WRENNEIRE Posted July 24, 2020 Share Posted July 24, 2020 Thought so, very noticeable on 122 . Nice paint job, by the way 121 looks a lot better body wise, stratification not as noticeable Quote Link to comment Share on other sites More sharing options...
Robert Shrives Posted July 24, 2020 Share Posted July 24, 2020 3 hours ago, WRENNEIRE said: Thought so, very noticeable on 122 . Nice paint job, by the way 121 looks a lot better body wise, stratification not as noticeable Interestingly ( to hijack for a moment) Shapeways have announced a partnership with a supplier who is offering the materials used in some private printers that give much better results. I have a collection of 3mm items from a 3mm society member that puts Shapeways in a "cocked hat." Also to add Great work on the 121 and I look forward to the finished work. Robert 1 Quote Link to comment Share on other sites More sharing options...
DiveController Posted July 24, 2020 Share Posted July 24, 2020 (edited) That BnT turned out nicely despite the modern LED light clusters. Yet the ST liveried version seems to display the line from the 3D print, maybe the BnT livery hides then better? Just wondering about the retained CIE logo on the front cab, usually they stuck a smaller IR over it until they got the Tippex stripes but tbh I don't recall (m)any 121 in transitional livery whereas it was pretty common with 141 and A iirc? Edited July 24, 2020 by DiveController Quote Link to comment Share on other sites More sharing options...
Noel Posted July 25, 2020 Share Posted July 25, 2020 13 hours ago, DiveController said: That BnT turned out nicely despite the modern LED light clusters. Yet the ST liveried version seems to display the line from the 3D print, maybe the BnT livery hides then better? Just wondering about the retained CIE logo on the front cab, usually they stuck a smaller IR over it until they got the Tippex stripes but tbh I don't recall (m)any 121 in transitional livery whereas it was pretty common with 141 and A iirc? No Kevin, I spent many hours rubbing down the B&T body to smooth out the 3D artefacts. I couldn't have been assed to do the same for 122 nor B130 as the MM 121s are on the way. The duck test applies. 1 Quote Link to comment Share on other sites More sharing options...
DiveController Posted July 25, 2020 Share Posted July 25, 2020 Ah, understandable! I guess the surface is still somewhat uneven on the 3D prints. Now the there is a OO 121 I guess these 3-D printed models will probably phase out although maybe useful in another gauge. I suppose with the current 3D print quality it may not be as useful in N gauge though but maybe better than nothing. Still it was a good bridge until the impending 121s arrived 1 Quote Link to comment Share on other sites More sharing options...
Robert Shrives Posted July 25, 2020 Share Posted July 25, 2020 Shapeways print mediums have changed over the years and WSF - white strong flexible that B1Lancer used for the 121 now is unavailable. Smooth detail and smoothest detail while more expensive give a better finish and some N prints I have had from Recreation 21 are much better. This still eclipsed by some home printers using PLA - I have had from Lenny Sweenny via ebay in 3mm have been as good as production plastic models. It was good to read Shapeways have in partnership with a materials supplier overhauled the range of materials available - but it seems the originator has to upload materials choices or you get the cheapest option by default which is a WSF furry lookalike. So hopefully if folk play ball Shapeways will continue to provide a good resource for modellers and many other users. I do agree that sanding SWF is nigh on impossible and that the Normal viewing distance and some imagineering will help (gloss over) the layering. Robert 1 Quote Link to comment Share on other sites More sharing options...
DiveController Posted July 25, 2020 Share Posted July 25, 2020 Some weathering will probably help a lot too Quote Link to comment Share on other sites More sharing options...
BSGSV Posted August 5, 2020 Share Posted August 5, 2020 On 7/6/2020 at 11:25 PM, flange lubricator said: I think all of the 121 class had the modified smaller window except 125 . Just saw a photo of 125 which also had the small front window. Quote Link to comment Share on other sites More sharing options...
flange lubricator Posted August 5, 2020 Share Posted August 5, 2020 32 minutes ago, BSGSV said: Just saw a photo of 125 which also had the small front window. I stand corrected, that means the whole class received this modification then . Quote Link to comment Share on other sites More sharing options...
irishthump Posted August 5, 2020 Share Posted August 5, 2020 On 7/25/2020 at 2:49 PM, DiveController said: Ah, understandable! I guess the surface is still somewhat uneven on the 3D prints. Now the there is a OO 121 I guess these 3-D printed models will probably phase out although maybe useful in another gauge. I suppose with the current 3D print quality it may not be as useful in N gauge though but maybe better than nothing. Still it was a good bridge until the impending 121s arrived Despite all the hype around the advances is 3D printing, it's still a long way off being good enough for quality modelling in OO gauge let alone N gauge. 1 Quote Link to comment Share on other sites More sharing options...
jhb171achill Posted August 5, 2020 Share Posted August 5, 2020 I have no experience of 3D print stuff, other than Silverfox models (am I right in believing that their stuff is produced this way?), so having noted the above, I wonder what opinions there might be about its suitability for "0" gauge? A friend is currently putting together an "0" scale shunting layout, and I would pass on to him any relevant opinions....... Quote Link to comment Share on other sites More sharing options...
irishthump Posted August 5, 2020 Share Posted August 5, 2020 15 minutes ago, jhb171achill said: I have no experience of 3D print stuff, other than Silverfox models (am I right in believing that their stuff is produced this way?), so having noted the above, I wonder what opinions there might be about its suitability for "0" gauge? A friend is currently putting together an "0" scale shunting layout, and I would pass on to him any relevant opinions....... Silver Fox are moulded resin, so the finish is a lot smoother. Whatever scale your modelling in a 3D printed model will require some finishing to removing print lines but if you're prepared to put in some work or if you can live with a cruder finish then there's no reason not to use printed models in O gauge. 1 Quote Link to comment Share on other sites More sharing options...
Noel Posted August 5, 2020 Share Posted August 5, 2020 5 minutes ago, irishthump said: Silver Fox are moulded resin, so the finish is a lot smoother. Whatever scale your modelling in a 3D printed model will require some finishing to removing print lines but if you're prepared to put in some work or if you can live with a cruder finish then there's no reason not to use printed models in O gauge. I've seen the results of a pals resin 3D printer, much higher resolution that Shapeways. But agree low cost 3D is a long way off IMP for detail and smoothness. Quote Link to comment Share on other sites More sharing options...
Galteemore Posted August 5, 2020 Share Posted August 5, 2020 7mm modellers tend to use 3D printing more for detail parts and accessories rather than ‘solid’ items like wagons. 1 Quote Link to comment Share on other sites More sharing options...
David Holman Posted August 5, 2020 Share Posted August 5, 2020 Mark Clark - Locos n Stuff - does 3D printed models and parts to a very high standard. A Chatham Club member, have seen his work first hand and the finish is very good indeed. His website is Locosnstuff.com and well worth a look. 1 Quote Link to comment Share on other sites More sharing options...
murphaph Posted August 11, 2020 Share Posted August 11, 2020 Does anyone have any idea will all the tippex 121s make it to the UK retailers before January 1st (end of Brexit transition phase)? Quote Link to comment Share on other sites More sharing options...
WRENNEIRE Posted August 12, 2020 Share Posted August 12, 2020 Dont tell anyone I showed you these, I will be sacked (again) No stupid questions please Noel, these are all I have! 8 1 Quote Link to comment Share on other sites More sharing options...
Noel Posted August 12, 2020 Share Posted August 12, 2020 5 minutes ago, WRENNEIRE said: Dont tell anyone I showed you these, I will be sacked (again) No stupid questions please Noel, these are all I have! Dave, what time is it please? 2 Quote Link to comment Share on other sites More sharing options...
abaddon Posted August 13, 2020 Share Posted August 13, 2020 Anyone doing weathering on these or is it too early for that? Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 13, 2020 Share Posted August 13, 2020 Got an e-mail from Hattons with photos of the 121's as painted samples. They expect the silver/yellow in August 2020 with the rest to follow later. 1 Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 13, 2020 Share Posted August 13, 2020 (edited) Having a good look at 135 and I see it has the sand filler high up on the front of the nose. One thing I am not taken with are the high level hand rails along the side. They look very "plasticky", might be just the photo perspective. Also the body looks to be coloured plastic and not spray painted. Probably wrong but that is the impression I get. I will need to see one in the flesh to give it a proper examination. Edited August 13, 2020 by spudfan Quote Link to comment Share on other sites More sharing options...
Georgeconna Posted August 13, 2020 Share Posted August 13, 2020 6 hours ago, spudfan said: Having a good look at 135 and I see it has the sand filler high up on the front of the nose. One thing I am not taken with are the high level hand rails along the side. They look very "plasticky", might be just the photo perspective. Also the body looks to be coloured plastic and not spray painted. Probably wrong but that is the impression I get. I will need to see one in the flesh to give it a proper examination. Hi Spudfan, I was gonna make that suggestion too after a couple of gawks of the piccys, the Grey version look very plastic with the Yellow Printed on. Time will tell I spose when you get one in the hand. Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 13, 2020 Share Posted August 13, 2020 (edited) So it'll be a 270 km trip down to Marks Models to have a look at one.... Edited August 13, 2020 by spudfan Quote Link to comment Share on other sites More sharing options...
Wexford70 Posted August 14, 2020 Share Posted August 14, 2020 Yeah will have to wait and see the final model first hand. Settling for coloured plastic rather than a top quality spray coat would be disappointing but unfortunately it has happened before as with the super train MK2s. Just could not bring myself to spend the money. Quote Link to comment Share on other sites More sharing options...
DJ Dangerous Posted August 14, 2020 Share Posted August 14, 2020 5 minutes ago, Wexford70 said: Yeah will have to wait and see the final model first hand. Settling for coloured plastic rather than a top quality spray coat would be disappointing but unfortunately it has happened before as with the super train MK2s. Just could not bring myself to spend the money. I have a feeling that they will be painted after reading these posts: On 7/2/2020 at 1:58 AM, WRENNEIRE said: No definite dates yet, but the latest I have heard is that the Grey locos will be the first to arrive, some problem arose and now it looks like the IE's are held up and the greys will be here first, they will be shipped this month. On 7/2/2020 at 1:00 PM, WRENNEIRE said: No George, something to do with paint not taking, there are 3 different forms of plastic on the body and I think there was a reaction with one of them (EBay looking good for you atm!!!) 2 Quote Link to comment Share on other sites More sharing options...
Noel Posted August 14, 2020 Share Posted August 14, 2020 (edited) Nothing a little bit of gentle weathering cannot fix. Worked Ok for other bright plastic models. 121s look great, the black’n’tan is the pick of the bunch, stunning. Edited August 14, 2020 by Noel 1 Quote Link to comment Share on other sites More sharing options...
Noel Posted August 14, 2020 Share Posted August 14, 2020 PS: With some unpainted plastic models a trick is to first spray with a coat of matt varnish (protecting windows with masking or they'll go milky), then apply weathering which takes to the matt varnish much better than directly onto plastic. The Matt varnish can also help get rid of the fisher price toy look of some models coloured only by their plastic. 3 Quote Link to comment Share on other sites More sharing options...
WRENNEIRE Posted August 26, 2020 Share Posted August 26, 2020 Unboxing a 121 take it out.mp4 2 Quote Link to comment Share on other sites More sharing options...
connollystn Posted August 26, 2020 Share Posted August 26, 2020 @wrenneire Does this mean they've arrived? Quote Link to comment Share on other sites More sharing options...
Edo Posted August 26, 2020 Share Posted August 26, 2020 Do we need to go into training (excuse the pun) for this? Quote Link to comment Share on other sites More sharing options...
Sails Posted August 26, 2020 Share Posted August 26, 2020 Nice alternative to the standard plastic blister packaging. Model is not too bad either. Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 26, 2020 Share Posted August 26, 2020 I signed up with a supplier to be notified by email when it arrives in stock. No email as of yet. Quote Link to comment Share on other sites More sharing options...
Warbonnet Posted August 26, 2020 Share Posted August 26, 2020 6 minutes ago, spudfan said: I signed up with a supplier to be notified by email when it arrives in stock. No email as of yet. They are not in stock yet. The video is from the factory. Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 26, 2020 Share Posted August 26, 2020 That clears that up. Quote Link to comment Share on other sites More sharing options...
spudfan Posted August 26, 2020 Share Posted August 26, 2020 2 minutes ago, spudfan said: That clears that up. P.S. It is rumoured that they are travelling overland in batches under their own power utilising the multiple unit control facility. Seems there is a delay due to bogie changes to accommodate different gauges 1 1 2 Quote Link to comment Share on other sites More sharing options...
.png.c363cdf5c3fb7955cd92a55eb6dbbae0.png){kind=logo}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.