of 124 coupled up to Mk4 coach. Please forgive my lack of knowledge, but what does 'non-refurb 122' mean? Is it just a cosmetic restoration for display purposes? 1 Quote
Popular Post WRENNEIRE Posted April 22, 2020 Popular Post Posted April 22, 2020 At last some good news people End May delivery: MM0124, MM0129, MM0134. IE logo. So should be available to purchase after June 8th End June delivery: MM0121, MM0135 CIE grey. MM0125, MM0131 CIE Black, hopefully available after July 7th End July delivery: MM0126, MM0132 CIE supertrain. MM0127, MM0130, MM0133 IR logo, available early August As you are probably aware, shipping from China is somewhat erratic (and expensive) due to medical supplies getting priority, but PM is already working on it. All going well, he would hope to start shipping to retailers from 8th.June. No RRP yet Hip Hip....... 16 8 3 1 Quote
ttc0169 Posted April 22, 2020 Posted April 22, 2020 4 hours ago, WRENNEIRE said: At last some good news people End May delivery: MM0124, MM0129, MM0134. IE logo. So should be available to purchase after June 8th End June delivery: MM0121, MM0135 CIE grey. MM0125, MM0131 CIE Black, hopefully available after July 7th End July delivery: MM0126, MM0132 CIE supertrain. MM0127, MM0130, MM0133 IR logo, available early August As you are probably aware, shipping from China is somewhat erratic (and expensive) due to medical supplies getting priority, but PM is already working on it. All going well, he would hope to start shipping to retailers from 8th.June. No RRP yet Hip Hip....... Thank you for the update you have made my week Dave, 1 Quote
mphoey Posted April 23, 2020 Posted April 23, 2020 On 4/22/2020 at 5:52 PM, WRENNEIRE said: At last some good news people End May delivery: MM0124, MM0129, MM0134. IE logo. So should be available to purchase after June 8th End June delivery: MM0121, MM0135 CIE grey. MM0125, MM0131 CIE Black, hopefully available after July 7th End July delivery: MM0126, MM0132 CIE supertrain. MM0127, MM0130, MM0133 IR logo, available early August As you are probably aware, shipping from China is somewhat erratic (and expensive) due to medical supplies getting priority, but PM is already working on it. All going well, he would hope to start shipping to retailers from 8th.June. No RRP yet Hip Hip....... will be great to see them amazed that its only a month between groups but i suppose spacing originally would have ben better if this virus had not happened Quote
Noel Posted April 24, 2020 Posted April 24, 2020 Can't wait to get my hands on one of his Black'n'Tan livery ones and a super train livery. Can run them as a pair nose2nose or singly. A little out of my era but an Irish rail broken points logo with the dual tippex seems an essential 121 livery to have. That's 3 plus 1961 delivery grey is a must for any collector, that makes 4. Quote
WRENNEIRE Posted April 24, 2020 Posted April 24, 2020 3 hours ago, Georgeconna said: Any Prices Set? They will be close to €200 I reckon George, Dollar v Euro when payment is due will be the deciding factor. Dollar is strong at the moment and shipping will be expensive too. 2 Quote
jhb171achill Posted April 24, 2020 Posted April 24, 2020 Worth every cent. I've two ordered..... 1 Quote
Noel Posted April 24, 2020 Posted April 24, 2020 14 minutes ago, jhb171achill said: Worth every cent. I've two ordered..... Yes probably, but a price as high as €200 could well reduce the overall volume of sales over the next 18 months or so, especially competing for modellers budgets against other new much anticipated products later this year, and the CV19 effect. Hattons currently have them listed for equivalent of €170. Quote
Noel Posted April 24, 2020 Posted April 24, 2020 On 4/22/2020 at 5:52 PM, WRENNEIRE said: At last some good news people End May delivery: MM0124, MM0129, MM0134. IE logo. So should be available to purchase after June 8th End June delivery: MM0121, MM0135 CIE grey. MM0125, MM0131 CIE Black, hopefully available after July 7th End July delivery: MM0126, MM0132 CIE supertrain. MM0127, MM0130, MM0133 IR logo, available early August As you are probably aware, shipping from China is somewhat erratic (and expensive) due to medical supplies getting priority, but PM is already working on it. All going well, he would hope to start shipping to retailers from 8th.June. No RRP yet Hip Hip....... 1 3 Quote
WRENNEIRE Posted April 26, 2020 Posted April 26, 2020 From the horses mouth: As you know I will have dedicated chips for my forthcoming Class 121 loco. Details as follows. Note that catalogue numbers for the sound chips are different to those already advised. MM0006 Class 121 DCC SRP €36.95 MM0567 Class 121 DCC sound chip SRP €125.00 EMD 8-567CR NT MM0645 Class 121 DCC sound chip SRP €125.00 EMD 8-645E NT The software for these chips is designed, in conjunction with the PCB, specifically for the Class 121 loco. This software will not be available on any website. It has not been tested on my Class 141/181 locos and there is no claim on my part that it will operate in the required manner. Users do so at their own risk. A full list of functions will be available on my website in due course. The usual CVs will be variable as necessary. WARNING People who use 3rd party chips do so at their risk. There is no warranty on any damage that may arise. There are 2 removable parts on the top of the loco. The smaller one allows for access to 6 switches to operate the lights as appropriate in DC mode. For DCC they should all be in the on position. The larger aperture allows for the fitting of DCC chips. As a result of the foregoing, there is absolutely no need to open up the loco. Doing so risks damage, which may be expensive to repair. Note that the IP of these chips is the sole property of Murphy Models. The information supplied can be used by authorised dealers in the normal course of trade. All chips will be available first half of June. Modellers who heard early sound samples were very impressed. Stay safe. 5 1 2 Quote
Bentleypat Posted April 26, 2020 Posted April 26, 2020 What’s the difference between both sound chips? Quote
Old Blarney Posted April 26, 2020 Posted April 26, 2020 (edited) 54 minutes ago, Bentleypat said: What’s the difference between both sound chips? MM0006 Class 121 DCC SRP €36.95 (No Sound - Digital Command Control) MM0567 Class 121 DCC sound chip SRP €125.00 EMD 8-567CR NT (Sound Decoder representing the Sound for these Locomotives when delivered with their *GM 567 CA 8-Cylinder, twin bank, blower scavenged, developing 950 hp gross at 835 rpm, 875 hp traction. - Prior to engine transplants) MM0645 Class 121 DCC sound chip SRP €125.00 EMD 8-645E NT (Sound Decoder representing the Sound of these Locomotives from Transplanted Engines. Engines from from withdrawn C Class (201) Locomotives were installed in Class 121 Class Locomotives as and when it became necessary to replace engine power packs. *GM B-645 E 8 cylinder. twin bank, blower scavenged, developing 1,100 hp gross at 900 rpm, 1,040 hp traction. *Information taken from Irish Locomotives and Rolling Stock of Coras Iompair Eireann and Northern Ireland Railways - O.Doyle ans S. Hirsch Edited April 26, 2020 by Old Blarney 3 Quote
irishthump Posted April 26, 2020 Posted April 26, 2020 22 hours ago, WRENNEIRE said: From the horses mouth: As you know I will have dedicated chips for my forthcoming Class 121 loco. Details as follows. Note that catalogue numbers for the sound chips are different to those already advised. MM0006 Class 121 DCC SRP €36.95 MM0567 Class 121 DCC sound chip SRP €125.00 EMD 8-567CR NT MM0645 Class 121 DCC sound chip SRP €125.00 EMD 8-645E NT The software for these chips is designed, in conjunction with the PCB, specifically for the Class 121 loco. This software will not be available on any website. It has not been tested on my Class 141/181 locos and there is no claim on my part that it will operate in the required manner. Users do so at their own risk. A full list of functions will be available on my website in due course. The usual CVs will be variable as necessary. WARNING People who use 3rd party chips do so at their risk. There is no warranty on any damage that may arise. There are 2 removable parts on the top of the loco. The smaller one allows for access to 6 switches to operate the lights as appropriate in DC mode. For DCC they should all be in the on position. The larger aperture allows for the fitting of DCC chips. As a result of the foregoing, there is absolutely no need to open up the loco. Doing so risks damage, which may be expensive to repair. Note that the IP of these chips is the sole property of Murphy Models. The information supplied can be used by authorised dealers in the normal course of trade. All chips will be available first half of June. Modellers who heard early sound samples were very impressed. Stay safe. I know you might not have the answers to these questions but I'll ask anyway! 1) Are the decoders definitely being produced by ESU? 2) Any idea who is producing the actual soundfile for the sound decoders? 3) Did PM actual obtain new sound recordings of the engine types in question? 1 Quote
Keitheg6 Posted May 2, 2020 Posted May 2, 2020 Has anyone pre-ordered from Mark's? I've been trying to contact them but with current restrictions it's a pain , are they taking deposits ? Quote
Edo Posted May 2, 2020 Posted May 2, 2020 I've pre ordered 3 - probably this time last year - I might give them a bell on Tuesday to see what the craic is.....no change on the website yet. Quote
JasonB Posted May 2, 2020 Posted May 2, 2020 Like Edo, I have a deposit down on three, IE livery. Paid it about 6 months back. I recieved the monthly newsletter by email during the week with the release schedule attached, but with no prices as yet. Quote
.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.